Pike in the fall on a jig: the subtleties of fishing from the shore and boat

You can catch a toothy predator all year round, the main thing is to know what gear to pick up and how to use them correctly. Catching pike on a jig in the fall has a special way, here the main role is played by the selection of bait, as well as the jighead itself. The components of the gear are selected individually, while taking into account various factors.

Tackle selection

Catching pike on a jig in autumn from different places also provides for special gear, but there will be no strong differences from those used for other predators at this time of the year. The components are standard, only the characteristics are worth paying attention to.

The fishing rod is chosen depending on the place of fishing:

• from the shore they take longer, sometimes up to 3,3 m;
• fishing from a boat will require shorter forms, 2 meters is enough.

It is desirable to catch pike on a braided line, therefore the reel is selected with a metal spool. By the number of bearings, it is better to give preference to an instance with at least three.

Basis

Having chosen the blank and the coil, they proceed to the selection of the base. The best option would be a cord, but monofilament is also used quite often. In terms of diameter, it is preferable for weights up to 20 g to choose a braid of 0,1-0,12 mm. If fishing is carried out using larger heads, up to 50 g, then the cord is set at least 0,15 mm.

You can also put a fishing line, but the thicknesses must be appropriate. For loads up to 20 g, the basis of this type should be up to 0,28 mm; the use of heavy heads will require its increase.

Leashes

Putting leashes for catching autumn pike on a jig is a must, as sharp teeth will quickly grind the base. The best options for autumn are:

• fluorocarbon, it is not noticeable in water, but has worse strength indicators than the rest;
• tungsten, it is strong and soft, which means it will not interfere with the game of the bait, but is noticeable in the water and tends to curl quickly;
• steel is the most preferable according to experienced anglers, it has practically no memory and is distinguished by its strength.

It is not advisable to put a leash made of fishing line or cord thinner, it will quickly become unusable.

Findings

To connect all the parts, you will additionally need to use various small parts, among them:

• swivels;
• fasteners;
• winding rings.

When choosing products for collecting tackle, it is necessary to pay attention to their breaking loads, they should be an order of magnitude less than that of the base. Then, when hooked, the bait will be lost, but not the line itself.

Bait selection

Catching pike in the fall makes the spinner to be fully armed, in the arsenal there should be a variety of baits both in color and in material. All of them are divided into silicone and foam rubber, and the colors can be different:

• The most common are silicone fish from Manns and Relax, they have been used for several generations, but this has not worsened their catchability. In autumn, both naturally colored baits and acid lures are chosen for pike. The presence of sparkles and inclusions is welcome. The contrasting tails, head, back perfectly attract the attention of the predator, but translucent and transparent options no less successfully irritate the pike, they should not be cut off categorically.
• During this period, not a single spinning player can do without twisters, they are also chosen from the above companies or they use edible silicone from other manufacturers. It is advisable to choose a larger size, a very small bait may go unnoticed.
• Foam rubber is also attractive, they are often used for catching by the stingray method. Although this bait is considered more zander, but under certain circumstances it was with it that trophy specimens were taken.

In addition to silicone and foam rubber, in the autumn, pike also responds well to baubles, they especially like fluctuating ones. The predator responds worse to turntables, and even with grass in a pond, the hooks of such a bait will often get confused.

Head selection

The most difficult thing sometimes becomes the selection of a jig head for the bait. Here they start from the test indicators of the spinning blank, fishing at the desired depths, and the presence of a current. The selection is made according to the following rules:

1. In early autumn, when fishing at shallow depths and using a blank with a test of up to 25 g for silicone and foam rubber fish, heads up to 20 g are used. This is quite enough to attract attention and catch pike.
2. In the middle of autumn, you will need a blank with a higher maximum test if you plan to fish in the current or on lakes with sufficient depths. The head is placed 30-32 g, while you can use both a collapsible cheburashka and a jig with a soldered load.
3. In late autumn, when all the fish roll into the pits, they put heavier weights that will help lure the predator even there. During this period, loads of 50 g, and sometimes more, are used on the rivers. On the lakes, 20-30 g in the heads will be enough.

It makes no sense to use lighter options, since the bait simply cannot touch the bottom, and heavier ones will lower it there very quickly.

Choosing a place to fish

The place of fishing will become no less important, it will change every autumn month:

Walking through these places with spinning, everyone will get a trophy in the form of a toothy predator.

Proper installation of equipment

It is not difficult to correctly assemble tackle for pike fishing in the autumn, some subtleties must be taken into account. The collection is carried out as follows:

• the base is wound on a coil;
• a leash is attached to the cord through a swivel;
• on the other side of the leash there is a fastener, it is with its help that the bait will be fastened.

It is not advisable to use clockwork rings and beads for mounting, such accessories will only scare away a predator or simply make the tackle heavier.

Subtleties of fishing

In autumn, fishing is carried out both from the coastline and from boats. However, each of these options has its own subtleties. Only anglers with experience know about this, a beginner will have to first learn all this either from older comrades, or by trial and error.

Shore fishing

From the coastline, fishing in the selected water area is quite problematic, because it is not always possible to cast the bait to the right place. In addition, bushes and trees along the shore can become a tangible barrier.

To catch a pike, a spinning player will have to walk a lot, even a small lake will have to be caught from all sides several times.

From the boat

The presence of a watercraft greatly simplifies fishing and increases the chances of getting a trophy specimen. On a boat, you can better explore the bottom of a new reservoir, and in some cases see with your own eyes the parking places of a predator.

Fishing is carried out gradually, as you move. There is no need to make strong throws, because if you wish, you can always get to a promising place.

During the night

The jig will also show itself well at night; for this, a firefly is additionally attached to the tip of the spinning rod. Casts can be carried out both from the shore and from a boat, while in most cases the trophy pike will be located precisely in deep pits.

Wiring

The effectiveness of fishing also depends on the ability to hold the bait; in this regard, you can experiment with a jig. There are many ways, everyone chooses the most effective for himself, makes his own edits and distinctive movements. There are several main ones, each has its own characteristics.

classical

This method of baiting is the simplest and most effective. It is used by both beginners in spinning and anglers with experience.

This is done like this:

• immediately after casting the bait, you must wait a few seconds for the bait to reach the bottom;
• as soon as the thread starts to fall, it is necessary to make 2-4 turns with the reel handle, while the bait moves about a meter;
• followed by a pause of 3-5 seconds.

After that, the process is repeated exactly, bringing the bait as close as possible to the shore or watercraft.

American way

The wiring of this type is very similar to the classical one, they will differ in that the movement of the bait is carried out with a withdrawal towards the tip of the rod. Next, the blank is returned to its original position, and the slack of the base is wound onto a coil.

stepped

One of the most effective for jig, they carry out the bait according to the step principle:

• cast and wait for the bait to sink completely;
• then it is slightly raised above the bottom;
• again allow the bait to fall completely.

And so to the angler. The game of the bait, silicone with a jig, will be special, it will attract the attention of even the most passive predator.

Aggressive

This wiring method perfectly imitates a fish running away from danger, while you need to work with both the spinning blank and the reel. It looks like this:

• after waiting for complete immersion, the bait is sharply thrown up with a rod and the line is pulled out in parallel;
• then the blank is allowed, and the winding of the fishing line is slightly reduced.

Such movements lead the bait all the time.

“To be demolished”

This method is very actively used in cold water, it is he who allows you to catch really trophy pike. The wiring is very simple, the bait is simply thrown into the pond and waiting for it to sink to the bottom, the water presses it to the bottom and the current blows it away little by little.

An important point will be the selection of the head: the light one will rise into the middle layer of water, and the heavy one will simply plow the bottom.

Uniform

The name speaks for itself, with this method, apart from the coil, nothing else takes part in the work. The game is achieved by uniformly winding the warp onto the spool:

• slow will allow you to hold the bait at the very bottom;
• the middle one will lift the silicone into the middle layers;
• a quick one will bring it to the surface.

In autumn, slow and medium speeds are used.

Useful Tips

Pike on a jig in late autumn is great to catch, but for this you need to know and apply some tips. Experienced anglers share the following subtleties:

• for the base it is better to take a cord, while the eight-core one will be stronger;
• steel leashes can be made independently from a guitar string, they often do not use fittings, but simply twist the ends;
• silicone baits can additionally be equipped with noise capsules, so they will attract even more attention of the pike;
• installation for grass is done through an offset hook and a collapsible load, the bait will not catch on during wiring;
• to catch a trophy pike, you need to choose places with holes and catch their surroundings well;
• microjig in the autumn period is almost inactive, it is better to leave it until spring;
• in the autumn period, among other things, the fisherman should have a hook in the arsenal, often this tool helps to bring the catch to the shore;
• baits for autumn fishing are chosen not small, three-inch fish and more will be an excellent option;
• foam rubber is best used with demolition wiring.

The autumn pike responds well to the jig, the main thing is to be able to pick up the bait and draw it with attractive wiring for the predator.