If you find error F59 on the Bosch machine display, then you need to check the 3D sensor. In this article, we will analyze what you can do yourself without calling the wizard.
Today, the Bosch washing machine is a guarantee of high-quality and durable washing. However, no machine is immune from breakdowns. And if the Bosch CM is broken, you should not blame the manufacturer ahead of time. On the contrary, he made sure that you were the first to know about the breakdown and urgently took action.
To do this, fault codes light up on the screen. To find out what this or that code means, just look at the instruction manual. But what to do in this case is not always written in the manual.
You will need some advice on how to fix the situation.
Decoding, causes and signs
If Bosch CM shows error F59, then the 3D sensor (sensor) is out of order. The first and practically the only sign is that the CMA does not finish the washing program.
When the machine shows error code 59 on the display, a number of reasons may contribute to this:
- An error has occurred in the electronic controller (control board).
- The circuit board has come off.
- The 3D sensor has failed.
- Software error.
Checking and Troubleshooting
The first thing you can do if the Bosch washing machine gives error F 59 on the display is to restart it. To do this, unplug the washer from the mains and let it “rest” for 15-20 minutes. Perhaps you will find a solution to the problem in this.
Repair CM Bosch with error F59
Service center masters know how to fix the failure. To reset errors, they do one of the following:
- Check the 3D sensor wiring. The contacts may have burned out or oxidized, and because of this, F59 is lit on the electronic screen.
- Eliminate the firmware error on the control board. To do this, specialists reprogram the electronic module.
- Check the board cable, its integrity may be broken.
Understanding how to fix the problem is not enough to carry out an independent repair. If it was not possible to remove the error by rebooting, and the code was displayed again, then you need to start serious actions.
An untrained user is unlikely to independently carry out any of the above actions. Therefore, call the wizard to repair faulty components.
The main thing is that you know what F59 means – it remains only to find an experienced specialist and entrust him with the repair of the Bosch washing machine.