Contents
Plaque in the bathroom: how to remove it from the surface? Video
Keeping the bathroom clean is a guarantee of health and good mood. Glossy surfaces, snow-white plumbing, sparkling clean walls and floors – all this can be achieved with the right cleaning agents. The main problems in the bathroom are quickly forming water scale, rusty streaks and soapy deposits. Systematic cleaning will help get rid of these troubles.
Plaque in the bathroom: how to remove it from the surface?
Do not wait until the taps and valves are covered with cloudy spots, and the sink becomes rough from soap streaks and water stone. The easiest cleaning recipe is to wipe down all surfaces immediately after you wash, wash or shower. Keep microfiber cloths and small terry towels handy. It is convenient to wipe the taps and the surface of the sink with a dry towel to a shine, and with a microfiber cloth, you can wipe off the streaks on the mirror or the walls of the shower stall in a couple of minutes.
After taking a bath, rinse it thoroughly and erase the horizontal stripes on the walls with a sponge. Foam baths help prevent plaque build-up, but herbal extracts, scented bombs and a variety of oils can leave stubborn stains on the surface. If you use such products, clean the bath with a sponge with a special emulsion or cream after each procedure.
Do not use powders and pastes – liquid and creamy products are equally effective, while they do not scratch the surface of the plumbing
We clean the bathroom: the secrets of the hostess
To make the tiles on the walls shine, regularly wipe them with vinegar mixed with water in the proportion: – 1 glass of vinegar; – 1 liter of water.
Then dry the tiles with a soft towel. This solution will help remove rust stains or limescale. Is the vinegar smell annoying? Replace it with citric acid or fresh lemon juice.
Do not use metal sponges. The best choice is soft latex or foam sponges, they do not scratch the enamel surface. Old toothbrushes work well for hard-to-reach areas.
If the grout in the grooves of the tile has darkened, prepare a mixture of crushed chalk, soda and warm water. It will not only wipe away soapy deposits and water stone, but also make the grooves whiter. Repeat the procedure regularly, at least once every two weeks. Faded taps and valves can be cleaned with a damp cloth and baking soda. Polish the surface and then wipe off the powder with a dry cloth.
Clean the sink and bathtub with a mild, non-abrasive product. Do not use aggressive powders and liquids containing alkali, they will scratch and corrode the enamel. Toilet bowl cleaners are also not suitable – they contain a very high concentration of acids. When using pipe cleaning fluids, be careful not to get it on the enamel.
Chlorine-free laundry bleach will help get rid of yellowish deposits on the walls of the tub. Apply it in a thin layer, wait 10-15 minutes, then rinse off. If the bath is very running, the procedure can be repeated.