Does the technique turn the drum worse and worse every time? During the spin cycle, you hear a hum, creak, vibration is exceeded? Then you should think about checking the drum attachment mechanisms. Replacing the Samsung crosspiece is carried out not only in workshops, but also at home. How to do it?
Here’s how to do your own washing machine repair:
Washer “Самсунг”began to knock and vibrate strongly during operation. As a result, the drum began to spin badly until the machine completely stopped.
It is necessary to remove the drum from the SMA and unscrew the bolts around the perimeter. There should be 14 bolts in total.
Remove the top half of the tank along with the drum. The photo shows that the shaft broke. You will have to completely change the element.
Remove the pulley by unscrewing the central bolt for this.
Next knock out the steering axle using a hammer and chisel.
Here’s what the axis looks like. As you can see, the crosspiece is completely destroyed (it’s amazing how the technique worked).
Prepare a new cross. Carefully choose the part, it must match the brand and model of the washer. For example, Samsung Diamond, Samsung WD806U2GAWQ and others.
The Samsung cross should fit perfectly into the grooves, so twist it to find the best position.
Lubricate the mounting bolts and secure them in place.
Lubricate the axle with “Litol”.
Replace the pulley.
Install the drum and assemble the tank.
It remains to install the tank in the case and assemble the washing machine in the reverse order. Replacing the cross is not difficult, the main thing is to properly disassemble and assemble the equipment. Good luck!