Contents
Professional equipment for catering establishments not only cleans, but also disinfects appliances, providing you with clean dishes throughout the day. Project dishwashers use little water and electricity, especially when compared to manual washing, while cleaning dishes, glasses and cutlery efficiently.
About Project
The Italian company began its work in 1991 as a manufacturer of professional equipment for washing cars. Today, it has grown so much that it produces from 10 dishwashers a year.
Here are the main components of a successful production company:
- Qualified staff.
- Caring for the environment.
- Compliance with technological standards.
Each buyer will be able to choose the right equipment, from budget options to expensive large-sized machines.
The Project company produces dishwashers of various types, each of which is divided into lines with its own characteristics: frontal, dome and tunnel, as well as machines for washing inventory.
Frontal dishwashers
Reliable models with an intuitive control panel. Ease of maintenance is provided by frontal access to the camera. Manufacturers have made sure that the user does not have problems with spare parts – each machine comes with its own set.
PMM of this type are divided into three series:
- Jet;
- Alpha;
- Unique.
JET 500 plus
The compact case – 83,5x55x60 cm – is made of stainless steel. The technique works automatically. There is a built-in microswitch that blocks the sink when the door is opened.
All parts have front access, so there will be no difficulties with maintenance. Built-in two spray: upper and lower for washing and rinsing. Drainage pump and peristaltic dispenser are optional. Resistors received anti-corrosion coating. There is a non-return valve to prevent water from entering the sewer into the chamber.
The chamber includes baskets measuring 50×50 cm.
All functions are typical for other models of the series.
Only 35E
Models of this series differ in ergonomic design. The case measuring 42x50x65,5 cm is made of stainless steel. The flat handle will not interfere with placing Unica 35E in a place convenient for you. The stainless steel tank is made of a single piece of Aisi 304 steel.
There are three wash programs to choose from. Their duration can be selected depending on the contamination – up to 120 minutes. The built-in boiler is equipped with a thermostat that allows you to set the temperature or turn off the heating in the absence of water.
Built-in safety switch and check valve. Productivity per hour is 30 cassettes with a size of 350×350 mm.
ALPHA 40 LS
Suitable for small cafes and bars.
PMM features:
- Access to all parts from the front.
- Stainless body and tank.
- Possibility to install a dispenser for detergents and a pump.
- The presence of two sprayers: upper and lower.
- Boiler with adjustable thermostat.
- Filter for water purification.
- Non-return valve.
- Microswitch when opening the door.
Dimensions: 69,5x45x52 cm. Cassettes 40×40 cm.
Dome PMM
Dome type models are more productive, suitable for restaurants, canteens of medium size. Equipped with a peristaltic rinse aid dispenser. If the case is supplemented with tables for loading and unloading dishes, using PMM will become even more convenient.
Project Systems T110
Equipment with dimensions of 151,9x73x81,9 cm. Holds baskets measuring 50×50 cm. Washes plates, trays, baking sheets, cutlery. Automatic start of a sink facilitates work of the operator.
The control panel allows you to choose from two wash cycles of 90 and 120 seconds. The tank is designed for 15 liters, consumes only 2,7 liters of water per cycle. Additionally, you can order a dispenser for detergent, a drainage pump.
Project Systems T1515
The machine measuring 156,5x79x83,5 cm will help you wash dishes, glasses, trays, containers, containers. Baskets measuring 50×60 cm are used.
Using the touch panel, you can select one of four modes:
- 60 second;
- 120 second;
- 180 second;
- continuous mode.
The tank is made of a single sheet with rounded edges, so it is self-cleaning: there are no seams and corners in which dirt accumulates. The dome on spring lifts is easy to raise and lower. There is a self-diagnosis function, thanks to which you can quickly calculate the cause of the breakdown.
It is possible to additionally order a dispenser, a pump, a filter for softening water, as well as a heat recovery unit. In the latter case, the heat during washing is stored and used during subsequent cycles.
Tunnel (conveyor) machines
Conveyor dishwashers are highly efficient. For an hour of work, they process up to 200 baskets of dishes. The body and doors are double insulated, so they perfectly retain heat, do not heat up and reduce noise levels.
Temporary control allows you to save resources. If the last basket does not go into the sink, the program is temporarily stopped. Drain pumps have a self-cleaning function. By adding prewash and dryer tables to the machine, the process can be fully automated.
The series includes two models: CT 200 and CT 120. They differ in size and availability in one drying unit.
Project Systems CT 200
The equipment is suitable for large workshops and kitchens. The dimensions of the case are 161,5×197 (257 with drying)x77 cm. Double wall insulation, automatic start are provided. It is also possible to install a pre-wash.
With hygiene in the chamber, a tank with rounded corners and a self-cleaning pump do an excellent job. The performance of the CT 200 is impressive: 200 baskets or 3960 items are processed per hour. The drain filter is made of stainless steel. A drying module is provided, where the dishes fall after washing and rinsing.
The heat recovery unit is also included in the design, so the model is not only productive, but also economical. The door opens completely, which allows you to quickly and conveniently install 50×50 cm baskets.
PMM for washing kitchen utensils
These are pan-washing models that have a large capacity.
Project S 200
It has a case 190×85,5×85 cm with double walls. Self-cleaning pump keeps the chamber clean. Filters purify water for reuse, which saves on its consumption.
There are 4 washing modes lasting from 2 to 12 minutes. The special AWT rinse system reduces water consumption by 20%. Thanks to the anti-vibration system, it is impossible to guess the end of the cycle, so the user is alerted by an indication or a sound signal. There is a built-in self-diagnosis system.
The model is equipped with a special cycle for cleaning the chamber. Basket dimensions: 70×70 cm. They can accommodate plates, baking sheets, trays. You can also wash pots, boilers, containers.
Project S 350
Suitable for washing large items. The height of the loading opening is 85 cm. Cassettes of 132×70 cm are placed in the chamber.
Features:
- Half load function. Only one of the two pumps is activated, saving water and energy.
- Special guides make it easier to load a full basket into the chamber.
- Detergent and rinse aid dispensers. The indication on the panel informs about their end.
- Four wash cycles from 2 to 12 minutes.
- The AWT rinse system reduces water consumption by 20%.
- The control panel with display shows the time until the end of the cycle.
- Self-diagnosis of faults speeds up maintenance.
- At the end of the program, you can start washing the PMM chamber.
The body dimensions are 190x147x85 cm.
Given all the advantages of technology, it should be in every kitchen of a public institution. Special equipment reduces the amount of resources consumed. Simple and automated operation requires only one person to load and unload dishes.