Contents
It is not always clear to the user what the tE error that appears on the screen means. Before giving an error, the washer starts up normally, starts washing, but in the process it “freezes” and writes the code. This indicates a heating problem.
Any malfunctions in the LG washing machine are indicated by a fault code on the display. Models of washing machines without a screen notify about the problem by glowing (blinking) of all temperature indicators.
How to decipher the error
Please note that in some models of LG cars, the error code tE is similar to FE. The user may mistake the small “t” for an inverted “F”. There is nothing wrong with this, but you must understand what the fault code means, so it is important to read it correctly.
The meaning of the error tE for the LG washing machine sounds like this: an error or malfunction with the heating circuit.
A characteristic symptom of a malfunction is that the SM does not heat the water. If you touch the hatch glass during operation, you will feel its coldness.
It is important to know! When the system shows the tE error on the display and you urgently need to wash, set the wash program in cold water. As a rule, all other modes, except for heating water, work properly.
However, this does not mean that you can let things go by themselves. You will learn how you can fix the error and fix the breakdown without leaving your home.
Help with your own hands
What measures to take to reset the error:
- Reboot. There is a failure in the control board, to eliminate which you need to disconnect the washer from the network. Wait 10-20 minutes, then turn it on again. If the code no longer lights up, everything is in order.
- Examination. The error code tE in LG CMA may be displayed due to a violation of the connections between the heating element and the control module. You need to check the wiring, connectors connections. If the contacts have come loose, tighten them back.
What should I do if the error cannot be cleared? It is necessary to inspect the parts of the LG washing machine (LG), the malfunction of which may be indicated by certain signs.
Repair at home
Solving the problem yourself is not always possible, but worth a try.
Breakdown of heating element
What are the symptoms that indicate a heater problem?
- The machine washes in cold water, stops in the middle of the program.
- The display shows the code tE.
In this case, 80% of breakdowns fall on the tubular electric heater (TEN), it is he who is responsible for heating the water. Only the installation of a new, serviceable element will help.
Control box problems
The washing machine worked as usual, but after the start of work it stopped and gave an error tE. Since the module is responsible for all processes in the SMA, if it breaks down, the parts do not receive a signal to act and work. Therefore, you need to get the control unit, inspect the board for damage.
If you are sure that you can repair the board, proceed. If the module is defective, the element must be replaced.
Thermal sensor (thermistor) malfunction
The temperature sensor is responsible for measuring the water temperature. Therefore, if it malfunctions, the water in the LG machine does not heat up, the system slows down washing and gives an error tE.
How to replace:
Dry sensor problems
The dryer sensor monitors the temperature while the clothes are drying. Therefore, an error code can be displayed both at the washing stage and during drying (if this program is provided in the washing machine). In this case, the work of the SM is interrupted.
What you can do:
- Disconnect the LG washer, remove the top cover and the bracket under it.
- Disconnect the door cuff and connectors on the heating chamber.
- After unscrewing the bolts, open the heating chamber.
- You will immediately see the sensor. Remove it and install a new part.
Watching the video will help in replacing:
So, you can repair the LG washing machine with your own hands and return it to normal operation.