The best gas convectors 2022

Heating private houses with gas is a common occurrence these days, and this is not surprising: it is cheaper than heating with electricity. In many country and cottage settlements there are gas mains, and if there is no main, and its construction is not foreseen, then autonomous gas tanks are at your service.

The gas convector (catalytic gas heater) has the following principle of operation: the air flow passing through the device is heated by the products of gas combustion (the products of combustion must be removed from the room). Convectors operate either on natural gas (from main gas pipelines) or on liquefied gas (propane-butane in cylinders or gas tanks).

Convectors are used for heating any premises, both residential and auxiliary. That is why, when choosing a convector, it is important to understand for what purposes it is purchased. According to the type of installation, gas convectors are wall-mounted and floor-mounted, below we will consider devices with both mounting options. There are not many manufacturers of this equipment, so some companies will be presented in the rating more than once.

Top 10 rating according to KP

Editor’s Choice

1.Hosseven HHS-9V 9 kW (average cost ≈ 33000 rubles)

The first in the top three is the HHS-9V floor convector from the Turkish company Hosseven. It has a high heating power – 9 kW, which enables it to effectively heat the air in spacious rooms. This is probably the most productive unit in this price category. It works both on liquefied gas from a cylinder or gas tank, and natural gas from the main. For greater efficiency, the device is equipped with a fan and an automatic temperature control function.

Key Features:

2. Karma BETA 5 Mechanic 4.7 kW (average cost ≈ 35000 rubles)

Wall convector with a very high declared performance from the Czech company Karma. The manufacturer talks about the possibility of heating a room of 100 square meters. m. with a power of 4.7 kW. However, real tests confirming this statement could not be found. Nevertheless, there is a very high efficiency of this model – about 92%. The combustion chamber is closed, the ignition is piezocrystalline. It is possible to automatically maintain the temperature in the range from 13 ° C to 38 ° C. The heater works both on natural gas, and on liquefied.

Key Features:

3. Hosseven HP-8 6.2 kW (average cost ≈ 41000 rubles)

The “designer” convector with a wall mount closes the top three. The power is very high – 6.2 kW, which is suitable for almost all residential premises, and an attractive appearance will help to fit the device into the design of the room. The combustion chamber is closed, the heater is also equipped with a thermostat and automatically maintains the temperature in the room in the range from 13 °C to 35 °C.

Key Features:

What other gas convectors are worth paying attention to

4. Alpine Air NGS-50F 4.9 kW (average cost ≈ 31000 rubles)

Wall convector Turkish manufacturer Alpine Air NGS-50 with a declared power of 4.9 kW. It is designed to operate on both LPG and natural gas. The combustion chamber is internal, the heat exchanger is made of cast iron, which has a positive effect on maintaining the temperature. The device is equipped with a continuously adjustable thermostat. The ignition is electric, but no mains connection is required – an AA battery is needed. How convenient it is is up to you. Electronic control. The model is equipped with a fan to enhance convection, but if you do not need it, consider the Alpine Air NGS-50 model.

Key Features:

5. Alpine Air NGS-30F 3 kW (average cost ≈ 24000 rubles)

Compact, but quite powerful convector Alpine Air NGS-30F 3 kW with a fan. The device can be connected both to the main line and to autonomous gas sources, and the fan will allow more efficient distribution of heat. Electric ignition is battery operated, which in some cases can be very inconvenient. Electronic control for a number of users will be a definite plus. There is also a fanless option: the Alpine Air NGS-30 model.

Key Features:

6. Hosseven HDU-3V Fan 2.7 kW (average cost ≈ 25000 rubles)

Convector for wall installation with internal combustion chamber. Works on both natural and liquefied gas. The electronic control will appeal to some users, and the claimed auto temperature range is 13°C to 35°C. The thermostat has seven adjustment levels. The undoubted advantage is that the device has a built-in fan for more active cold air supply and hot air distribution.

Key Features:

7. Karma GAMAT WR 20 2 kW (average cost ≈ 29000 rubles)

Another compact wall convector Karma GAMAT WR 20 2 kW. A distinctive feature is the vertical design, which is suitable in cases where there is little space in the room. The device has an automatic temperature maintenance function from 13 °C to 35 °C.

Key Features:

8. FEG Konvektor GF30P 3.3 kW (average cost ≈ 37000 rubles)

The device from the Hungarian manufacturer FEG Konvektor GF30P has a power of 3.3 kW and is designed for wall mounting. The combustion chamber is closed and made of cast iron. The device can automatically maintain the temperature in the range from 13 ° C to 38 ° C. Vertical design is suitable for small spaces.

Key Features:

9. Gorenje MORA 6150.1022 2.5 kW (average cost ≈ 18000 rubles)

Inexpensive and functional unit from the Czech company Gorenje. If you do not need anything extra, and you do not want to overpay, then this is your choice. The device is equipped with a thermostat (from 10 °C to 32 °C), can operate on both natural and liquefied gas, and most importantly, its dimensions allow it to be installed under the windowsill.

Key Features:

10. ATON Vektor 2,2 kW (AOGC) (average cost ≈ 13000 rubles)

Probably the most inexpensive option on today’s market is a convector from the Ukrainian company ATON. The set of functions is standard, the device works both from the main line and from the cylinder. Particularly pleased with the presence of a thermostat with automatic maintenance of the set temperature. The low price is very attractive, but it should be remembered that this brand is not common in our country, so consumers do not have much experience in using it.

Key Features:

How to choose a gas convector

Despite the fact that there are not many manufacturers of gas convectors, and the range itself is not very large, it can be difficult to make a choice. ” Healthy Food Near Me” asked an expert to help understand the intricacies of choosing a gas convector.

Pros and cons

To begin with, consider the main advantages and disadvantages of gas convectors as a class of heating appliances. As advantages, one can unequivocally name high autonomy in operation, relatively compact dimensions (unlike gas boilers), and low complexity of installation. However, the convector can only heat one room, and you will need to buy a separate unit for each room. In addition, the combustion products of the gas must be removed. This means that you will definitely need to draw a conclusion from each device either to the street or to the chimney. Suppose that you have weighed all the pros and cons, and decided that this is the type of heating that your home needs. In this case, you need to remember a number of parameters.

Mounting method

There are three types of convectors depending on the mounting method: floor, wall and mobile. There are many devices that can be installed and hung, mobile gas convectors are now very rare, since their use is difficult due to the need for constant removal of gas combustion products.

Type of fuel consumed

Gas convectors work either from the main (natural) gas, or from a liquefied mixture of propane and butane. Liquefied gas is pumped into autonomous gas tanks and cylinders. Now most devices are adapted to work with these two types of gas, and the appropriate adapters are included with the devices. When installing a gas tank, it is necessary to carefully calculate the expected volume of gas consumption, and this should be done by a specialist. Cylinders for space heating are of little use because of their volume.

Combustion chamber type

Convectors are equipped with either open combustion chambers (chimney convectors) or closed ones (parapet convectors). As the name of the first type implies, a chimney is required for the operation of these devices. Oxygen is taken from the surrounding air. Such devices are more powerful, but their efficiency is slightly lower than that of parapet ones. Moreover, their installation is a very difficult undertaking. Convectors with closed combustion chambers are more efficient and easier to install. With the help of a special pipe (coaxial), combustion products are removed to the street, and oxygen is taken. However, it must be remembered that each hole in the wall is a violation of heat and sound insulation, no matter how well you seal it up. In everyday life, the second type is almost ubiquitous.

Heat exchanger material

The heat exchanger is a very important part in a convector. For its manufacture, steel, cast iron or copper are used. Cast iron is more durable, heats up slowly, but most importantly, it cools slowly, therefore, it retains heat better, and usually the efficiency of devices with cast iron heat exchangers is higher. Copper has a very good thermal conductivity and retains heat well, but is more expensive than steel or cast iron, so it is rare.

Power, temperature and heating area

Manufacturers almost always indicate the heating power in kilowatts. Some even indicate the heating area. However, this information should not be taken at face value. If the manufacturer does not indicate the heating area, then it can be conditionally calculated according to the model: one kilowatt per 10 square meters of the room. Therefore, a device with a power of 2,5 kW can be designed for 25 square meters. m., with a power of 6 kW – for 60 sq. m., etc.

In fact, everything is much more complicated. Effective heating of a particular area, of course, depends on the power of the heater. But no less, and even more influence is exerted by the properties of a particular room. In particular, its volume (manufacturers talk about the area, not the volume!), The quality of the walls, joints and doors; the presence or absence of furniture and other items in the room. Temperature plays a huge role. Obviously, at 0 °C the result will be one, and at -25 °C it will be completely different.

A similar approach is also valid for the temperature regimes declared by the manufacturer. It is better that any appliance in your home always has a margin of power and performance.

General remarks

The gas convector must only be installed by a specialist. Even if you are good at installing water pipes, drilling walls and assembling furniture, this does not mean that you are able to properly connect gas equipment. Gas is one of the safest ways of heating, but on condition that all work is done correctly.