What do General Electric washing machine error codes mean?

The General Electric washing machine is equipped with wide functionality, the manufacturer has provided a self-diagnosis function. This system allows the washing machine to independently determine the breakdown, after which it shows an error code on the display.

Once the user understands what the code means, they can quickly troubleshoot and try to fix the problem themselves.

General Electric CMA error table: meaning, causes, elimination

Malfunction codeWhat it meansCausesHow to fix a breakdown
IEThe pressure switch is faulty.The system can signal overflow or underfilling of water.How to fix the situation:
  1. Check pressure switch hose for blockage.
  2. Rinse the hose under water pressure.
  3. Check the pressure switch by blowing into the tube. If defective, install a new element.
7EThere were problems in the water intake system.Why does a General Electric washing machine give error 7E:
  • There was a blockage in the filling system (hose, filter mesh, valve).
  • Inlet valve defective.
  • Incorrect connection.
How to fix the error yourself:
  1. Check if the connection is correct.
  2. Inspect the intake hose and valve filter for clogging. Rinse under running water.
  3. Replace inlet valve.
EFault code E is on the CMA display if there are problems with draining the water.Why did the error appear:
  • Blockage of the drain tract (pipe, hose, filter).
  • Drain pump malfunction.
  • Problems with the electronic unit.
To solve the problem:
  1. Inspect and clean the pump filter, pipe from the tank to the pump, hose.
  2. Check and replace the drain pump if it breaks.
  3. Test the main module. Replace if necessary.
dEThe hatch door is not tightly closed.
  • A foreign object has entered the opening of the lock.
  • The door hinges are warped.
  • Removal of latch tongue.
  • Malfunction of electronic blocking (UBL).
To remove the error, do this:
  1. Inspect the lock for debris, clean it.
  2. Check the side hinges. If they are twisted, tighten them up.
  3. Install a new UBL lock.
UEImbalance in SM.The imbalance occurs due to too much load of laundry. Things get knocked to one side, causing the drum to unbalance.What to do in this case:
  1. Open the hatch and manually distribute the laundry evenly.
  2. Remove half of the items from the drum.
OEToo much water in the tank.
  • Inlet valve defective.
  • Broken pressure switch.
To reset the error you need:
  1. Fill valve replacement.
  2. Installation of a working pressure switch.

Based on the listed codes and their meaning, you can start troubleshooting.

Before attempting to repair a General Electric washing machine yourself, always unplug the appliance from the mains.

Leave a Reply