The best water coolers 2022

Summer heat and thirst are inseparable concepts. In order to satisfy the latter, you need a clean drink and the opportunity to fill your glass with it. The best water coolers in 2022 will help you with this. Read about the most interesting models in our material.

Top 10 rating according to KP

Editor’s Choice

1. Vatten L50REAT (from 9306 rubles)

The technical novelty of the cooler with the bottom loading of the bottle is the cooler made according to the “tea bar” scheme – “tea table”. Water is supplied through a tap installed at the top of the machine. The cooler is equipped with two kettles: for making tea and for boiling water. The kettle for tea leaves has its own bed for heating and maintaining the temperature. In the kettle for boiling, the water starts to heat up after pressing the hot water button twice. Heating is switched off when reaching 100 °С. The built-in display shows the current water temperature. If the water in the kettle is cold, you can turn on the heating with the appropriate button. Cold water is supplied from the same faucet using a special button.

Features: 

2. Aqua Work R71-T (from 15 thousand rubles)

Bottom-loading coolers are becoming more and more popular, despite their cost, and it’s easy to explain – easy bottle replacement, attractive appearance. Here the manufacturer talks about the quality of workmanship and assembly. The control is simple, 3 buttons: for supplying cold, hot and water directly from the distribution tank, with a temperature of 2-3 degrees below room temperature. Heating is also good – at least 4 liters in 1 hour to a temperature of 85-95 degrees. Cooling: 2-3 liters per hour to a temperature of 7-10 degrees (compressor power – 100 W). The hot water button has a protection against accidental pressing, which is convenient if the device will be used by children.

Features: 

3. AEL HC-66L (from 14,5 thousand rubles)

According to the manufacturer, this cooler will perfectly fit into both home interior and office premises. The faucets are made according to the “push mug” type and are marked with soft red and blue colors. The device has a compressor cooling system with a capacity of 550 W, which provides heating of 5 liters of water per hour to a temperature of 90 ° C. Cooling power – 100 W. The performance of the cooling system is 2 l/h (water temperature 9-10°C). The body of the cooler is made of stainless steel with a front plastic insert, HC 66 white+silver is made of white plastic with a silver front insert. The room temperature does not affect the cooling water level.

Features: 

4. HotFrost 35AEN (from 14 thousand rubles)

This model will perfectly fit into the interior of an office or any other space due to its classic color and design. The dispenser is able to provide hot and cold drinking water to a sufficiently large number of people. The water bottle is installed in the lower closed compartment. Therefore, the process of its installation is quite easy and fast. In addition, the appearance of the cooler only benefits from this. The device is equipped with convenient side handles with which you can easily move it to the right place. Push-button control provides comfortable adjustment of all functions of the device. It is very easy to pour water into the cup due to the presence of a special lever at the spout, which is convenient to press with the cup itself.

Features:

5. Smixx 16LD/E (from 4990 rubles)

This cooler can provide a proper drinking regime for your office or home. So, it can heat water up to 90 degrees and cool up to 15. Thanks to the heating power of 550 W, it is distinguished by a capacity of 5 liters per hour. And the cooling rate is 1 liter per hour. The hot water tank has a capacity of one and a half liters, for cold water – 0.8 liters. The mug push faucet is very convenient to use. Stylish, compact Smixx 16 LD/E does not take up much space and will organically fit into the interior of the room.

Features: 

6. Ecocenter G-F4EC (from 5841 rubles)

From the manufacturer’s description it follows that this cooler for bottling drinking water is inexpensive and durable. It also features an interesting design and modern color scheme. They make this cooler model attractive enough for many buyers. The device has a push-button way of pouring water, light indication of heating and cooling operation, as well as a convenient cabinet at the bottom of the equipment.

Features:

7.ABC V170 (from 5500 rubles)

Floor cooler with heating and compressor cooling of water, similar to that used in refrigerators. With a high cooling capacity of up to 2 l/h, these coolers are designed for increased usage. Compressor models cool water to a temperature of 10 degrees. The hot water button has a protection against accidental pressing. The heating capacity of this model is more than 4 l/h. Before switching on, be sure to read the instructions. It is strictly forbidden to turn it on without water.

Features:

8. RENOVA DC-F1C (from 6524 rubles)

An interesting model with a compressor type of cooling, which is a priority for many. The cooler has a good heating performance – 5 l/h. Cooling capacity – 2 l / h. A plus in this device is the excellent volume of the locker – 16 liters. The bottle is placed on top. The cooler can be purchased in different color variations.

Features: 

9. Aqua Work 720 T (from 2599 rubles)

The Aqua Work 720-T desktop water cooler with heating but without a cooling system is an excellent replacement for an electric kettle for bottled water at home and at work. There is a high-quality case made of durable white plastic with rounded lines. A 500 W heating tank provides 5 liters of hot water per hour with a temperature of at least 90-93 degrees. Water at room temperature will come from the second, “blue” faucet. The use of glass holders in this model is not provided by the manufacturer. The dispenser is useful for everyone who does not need to cool drinking water from a 19-liter bottle installed on top.

Features: 

10. HIBERG UFK-653B (from 13 thousand rubles)

Excellent cooler with compressor cooling. It should become your indispensable assistant. The model is made of quality materials. The bottle is installed from below. The heating performance is decent – 5 l / h. Cooling – 2 l / h. The cooler will require a little space, so take care of it in your office or home in advance.

Features: 

How to choose a water cooler

The range of such goods, as we have seen, is large. But there is no need to rush to the first one that comes across. How to choose a water cooler, Healthy Food Near Me was told by a specialist in the sale of household appliances Roman Komarov. He offers to choose according to the characteristics.

Water cooling type

There are two types – electronic and compressor. The first type of cooling is used more often and is more suitable for desktop coolers. These models tend to be smaller and more environmentally friendly. Be sure to ventilate the room so that dust and dirt do not get into the cooler. Models with compressor cooling resemble those used in refrigerators. They cool the water more, but are more fragile. Do not harm the structure, otherwise you will allow a refrigerant leak. It is advisable to transport such coolers only in an upright position. Some coolers do not have a cooling system at all. They serve hot water and water at room temperature. Such devices are cheaper.

type of instalation

There are also two of them. Floor coolers are more popular. They are suitable for a large family or for the office. True, take care to allocate space to the device. For example, in the kitchen. Some models have a cabinet for dishes and a refrigerator. Desktop coolers are placed on a table or on special stands. They are optimal for low water consumption. Not suitable for a large company.

Water supply

Coolers with a top supply of water from a bottle are the most budgetary. A container of water is placed upside down on top. At the end of the water, the bottle must be changed. It takes man power. Bottom feed models are more expensive, but more convenient. You simply install the bottle in a special compartment and close it with a door so that it does not catch your eye. Water supply is carried out using a pump or a hand pump. There are coolers with flowing water supply. They process tap water into drinking water using a multi-stage filtration system. The devices are expensive and need to be replaced filters.

Control method

Coolers with a mechanical system are easy to use. To pump water, you need to press the pump. The child may not be able to. In electronic models, you can set the temperature or a timer, some have indicator panels where you can carry out various actions with water. Such coolers are more expensive, but more functional.

Water taps

There are models with glass pressure. You need to bring a mug to the tap and press the lever located in the frame. If you move the glass away, the water will stop flowing. This is a very simple and convenient way. But it is designed for small volumes. To fill a large container, the lever will have to be held for a long time. In other models, you can adjust the water supply with buttons on the case.

Additional functions

They will be a nice bonus for the buyer. Carbonation, filtration, ozonation of water. Yes, the filters will have to be changed, but with them the water is cleaner. Some models have protection against children – this is also an important point, in particular for families with children. The presence of a cupboard for dishes and a refrigerator compartment can also be a plus.