Contents
The first launch of a new washing machine is a responsible event. If you connect the washer incorrectly, the equipment may break.
We will tell you about the first launch and help you make the first inclusion simple and comfortable.
Instruction manual: what is important to know
The first step after buying a washing machine is to read the instructions for it, and not immediately try to start it.
Often the instructions describe the process of installing and starting the washing machine for the first time. Be sure to read the manual in its entirety, including all footnotes – they may contain the most important points.
If you want your washing machine to consume less electricity, follow our tips:
- It is forbidden to overload the machine more than is allowed in the instructions.
- Do not wash items that are not machine washable.
- Make sure that there are no various metal products in the machine – they can ruin clothes and the drum.
Readiness check
So that the first use of the washing machine does not become troublesome, we recommend that you not only read, but also follow these steps:
- On the back of the machine there are transport bolts designed to fix the washer tank during transportation. If the bolts are not twisted, then the machine cannot be used. First you need to unscrew the fasteners, and stick plastic plugs into the remaining holes (supplied with the machine).
- Knowing the hardness of your tap water will be very helpful. So you can clearly understand which washing powder to use for the first run and in what quantity so that the laundry does not remain dirty after washing.
- The equipment must be connected to the water supply and sewerage. If you do not want to call a specialist, do it yourself.
- Check the inlet hose valve. If it is blocked, open it so that water begins to flow into the machine.
If you have a question, is it possible to turn on the washing machine without linen, we will answer – you can. The opinion of experts boils down to the fact that the first wash in the washing machine should be “idle”.
Often, machines are subjected to various tests, so dirt and oil residues may remain in the drum. To prevent them from getting on your things, you must first run an empty machine – this will clean all the internal parts.
When washing for the first time, it is recommended to pour a small amount of detergent into the powder hopper, select the mode with a long cycle and start.
The effectiveness and progressiveness of the first launch depends on how the steps described above are correctly completed. If you miss an important detail, not only will you fail to trigger SMA, but you will also harm it.
Selecting the optimal mode
After you have checked the correct connection of the machine, drove the drum empty, it’s time to move on to the next step – select the washing program.
Modern models of machines differ not only in the number of programs, but also in purpose. Among the more popular features of the machines is the quick wash program and additional functions, for example, the disinfection mode.
When choosing a washing mode, consider temperature indicators that affect the quality of washing. The wrong temperature can ruin the item. You will find what functions and modes your washer provides in the instructions.
Each model has different controls. For example, more budget cars are equipped with an adjusting wheel to select the mode. Expensive models allow you to set the mode by operating the touch panel.
After the preparation for work is completed, you will need to figure out how to start the washer. There should be a “Start” button on the control panel – after pressing it, the machine will start washing.
First wash: important points
An experimental wash is an opportunity to check the machine for leaks. So you can finally make sure that the equipment is properly connected to the water supply and sewerage.
If a leak is detected, the machine must be stopped immediately. Forcefully drain the water, after which be sure to seek help from a specialist. Only after the elimination of all problems the machine can be used again.
If everything is in order, and the test wash went well, you can start washing the laundry. Do not forget to use the instructions and follow all the recommendations indicated in it. You will find information about the maximum load of laundry, and how much detergent to pour into the tray.
In order not to harm things and the machine, you need to know all the important nuances and set the correct parameters.
After loading the laundry and selecting the washing mode, make sure that the door is tightly closed. Now start the washer by pressing the “Start” button.
Important! Make sure the machine is not leaking. If this is not done, the equipment will fail and will be unusable.
Useful Tips for Starting Your Washing Machine
We offer you some useful recommendations that will help you understand the operation of the washing machine after purchasing it:
- When you start the machine for the first time and notice that it rumbles, rattles and makes strange sounds, do not do anything yourself. You are entitled to free repair of equipment in the service center under the warranty card. In such a situation, call the service and explain the problem. The master will come to you and fix the equipment or take it for repair.
- Wipe down your washing machine regularly. Use products that do not contain chlorine.
- Do not forget to remove moisture and dirt residues after washing under the rubber seal.
- Use special products for machine washing. Do not use hand washing powders. This threatens not only with the fact that the dirt is not washed off, but also with a breakdown of the machine.
- Do not overload the machine with laundry, as this will cause parts to wear out quickly due to an imbalance in the drum.
- As often as possible, try to clean the drain filter from various small blockages.
- Before loading items into the drum, be sure to check the pockets for foreign objects.
- After washing is completed, do not close the door – the machine must be ventilated. If ventilation is not done, this will lead to the formation of mold, fungal infections and the appearance of an unpleasant pungent odor.
- Take preventive measures. To remove scale from the heating element, it is recommended to use special products, citric acid, soda or vinegar.
These simple rules will help you cope with any difficulties. Proper operation and regular care of the SM is a guarantee of stable, serviceable and high-quality work. Things will be clean and fresh, and the machine will last a long time.