Carp killer tackle: how to do it yourself, fishing technique

This tackle is used in feeder fishing, although it is considered non-sporting due to the peculiarities of its use. The fact is that the equipment is designed in such a way that bites are not fully transmitted to the tip of the feeder. This is due to the fact that the tackle includes 3 feeders and a sinker, which the fish are not able to budge, especially such as crucian carp. As a result of the resistance, the fish self-secrets. This factor is decisive in determining its non-sportiness.

The philosophy of sports fishing lies in the moment of hooking the fisherman, taking the bait in his mouth, the fish. The bite moment is transmitted to the tip of the rod or other bite signaling device. The task of the fisherman is to determine the moment of bite and make a cut. Such fishing is a sport.

Advantages of crucian killer gear

1. In the presence of 3 feeders, there is no need for frequent feeding of the biting point.
2. The presence of 3 hooks increases the probability of catching fish by 3 times.
3. It is possible to use for fishing not only for crucian carp, but also for bream, roach, carp, carp, etc.

Snap Disadvantages

1. Low sensitivity does not allow you to determine the moment of bite. The tip of the rod can only signal the fact of catching fish, and then only large specimens.
2. There is a high probability of weaving leashes with hooks, as well as feeders. With proper installation, this probability can be minimized.
3. Irrational use of feeders and leashes with hooks. Ideally, one feeder and one leash with a hook are enough. With a good organization of the fishing process, one feeder can be used quite effectively.

Ideal for catching crucian carp is such equipment as paternoster, which is quite sensitive when fishing on a muddy bottom.

For fishing in the current, it is better to use a helicopter rig and two knots. This equipment allows the bait to be at some distance from the bottom, which makes it very noticeable to the crucian.

After analyzing the advantages and disadvantages, we can immediately say that crucian killer tackle not suitable for biting small specimens. Weak bites will not be able to be transmitted to the tip of the rod. This means that fishing will be carried out almost blindly, and the time the gear is in the water will be determined by the time the feed is washed out of the feeders. Pulling the tackle out of the water, it will be possible to check the presence of fish on the hook.

How to make do-it-yourself tackle “Killer carp”

Such tackle can be purchased at a fishing store, but you can make your own. As a rule, most anglers make their own gear, for fun.

To do this, you must purchase the following items:

• Monofilament fishing line, 0,3 mm in diameter.
• Weight with an eye (from 30 to 5 g).
• Carabiner with swivel.
• Feeding troughs of the “spring” type without loading.
• Hooks, depending on the loot offered. Large hooks should not be used for crucian carp.

Installation of gear in stages:

1. A swivel with a carabiner should be attached to the sinker.
2. Feeders of the “spring” type are connected with each other by pieces of fishing line, 7-10 cm long. In the “springs” there may be through holes through which the fishing line is pulled. Rubber stoppers are installed between the feeders, while the feeders should not hang out. If there are no through holes, then the feeders are tightly connected to each other, using, for example, a “clinch” knot.
3. A small loop is formed at the end of the main line.
4. Leashes with hooks are tied to the feeders, 3-5 cm long. It is better to use fluorocarbon, as it is hardly noticeable in the water and crucian carp will try bait without any alertness.

Technique of fishing

This tackle, like everything with feeders, is designed for feeder (bottom) fishing. The technique is almost the same, and the differences lie in the type of gear used.

Feeding strictly one point:

1. To begin with, a certain point in the water area of ​​uXNUMXbuXNUMXbthe reservoir is fed. To do this, you should choose such a place, having studied the bottom topography with the help of a weight attached to the fishing line. This is if fishing is carried out on an unfamiliar reservoir, and on a familiar reservoir, fishermen know every hole, every bump.
2. The tackle is thrown into a clearly defined place, focusing on a characteristic object located on the opposite bank. After casting, the rod rests on the stand, after which the line is pulled up and fixed on the reel clip.
3. All subsequent casts will be performed in the same place, thanks to the fixation of the fishing line. At the same time, you should master the technique of casting tackle with a fixed line, otherwise the tackle can be cut off or the rod broken. Casts should be soft and calculated. At the moment of impact, when all the fishing line is pulled out, you need to move the rod forward to soften the blow. After that, the fishing rod lies on the stand and a bite is expected.

Catching process

In the spring-autumn period, the fish prefers baits of animal origin, such as worm, maggot, bloodworm, etc. In the summer heat, crucian carp can be interested in baits of plant origin, they can be: corn, pearl barley, bread, peas, etc.

Particular attention should be paid to the preparation of bait, on which the entire outcome of fishing may depend. In order not to bother, you can purchase a ready-made dry mix and just add water. You can mix homemade and ready mix. The result could be much better. The main thing is that the mixture works and attracts crucian carp. Moreover, it is not a problem to attract crucian carp – the problem is to keep it in the place of biting for a long time, and it is unlikely that it will be possible to do this without properly prepared bait.

After casting the tackle, it remains only to wait for bites. If there are no bites, then the tackle should be recast, as the bait is washed out of the feeders and the next portion must be fed. In the event of a further absence of bites, you can experiment with nozzles. Given the fact that the tackle has three hooks, it is possible to put a separate bait on each hook: on one worm, on the other corn, and on the third – maggot. Thus, you can find out which nozzle crucian prefers at the moment.

As you can see from the description, do crucian killer tackle not difficult, even by yourself, the main thing is that all the necessary elements are at hand. It is much more difficult to catch fish with this tackle, especially since you can catch any fish. The presence of 3 feeders makes it not as practical as the usual feeder tackle with a “Method” type feeder. The presence of a thick fishing line makes it not so “thrown”, and with a thin fishing line it is quite problematic to throw three feeders, and even a sinker. The sinker here plays the role of an additional element of tackle, which does not allow the feeders to overlap during the flight.

The effectiveness of tackle will depend on many factors, including the consistency of the bait. Incorrectly mixed bait will not be able to fully fulfill its purpose. At the same time, it should also be remembered that the task of the fisherman is not to feed the fish, but to do everything so that she has an appetite. For this, as a rule, one feeder is enough. The density of the bait should be different when fishing in the current and in still water. Bait should be washed out of the feeder no more than 5 minutes. Therefore, we can safely say that bottom (feeder) fishing is active fishing and you won’t be bored near the fishing rod.

In other words, to say, this is an interesting type of outdoor activity, for which there are practically no alternatives. And it is not surprising that on weekends, the banks of large and small rivers, ponds, lakes are literally “dotted” with fishermen.