The tablet does not dissolve in the dishwasher – what to do

What to do if the tablet does not dissolve in the dishwasher? You will find the answers in the article.

Of all the means for washing and rinsing dishes, tablets are more often bought. They already include all the necessary components, so they are less hassle and less expensive. But the problem with solubility is often encountered.

Why does the tablet not wash out in the dishwasher?

The dishwasher has a problem if it “spits out”, does not wash out or does not dissolve the tablet. Even if it has not completely dissolved, you should understand the reasons for this phenomenon.

  • Dispenser problem. In modern dishwashers, the compartment is designed for the use of powder, gel, capsules. If the dispenser compartment becomes clogged with detergent or scale, the powder in the compartment will be almost dry.
  • Wet cuvette. Before loading, it is important that your hands and the dispenser cuvette are dry. Otherwise, the agent swells and does not fall out of the hole.
  • Incorrect storage. If the seller did not follow the rules when storing the tablets, moisture could get into the package, they hardened and deteriorated. The same thing can happen at home. Therefore, it is important to store products in a dry and dark place.
  • Outdated PMM model. They do not have a detergent recognition function. It happens that the size of the tablets is not suitable for the cuvette.
  • The dispenser is blocked. Open the chamber door and check the position of the dishes. If some device blocks the dispenser, the compartment does not open and does not take the tablet.
  • Wrong program. Check the set mode in accordance with the PMM operating instructions.

The reason that the dishwasher does not dissolve the powder may be technical problems. If the heater burns out and the water does not reach the desired temperature, then the detergent does not completely disappear or does not dissolve at all.

The same thing happens with insufficient water pressure. Then the inlet filter, sprinkler, filler valve are checked for blockage. The circulation pump is being diagnosed.

How pills work

Manufacturers are increasingly producing All-in-One detergents. The most popular are tablets – powders pressed into briquettes:

  • 3-in-1;
  • 4-in-1;
  • 5-in-1;
  • 6-in-1;
  • 7-in-1;
  • 10-in-1;
  • multifunctional “All in one”.

What are the advantages of briquettes over gels? The fact that they already contain a one-time concentrate of salt, powder and rinse aid. By loading it into the department, you do not have to additionally use other means. That’s what the manufacturer says.

In practice, it turns out that not all All-in-One tools are effective. Most of them require the use of salt and rinse aid, without which stains remain on the dishes.

What stages does a tablet go through before dissolving in dishwashers Bosch, Whirlpool and other brands:

  • dissolving the package (if it does not need to be removed beforehand);
  • dissolving the salt and then the detergent;
  • dissolution of rinse aid.

Having understood the mechanism, we proceed to solve the problem.

We fix PMM breakdowns with our own hands

What to do if salt is petrified or does not dissolve in the dishwasher? The causes of the problems are the same as in the case of the briquette – poor water circulation. Consider how to avoid such problems:

  1. Before turning on the PMM, carefully read the instructions. Our article will be usefulDishwasher for the first time».
  2. Read the instructions for use on the packaging of the detergent.
  3. Clean the cuvette after each use. Let it dry by leaving the door open for a while.
  4. Look at the content and expiration date of the tablets.
  5. Load the dishes correctly into the baskets. Then the powder will not remain in the chamber, and the plates will be perfectly washed.

What to do in case of technical problems? Check dishwasher parts.

Flow filter

The mesh filter is located immediately behind the inlet hose. Shut off the water and disconnect the hose from the PMM body. Take out the mesh. Often it is clogged with rust and debris from the plumbing. Therefore, it is recommended to install an additional filter.

Rinse the mesh under pressure from the tap. If dirt is not removed, soak the part in water with citric acid.

Filling valve

There is a valve behind the filter. In different models, it can be located in the upper and lower parts of the case. If the valve is not clogged, move on.

Sprayer

From the nozzles of the sprayer, water flies under pressure into the chamber. When the nozzles become clogged, the pressure decreases, the quality of the wash deteriorates, and the machine does not throw out the tablet. Open the hopper door for cleaning. There is an atomizer in the tray. Remove it and clean the holes with a toothpick, rinse with water.

Circulation pump

It is the pump that pumps water into the rocker arms. If there are problems with its operation, a complete diagnosis of the unit will be required. In such cases, it is better to contact the master.

Properly take care of the dishwasher, follow the instructions, then you will not encounter such problems. Watch a helpful video:

Leave a Reply