The title of one of the most original New Year’s decorations can be safely received by a do-it-yourself Christmas tree made of plastic bottles. It has an unusual and interesting appearance, and it does not require a lot of improvised materials to create it. Even someone who has not previously been engaged in needlework and does not know where to start can make such a craft. There are many step-by-step instructions and master classes that will help with this.
How to make a Christmas tree from plastic bottles
The most important thing is to decide on the size of the future Christmas tree, because it directly depends on how much material is needed.
A small spruce will take a few bottles, while a large growth tree will require more material. The style of performance is also an important factor. If there is absolutely no experience in creating such crafts, then it is better to choose a simpler option. Having trained on simple and small Christmas trees, you can safely move on to making more labor-intensive options.
Small Christmas tree made from plastic bottles
Even a small Christmas tree made from several bottles can decorate a room. For its manufacture you will need:
- 3 plastic bottles;
- Scotch;
- thick paper, one sheet;
- scissors.
- The first step is to cut off the neck and bottom, so that only a small pipe remains. It is a blank for future branches.
- In order to give the Christmas tree a conical shape, you need to make blanks of different sizes. Cut each of the three bottles lengthwise into three parts, then adjust the dimensions so that each of the tiers is smaller than the previous one. Next, dissolve the parts of the bottle into spruce needles.
- Then take the paper and roll it into a tube, then insert it into the neck of one of the bottles and secure it in a circle with tape. It remains only to put all the tiers on the tube, fix them and fluff them. You can leave the top as it is, or add a decorative element in the form of an asterisk or a bow.
Big Christmas tree made from plastic bottles
An original solution would be to use a Christmas tree made of plastic bottles, instead of the usual artificial or live one. It will take some time to create it, but the result will justify itself.
You need:
- elements for a tree frame (you can use a PVC pipe or make it from wooden slats);
- a large number of plastic bottles (they will need a lot);
- wire;
- spray paint in cans: 3 green and 1 silver;
- scissors or utility knife;
- drill;
- insulating tape.
- Creating a frame is one of the most time-consuming processes. Side paws are attached to the central pipe, you immediately need to make sure that it will be convenient to string branches on them in the future. In the upper part of the paws and in the pipe itself, you need to drill holes and insert the wire there. This is important for the strength of the structure so that it does not fall apart in the future. In the middle between the side legs, you can insert one plastic bottle. It will not allow the paws to move towards the center. Special attention should be paid to the fact that the paws should not touch the floor.
- Now you can start creating spruce branches. First, cut off the bottom of the bottle.
- Next, cut the bottle lengthwise into strips of about 1,5-2 cm, but without cutting to the neck.
- Then the bottle is cut into small strips, it turns out like Christmas tree needles.
- The strips must be folded completely from the neck. And in the place where the chopped needles go, bend down a little, this will create a fluffing effect. You also need to remember to cut off the ring on the neck.
- Finished twigs need to be painted green. Do it on one side only.
- You can start collecting the Christmas tree. Ready spruce legs are strung on the lower part of the spruce, after turning it upside down. The necks should be strictly below. On the lowest branches, you need to screw the cap onto the neck, then drill a hole and insert the wire. This will allow the branches not to fall under their own weight.
- To make the tree look like a real tree, the branches in the upper part of the tree should gradually taper.
- The finished Christmas tree is placed on a stand. For a more beautiful look, the tips of the branches can be tinted with silver paint, this will create the effect of frosty frost. The big fluffy beauty is ready, all that remains is to dress her up with tinsel and balls.
Fluffy Christmas tree made from plastic bottles
Budget and elegant decoration is suitable for the New Year’s table.
You need:
- bottle;
- scissors;
- Scotch;
- thick cardboard.
First you need to make a tube out of cardboard. You can take ready-made, for example, from paper towels. Now you can start making parts for the future Christmas tree. Take a plastic bottle and cut it into three parts, which will differ in length. From each plastic pipe you need to make a fringe. It remains to glue the longest fringe at the base of the cardboard pipe with adhesive tape. A little higher stick the one that is shorter. And so to the very foundation. The length of the fringe should constantly decrease. The top can be decorated with an asterisk, ribbon or cone, or left as you wish.
This Christmas tree, made by hand, looks very festive.
A small Christmas tree made from plastic bottles in a pot
To make such an ornament, you need to prepare the following materials:
- flexible wires, thick and thin;
- plastic bottles, preferably green;
- scissors;
- a candle;
- lighter;
- woolen threads of two colors: brown and green;
- pot;
- gypsum or any other mixture;
- cotton wool;
- glue;
- decorations.
Technology:
- The first step is to prepare the trunk for the future homemade Christmas tree. You need to take several identical pieces of wire and twist them together. On one side, the ends are bent, inserted into a pot and poured with gypsum mortar. The trunk for the tree is ready.
- While the trunk dries up, it is worth doing the manufacture of branches. First come the needles. From a plastic bottle, you need to cut off the bottom and neck, and cut the rest into identical strips. The wider the strip, the longer the needle will be. It is not necessary to make the stripes perfectly even; in the future, small flaws will not be noticeable.
- On each strip you need to make a fringe. These will be the needles of the fluffy beauty. The smaller and better the fringe is made, the more beautiful the appearance of the product will be at the end.
- The next item is the manufacture of branches. On one strip of fringe in the corner you need to make a small hole. Then cut off a piece of thin wire and put it through the hole, bending it in half. The ends are twisted together. It should turn out the same as in the image below.
- Next, you need to start gently winding the fringe onto the wire, while slightly melting the smooth edge with a lighter. Thanks to this, the strip will fit snugly to the base.
- Part of the wire must be left without needles, it will later be wound around the base of the Christmas tree. It looks like a finished spruce branch, made by hand. How many such blanks are needed, you need to determine yourself, based on the length of the product.
- Collect the Christmas tree start from the top. First, the crown is attached, this is the shortest part. The bare ends wrap around the trunk.
- The remaining branches are attached at approximately equal distance, depending on the length.
- In order for the trunk to look beautiful, it can be wrapped with a dense layer of green threads. Put cotton wool in a pot, it will imitate snow. You can decorate the finished product with toys and tinsel.
Simple MK Christmas tree from a plastic bottle
Making this Christmas tree is quick and easy. The base is made of cardboard, it will need to be rolled into a tube and glued. The very same Christmas tree is better to do according to the instructions:
- Cut off the bottom of the bottle. The rest of the cut into equal strips, not reaching the neck.
- Parts of the bottles should be different in size, they need to be prepared depending on what size the tree will have. In this case, it turned out 6 such blanks with a fringe.
- Branches fluff in different directions. Next, you need to apply glue, in small drops.
- The branches of the future Christmas tree are strung on a cardboard base. The sequence must be strictly in size.
- The Christmas tree stand also needs to be made from the neck of the bottle. Cut off this part, put it on the surface with the neck up and put the finished product on top. It turned out such a simple Christmas tree.
Original homemade Christmas tree from plastic bottles
This Christmas tree, made by hand, looks very elegant and festive.
Despite the appearance, it is very simple to make it even for a beginner:
- Take a bottle, cut off its bottom and neck. Next, cut the needles
- Attach the resulting blank to the base of the spruce with adhesive tape.
- Spruce needles can be immediately bent to the sides. Next, you need to make a few more of the same blanks according to the scheme. Their number depends on the size of the craft.
- The top of the tree can be glued to any glue.
- Christmas tree branches can be melted, then you get beautiful bends.
- Then it remains only to decorate the product with beads, bows, small balls. A paint can is used here as a stand, but you can choose another material at hand. It turns out an elegant and festive Christmas tree, which will perfectly fit into the New Year’s celebration.
Conclusion
A do-it-yourself Christmas tree made of plastic bottles is rightfully the most interesting option for creating a symbol of the New Year. Plastic trees are simple in execution, and most importantly – their options are very diverse. Everyone will find a suitable design and size for themselves. You can also connect your imagination and create a unique plastic Christmas tree with your own hands.
