Contents
- Top 10 rating according to KP
- Editor’s Choice
- What other laser levels are worth paying attention to?
- How to choose a laser level
A laser level is often called a “level” in the common people, because this device provides good marking accuracy. The operation of such a tool is based on the use of one or more laser beams passing through a certain focusing or scanning system (depending on the type of construction), showing a point, a straight strip or a plane (one, two or three) at the output. Such levels are convenient in work because they help to quickly and accurately apply markings and take measurements.
Laser levels facilitate the work of specialists who carry out repair and finishing work. Undoubtedly, such a laser will also be useful for small homework, improve their quality, reduce the time of their implementation. Construction or repair work, floor screed, interior decoration, stretch ceiling installation – and this is not a complete list of tasks for using this level.
Top 10 rating according to KP
Editor’s Choice
1. ADA instruments PROLiner 4V (from 12 thousand rubles)
The ADA PROLiner 4V laser level is used in construction and repair work: leveling ceramic tiles or other coatings during installation, wallpapering, installing borders. The level projects a bright line 140º horizontally. With regard to vertical marking, there are four vertical laser lines that turn on in turn. A plumb line will allow you to accurately set the level to the desired point. The error is no more than 0.2 mm.
It has a very strong rubberized body protection, stiffeners, and dust and moisture protection elements provide high-quality protection for the device. The level is not afraid of shock, dust and moisture. A rotary part is installed at the base of the case for soft and precise guidance of vertical lines. The control knob rotates the instrument 360° left and right around its axis. Simple pointing to a given point. Level, mounted on a tripod or wall mount using a 5/8″ threaded connection on the base. For storage and transportation of ADA PROLiner 4V the set includes a durable case.
Advantages and disadvantages
2. Condtrol Neo X1-360 (from 5655 rubles)
The CONDTROL NEO X1-360 1-2-127 level displays a 360 degree laser line, both horizontally and vertically. Convenience in solving various construction and finishing tasks is provided by the mode of inclined planes. The case is made of impact-resistant plastic, coated with a rubber damper. Can be mounted on a tripod with 1/4″ or 5/8″ thread. Due to its powerful body, the level is sufficiently resistant to mechanical damage. The loop on the case is made for easy fastening to a regular self-tapping screw.
Advantages and disadvantages
3. DEKO DKLL12 (from 3148 rubles)
The DEKO DKLL12PR3 laser level is a self-adjusting tool. Like other levels, sharpened for finishing and construction activities. Comes with a standard plastic case. Creates both vertical and horizontal lines. In the case of bright light, the kit includes laser glasses in which the beam will be visible. This fixture can project up to 12 lines in 3D. Three windows, each producing four laser lines. Measurement range up to 30 meters. Alignment occurs automatically. Powered by a lithium battery with a capacity of 3000 mAh.
Advantages and disadvantages
What other laser levels are worth paying attention to?
4. BOSCH GCL 2-15 G + RM 1 (from 11,4 thousand rubles)
The Bosch GCL 2-15+RM1 laser level is powered by three AA batteries and they provide sufficient autonomy. In the operating mode, the device can work up to six hours. The level supports placement on a tripod. A quarter and 5/8 inch thread is used to secure the equipment. The device displays four laser beams, for a maximum range of 15 meters. According to the manufacturer, the level is designed to work from -10 to +50 ° C, has IP54 protection against moisture and dust. The tool is characterized by good reliability, unpretentious and can function in a variety of conditions. The error is ± 0.3 mm/m. The level gives high marking accuracy. The device is distinguished by its compact size and weight of 300 grams, it is very comfortable to carry it.
Advantages and disadvantages
5. Tesla L-360×1 (from 9 rubles)
TESLA L-360×1 is a level with a wide viewing radius: 360° horizontally, 150° vertically. Effective working range up to 20 m. Pendulum compensator eliminates installation unevenness. The error is 0,3 mm/m. If the slope is more than 4°, then the level does not compensate for it, but gives a signal by blinking the beams. There is a compensator blocking function for displaying oblique lines. The control is carried out by a button and a switch. The top button turns on and selects the projection mode. The switch on the side locks and unlocks the compensator. The device runs on AA batteries.
Advantages and disadvantages
6. RGK UL-360 (from 8000 rubles)
The RGK UL-360 laser level is compact in size and easy to use. It projects in two lines – in the horizon at 360°, in the vertical at an angle of 240°. Lines can be displayed either separately or simultaneously. The main feature is the low level projection of a circular horizontal plane over the mounting platform by 360°. The maximum display range of the laser beam is 40 meters without using a laser receiver and 70 meters with a receiver. Projection accuracy ±0,2 mm/m. Auto compensation corrects deviation within ±4°. If the range is exceeded, the level emits an audible signal. Can be mounted on a tripod: for this, the level has a quarter-inch screw in the body.
Advantages and disadvantages
7. ELITECH LN 360/2 (from 7300 rubles)
The ELITECH LN 360/2 laser level has two laser emitters. It will be effective in labor activities related to measuring work. In the case of using the receiver, the projection range is increased to 80 meters, visibility is increased in bright light. The sweep angle of the horizontal line is 360°. If the tilt angle exceeds ±4°, the laser beams are switched off. Green laser. The case has a rubberized surface, is reliable. Due to its compactness and ease of use, the level is extremely simple – the tool does not tire the hands and does not cause any discomfort. Self-leveling time does not exceed 3 seconds.
Advantages and disadvantages
8. Denzel LX3 (from 3893 rubles)
Level DENZEL LX3 35070 projects 4 vertical and 1 horizontal lines. It is mainly used for marking rooms. It has a mode of increased beam brightness. High-quality laser diodes give high-quality line visibility. Can be mounted on a tripod. This will allow you to use the level at different heights. If the inclination angle is exceeded, causing the leveling range to be exceeded, the laser beams are switched off. Intuitive controls. As stated in the name, the level has a self-leveling function, which allows you to reduce the time of work and increase the accuracy of markings.
Advantages and disadvantages
9. INSTRUMAX Constructor 4D (from 5000 rubles)
Точный линейный лазерный нивелир. Может исполнять возложенные на него задачи как в помещении, так и на улице. Уровень проецирует четыре вертикальные линии (4V), 1 горизонтальную (Н), точку отвеса (D). В дополнении к этому, на пересечении вертикальной и горизонтальной линии и на вертикали чуть выше, отмечены лазерные точки. Наличие отвеса дает большую точность при установке прибора на требуемую точку. Эффективная дальность равна 20 м.
The compensator has a special lock to protect against damage during transportation. If the inclination angle is exceeded ±3° and consequently goes out of the alignment range, the laser beam flashes and emits a warning tone. The device is powered by the included charger. If the battery charge is at zero or the batteries are dead, you can connect the level to the household electrical outlet through the charger and continue working. For storage and transportation of the laser level and accessories, the entire set is placed in a transport case.
Advantages and disadvantages
10. Kapro Mini Cross Line Laser (from 4799 rubles)
The KAPRO 862 laser level is ideal for leveling floor and wall tiles, hanging shelves and pictures, installing doors and windows. The built-in magnet allows you to mount the level on any metal surface. Also, this model can work in marker mode with a locked pendulum. The projected lines are vertical and horizontal.
Advantages and disadvantages
How to choose a laser level
The rating of the best levels will definitely be useful when choosing such a tool. And now a civil engineer Alexander Shagarov, will share his experience in choosing laser levels.
The nature of the work ahead
Any tool is needed to solve a certain set of tasks. Therefore, it is important to consider the nature of the work that is in front of you. For example, it is completely inappropriate to buy a professional level, with a large set of functions, to hang a shelf at home. At the same time, a medium category level is required for floor screeding. The specifics of the upcoming work is one of the most important criteria that directly determine the required technical characteristics of the level (and any tool) and the need for its functions. Sometimes, it is easier to purchase a level that is quite inexpensive in price, but which will fully fulfill the goals assigned to it.
The number of rays and their direction
The functionality of the level depends on the number of beams. If you need a multifunctional level, then it is better to choose a level with 5-7 beams. The direction of these rays should be both horizontally and vertically. With a small amount of work, it is more practical to take a tool with one beam, for example, horizontal. Of course, the more lines displayed, the sooner the battery will run out. For this reason, the function of turning on a specific beam is very useful.
Allowable error
The higher the error, the worse the quality of measurements. And vice versa. As a rule, household appliances do not have very high accuracy, about 0,5 – 1,5 mm. As for professional levels, of course they are more accurate, and their error does not exceed 0,5 mm.
Measurement range
This is the maximum distance at which the beam will be visible. Indoors, a range of 10 – 15 m is quite suitable. As for the street, devices with a measurement range of 20 m are appropriate here.
Type of food
Laser levels come with a rechargeable battery or with batteries. In a professional environment, the first option is more valuable, as it is more reliable and lasts longer. For work at home, battery-powered options for levels will fit. In this case, I advise you to always have a spare set for this level.