Contents
Watering is one of the most important agricultural practices that affects the appearance and yield of plants in the garden. There are several effective methods of garden watering, from a banal watering can to automated watering systems that are controlled using a PC. The competent organization of watering in your garden can be called an art, as each plant needs special care. One needs a large amount of moisture, and some simply manage with a minimum amount of it. The gardener also needs to realistically assess his strength, as well as take into account such important factors as the proximity of the garden to water bodies or wells, the type of soil, and the location of the garden. When planning irrigation, it will also be useful to think through the consumption of water and electricity.
What’s this
Atomizers are devices that are used in horticulture to divide the flow of water into small drops, resulting in much better watering of plants. Atomizers use the movement of fluid under the influence of various pressures. Most often in agriculture, sprayers are called sprayers. This is a piece of equipment for watering plants or soil with water, fertilizer solutions, pesticides and other liquids. After the use of sprayers in plants, the provision of roots with moisture and the necessary nutrients improves, the temperature of their surface layer decreases and the humidity increases.
Scope and features of operation
Today, in horticulture, important factors are feeding, protecting and caring for plants. Of course, the main goal in this business is to obtain high results. But do not forget about such an important aspect as saving the resources expended. That is why it is worth using only high-quality sprayers for the garden. Sprayers are used both in small garden plots and in vast areas. They are used not only for watering plants in agriculture, but also in sports fields or stadiums for watering the lawn.
Video “Plastic bottle sprayer”
How to make a garden spray with your own hands from a plastic bottle.
Varieties
A garden sprinkler is a device that affects the quality of spraying. It is not recommended to save on a high-quality sprinkler. There are two main types of atomizers – slotted and injector. The second type is more modern.
Despite the fact that slotted sprinklers are much cheaper, experts still recommend purchasing injection ones. They are used more often, and they are more efficient and provide high-quality watering of plants.
In other words, if you are in the mood for the best result, use this type of sprinkler. Slitted ones are more suitable as a fallback option that will work perfectly under ideal weather conditions for spraying, at temperatures below 25 ° C, low wind speeds and relative humidity above 60. Experienced farmers recommend not watering plants with excessively cold water from a water supply or artesian well . This is very important for good crop growth. Therefore, you will probably need barrels or other large containers for water. There are quite effective ways to organize high-quality irrigation. The most commonly used sprayers. It is quite possible to make this device with your own hands.
How to make yourself
Do-it-yourself garden sprayers are quite simple to make, and in terms of the quality of the work performed, they differ little, and sometimes even surpass the factory models. The most commonly used deflector nozzles with nozzles in the form of cones. In such devices, the jet pours out of the hole under pressure, ends up on the deflector, then breaks against it, is evenly directed in the form of drops and distributed over the irrigation area.
One of the most uncomplicated do-it-yourself sprinklers for watering is a fixture made from ordinary plastic bottles. To do this, you will need bottles of 2-2,5 liters. It is recommended to wash the bottle before use. Then, make several holes in it with a heated knitting needle or nail. To prevent the sprayer from spraying large jets of water, you can apply one trick. You will need frames of ordinary plastic handles.
It is necessary to measure the diameter of the handle in its thinnest part and drill slightly smaller holes in the bottle. After that, the handles should be cut to a length of 5 cm and inserted tightly into the holes. The tips of the handles are quite sharp and provide smooth and orderly watering of the garden. Instead of pens, you can also use any other handy tools that you can find. It will be optimal to make five holes in each row. In winter, sprayers are usually removed from vegetable gardens.
To make a do-it-yourself irrigation controller, an ordinary valve is suitable, which is used to control water in plumbing systems. It also regulates the water pressure. Such a controller must be installed at the base of the hose. A smoothly opening valve will provide dynamic pressure control. For convenient fastening of the hose to the bottle, special adapters are used.
A hole is drilled on the bottle cap in diameter like that of an adapter. Fasten the adapter to the cover with silicone glue. Such a do-it-yourself sprayer is placed next to a plant that needs watering. For a full-fledged watering of the garden, several of these sprayers will come in handy.
Video “Do-it-yourself sprayer option”
Another option for a do-it-yourself sprayer from a plastic bottle.
