The best models of Kuppersbusch washing machines: premium quality from 150 rubles

Kuppersbusch washing machines are the brainchild of the German company of the same name, the basic principle of which is:the main thing is in the details“. Whether this is so and what details you should pay attention to when choosing, you will learn from this review. But keep in mind that not everyone can afford the technique – the cheapest SMA of this brand costs at least 150 rubles. For that kind of money, you will get not only the notorious German quality, but also the latest developments implemented in cars by talented engineers.

Where is CMA “Cuppersbush” produced?

Like many sensational firms, the company began its work in the XNUMXth century with the production of coal plates. By honing labor productivity, the management managed to achieve a minimum percentage of defects in production – and this is a very important fact, because most of all the buyer is afraid to pay a tidy sum for equipment that may suddenly break down.

The manufacturer does not hide information about the place of assembly of its products, on the contrary, it focuses on this, because “Made in Germany” sounds solid! So it is – behind the brand “Kuppersbusch” stands German appliances, assembled in the vastness of Germany – a country in which they make, perhaps, the best, but also the most expensive household appliances in the world. Some online stores indicate that certain models are assembled in Switzerland, which also does not upset the buyer. There is information that this is a SMA from Schulthess, only under a different logo. There is an opinion that it was in Schulthess that they invented the first automatic washing machine, and their SMAs have been produced since 1845!

Take a look at this retro photo of the famous factory – more than a century ago, the brand commanded respect and made excellent devices.

The device and features of Kuppersbusch washing machines

Let’s figure out how the washing machine works, which costs almost a quarter of a million rubles. You will find in it such advanced technological solutions and reliability indicators:

  • As a representative of premium-class professional equipment, each machine of the German brand is equipped with special soundproofing system, which guarantees quiet washing and spinning.
  • Touch sensors, which the designers did not stint on, weigh the laundry, “understand” how dirty it is, and, based on the data obtained, select the washing parameters.

On a note! Do you want a cheap analogue of smart SMA? Look for options from Whirlpool with 6 Sense technology – it will do the job just as well, but it will cost 5 times cheaper.

  • Display needed not only for traditional tasks – viewing the remaining time and information about the program. The screen also displays electronic dictionary, which will tell you how to remove certain stains or care for different types of fabric using your machine.
  • Self-cleaning of the drum will appeal to those who do not want to wipe it every time after washing. The equipment will wash off the remains of detergents itself, and you will be informed about it on the display.
  • Aqua-Sensor – this fashionable little thing monitors the purity of the water in the drum, wetting the laundry as necessary. Not a single drop of water will be wasted: if the sensor determines that the water is no longer cloudy, then things have been rinsed well and the cycle can be completed. If the sensor detects cloudy water, it will add an additional rinse cycle itself.

Washing and spinning: how does it work in CMA “Cuppersbush”?

The main purpose of the washer is to make things clean and practically dry, so the first thing you should pay attention to when choosing how well the equipment will cope with these tasks. It’s not enough to learn about the washing and spinning class – it doesn’t hurt to ask in advance what your future potential purchase can do. To do this, we create such reviews, collecting all the important material about the device in one place.

Features of washing and spinning:

  • The new generation models have 3D-Washing function. Its essence is to ensure the movement of the drum in three-dimensional space, so things are better washed.
  • The pedantic Germans have such a program as “Tick ​​protection“. No, linen is not treated with repellents – just things are washed at 60 degrees, and then thoroughly rinsed in a large volume of water.

Hm! How it protects against ticks is not easy to explain, so, just in case, do not rely on the program and wear socks and closed shoes when going for a walk!

  • The user is free adjust any wash settingsbased on the degree of soiling of clothing. If the child has been playing football all day, and then also poured a tube of paint on himself, add the “Soak” or “Extra Rinse” option. And if the party ended with a greasy stain from a steak and a trace of red wine, use the “biophase” cycle. You can also set the washing temperature, reduce the spin speed, select the amount of water for a partial load, and so on.

On a note! The “bio” function involves the removal of organic stains – from food, blood, and so on.

  • Allergy sufferers and children will be protected with “Antiallergy” mode – on this cycle, things are washed in very hot water and rinsed well. In combination with special detergents for washing, this is a guarantee of complete disinfection of linen and things.
  • An expensive machine is unlikely to wring out badly, so all models are class A in this matter. Only if LG or Samsung “press” with class A at 1200-1400 rpm, “Cuppersbush” does it at 1500–1600 rpm, depending on the model.
  • Special Modes, which cannot be found among competitors: “Impregnation”, “Cotton 3D-Powerclean”, “Curtains” and others.

What do the experts say? In general, the assembly of these machines is so high-quality that the employees of the service centers assure that the Kuppersbush repair is a rarity, and if applications do occur, it is solely due to the wear of parts. It is not the Germans who are to blame for this, but our hard water in the tap and long-term operation. It still depends on how to use the equipment – with careful care and compliance with the operating rules, there should be no precedents.

Top models: characteristics, user reviews

There are not so many models in the Kuppersbush assortment presented on the Russian market, and you can’t buy the CMA you like in every store, but there are still plenty to choose from. All models are characterized by a large load, an impressive hatch diameter, a stainless steel tank and the highest energy class.

Important! What is the difference between a plastic and stainless steel tank? The downside is that such tanks are not disassembled, but an indisputable plus follows from this – they are more airtight and reliable.

Also note that Kuppersbusch machines do not have a dryer.

WA 1940.0 AT – in a silver case

A very powerful option with the following parameters:

  • Drum volume: up to 8 kg.
  • Control type: touch.
  • Dimensions (WxDxH): 60x64x85 cm.
  • Washing / spinning / energy classes: A / A / A +++.
  • Water consumption for 1 wash: 45 liters.
  • Spin speed: 1600 rpm.
  • Spin options: speed selection, cancel.
  • Protection: full protection against leaks, against children, against imbalance and excessive foaming.
  • Programs: 22 pieces, including Wool, Silk, Direct injection, Easy care, Quick 15 minutes, Jeans, Blouses, Impregnation, Curtains and others. There are 6 personal programs.
  • Delayed start: yes, up to 7 days.
  • Hatch parameters: diameter 34 cm, opens 180 degrees, re-hanging. Double glass.
  • Noise wash / spin: 45/70 dB.
  • Warranty period: 1 year.

Advantages:

  • Equipped with a dust- and moisture-resistant display, diagonal 4,3”.
  • Drum LED lighting.
  • The volume of the program end signal can be adjusted.
  • Innovative 3D drum with 6 grippers of different hardness for gentle washing.
  • The sunroof opens automatically after the end of the program.

Cons:

  • It is difficult to find other disadvantages, except for the cost.

WA 1920.0 W – classic snow white version

To be honest, there are only two differences from the previous model:

  1. Made in white case.
  2. Spin 100 revolutions less – up to 1500.

All other parameters are identical at first glance. Did the manufacturers throw off almost 80 rubles for a less high-speed spin? It remains only to guess.

But there are a lot of user reviews for this model on the network – so meaningful that there is no doubt about their plausibility. So, buyers rated:

  • Build quality and wash quality. It is noted that a good wash also depends on the detergent.
  • Quote: “As for this machine, I can say for sure, there is something to compare with, in the Miele country house … kuppersbusch is out of competition in terms of washing quality, noise, and the rest too. Take the same plastic … much nicer. Looks very good too».

Expert comment: Forgive us, users who are looking for a typewriter no more than 20–000 rubles. And we are sincerely happy for the person who has Miele in his dacha and Kuppersbusch at home, which is at least half a million rubles. There is something to strive for, gentlemen!

  • It rinses out the powder very well.
  • Observant users have found that this cheaper model does not have an auto-weighing feature, and report that many online retailers “attribute” non-existent capabilities to the machine. In this case, the difference in price is quite logical.

In the range you will also find the following models:

  • WA 1935.0 W – with spin up to 1600 rpm and cost from 207 rubles.
  • WA 1930.0 W – with the same parameters as the previous one.
  • W 1809.0 AT – silver CMA for 7 kg, spin up to 1800 rpm! The energy class is A +, and it consumes 49 liters of water per cycle. At the same time, it costs about 230 rubles.

Conclusions and comments

Let’s summarize our “investigation” about the Kuppersbush machines:

  1. Assembly takes place in Germany and Switzerland.
  2. The price range is 150–000 rubles.
  3. Lots of really useful features, a large set of programs.
  4. Positive user feedback.
  5. Small assortment.

Should you buy or not? Only you make this decision, and we will only say that expensive equipment is good, but it is not immune from breakdowns in the harsh realities of hard water and power surges. Even if you install a voltage stabilizer and put a filter on the incoming water, you cannot be 100% sure that the equipment will work for several decades. But it has the potential for flawless and long-term work. Share your opinion, and maybe your experience of buying in the comments.

Leave a Reply