Contents
What to do if the toilet is clogged: how and how to clean it yourself
Hard water and salt deposits, food debris, and various debris – all this leads to the formation of a blockage in the toilet. Prophylactic use of household chemicals to clean pipes helps to avoid problems. It is useful to know how to clean the equipment yourself if the toilet is clogged.
What to do if the toilet is clogged
Professional plumbers can dispose of excess garbage. But you will have to wait for them for a long time, it is easier to clean the toilet yourself. A plunger is suitable for this, the rubber blotch of which will be slightly larger than the plumbing drain. The blotch should be pressed as tightly as possible to the edges of the drain hole and push. Progressive movements are repeated several times. Hydraulic pressure breaks through the debris plug.
A clogged toilet can be cleaned with improvised means
But how to clear the blockage without a plunger if the toilet is clogged? In such cases, use a plumbing cable that has a spiral at the end. Its length should be enough to reach the sewer riser. Such a device is effective if a blockage has formed due to rags or napkins getting into the drain.
Insert the cable into the drain hole and push in until the spiral rests against the blockage. The handle of the device should be slightly rotated, and then carefully remove the cable from the toilet. This way, problematic debris can be pulled out, freeing up the drain. If that doesn’t work, the plug is pushed to the riser. After removing the blockage, flush the pipes with plenty of water.
How can you clean the toilet if it is clogged?
If the mechanical action does not work, chemical agents are used. Cleansing gels, powders, or liquids must contain acids and alkalis. With their help, all foreign objects that have led to the clogging of the toilet are dissolved.
Before using household chemicals, carefully read the instructions on the package. It indicates how much of the product needs to be poured into the toilet. After 30-60 minutes. the water is drained to evaluate the results. To remove a strong blockage, the procedure will have to be carried out several times.
Not all household chemicals are suitable for steel pipes. There should be no harm to cast iron or plastic.
If there are no household chemicals for cleaning, improvised components are used: vinegar and baking soda. Scoop all the water out of the toilet, add about 200 g of baking soda and a glass of vinegar (90% is suitable). After 20-30 minutes. everything is filled with 2 liters of hot water.
To avoid clogging the toilet, do not throw garbage and household waste into it. It is advisable to arrange preventive cleaning: this will help to avoid salt deposits.