Contents
- Types of fixtures
- Advantages and disadvantages
- Outdoor autonomous solar power plants
- Autonomous solar-powered street lamps
- Solar floodlights
- Solar-powered lamps and lanterns for summer cottages, gardens and country houses
- Purpose and principle of operation
- Variety of designs
- What does the market offer?
- Oasis Light P 9012
- Oasis Light Ledspot 6144S-2 Solar
- TD 0404
- Solar Wall lamp
- Gitex
- Mpow 54
- Solar Novotech 357207
- Globe 33080-3
- Solar Novatech 357217
- HorozMagic 078-007-001
- Novotech Tile 357235
- Paulmann Boden 93777
- Paulmann Boden 93775
- Uniel USL-S-104/MT810 Lyli
- Novoteck Alice 357199
- Solar Globe 3314
- Solar Globe 331
- Solar Al 33913
- Novotech Alice 357200
- E5209
- Sakura Tree, PL 311
- In the form of a stone
- Solar Globe 33970G
- Uniel USL-S-141/PT280 “Garden Star”
- Engo Solar 48595
- Solar 357215
- Feron “WELL LITER” on the water
- Lawn Feron
- “Dragonfly” by Feron
- Operating conditions for stand-alone luminaires
In modern conditions, street lighting is an invariable element of comfort and safety of movement in the dark.
It is necessary in private areas, on the streets of settlements, on highways and other places.
But what about a situation where the installation of lamps is carried out at a great distance from sources of electricity?
To save money and simplify work, autonomous solar-powered street lighting is used.
What are its features? What types of autonomous lights are there? What does the market offer? We will consider these and other questions in detail.
Types of fixtures
Modern technologies do not stand still, which contributes to the emergence of many original designs that are ready to decorate and illuminate any area.
Today, the following types of solar-powered street lamps are distinguished:
- Type:
- Autonomous lamps for illumination of transitions, pedestrian zones, streets and roads.
- Classic lanterns and lamps with solar panels.
- Searchlights.
- Autonomous power plants.
- Location of solar panels. They can be performed as a separate device or built into the structure.
- By appointment. Today, autonomous lamps are produced for summer cottages and gardens, for lighting recreation areas, for park areas, for garages, for country houses, camping and others.
- At the place of installation. Devices are wall-mounted, with installation on the floor, on the ceiling, on or in the ground.
- By type of installation – suspended, overhead or built-in type.
- By the presence of a motion sensor – with or without it.
- By control – with the possibility of regulation, switching on and off using the remote control or only by manual control.
In addition, various types of fixtures also have a classification:
- Devices for the garden are lawn, decorative, in the form of garden figurines, landscape, as well as for installation on the water (surface or underwater).
- Autonomous light sources for the street are produced in the form of spotlights, lanterns, lamps and street sconces.
Advantages and disadvantages
Solar-powered street lights are in increasing demand. But they also have advantages and disadvantages that must be taken into account during the selection and installation process.
The pluses include:
- No costs for electrical energy and voltage supply, which is the main advantage of such products.
- Possibility of illumination of any areas. Autonomous lamps are a salvation for places where it is not possible to bring centralized electrical networks, and power lines are at a great distance.
- Environmentally friendly and easy to recycle.
- Significant savings on the creation of technical conditions, installation of power lines, cable laying and other activities necessary to power the lamps.
- Long service life. In autonomous flashlights, the “weak link” is the battery, the service life of which, as a rule, is no more than 10 years. In turn, solar panels and LED lights last 30 and 27 years, respectively.
- The cost of some models is very democratic, which allows you to buy and install such devices in various places.
Of the minuses, it is worth highlighting:
- The efficiency of light sources depends on climatic conditions. The solar battery is able to capture even scattered sunlight, but the amount of energy generated in this case is reduced. Consequently, the use of autonomous light sources in regions with a small number of sunny days will be less effective.
- Prolonged operation in conditions of “minus” temperatures can lead to battery malfunctions. At the same time, intense and prolonged heat often causes semiconductors to overheat and break. A cooling system is recommended to avoid problems in hot weather regions.
- With frequent and strong winds, the protective glass of the battery becomes clogged, which reduces its efficiency.
- Periodic maintenance is required to ensure reliable operation of the device. It is worth remembering that the appearance of dirt, stains and dust negatively affects the solar battery performance parameter.
- When choosing a device, you need to take into account many nuances – the number of LED bulbs, battery capacity, the material from which the photocell is made, and other parameters.
Outdoor autonomous solar power plants
Autonomous power plants are an independent source of electrical power, which is prepared for installation, has a monoblock design and produces 12 volts direct current.
Purpose and scope
Autonomous power plants generate the voltage necessary to power luminaires located at a distance from household mains sources.
Battery installations accumulate electricity during daylight hours and give it to light sources according to a given controller program.
Charging of the device is made including in the winter and in cloudy weather.
The use of an autonomous power plant allows you to avoid dependence on electrical networks and provide high-quality lighting for areas that are far from consumers.
The devices are actively used to power various types of lamps (cottage, park and street), road signs and traffic lights, spotlights for billboards, power photo and video recording systems, parking machines, insect control systems, electrified containers and tanks.
Types
Today, there are several types of autonomous power plants:
- with traffic light;
- With a video camera;
- With lamps;
- Combined type (universal).
The device and the principle of operation
The main such power plant is a housing made in the form of a monoblock.
A solar panel, a connector for its connection, a controller, and a connector for connecting an electrical consumer are attached to it. The battery is mounted inside the casing, after which it is closed with a cover and fixed with bolts.
The design of most of the devices has an anti-vandal design, which contributes to protection against mechanical influences. The resource of products is at least ten years.
Depending on the place of installation, fastenings for installation on a pole or other structure may be provided.
A special bracket is also included in the kit, and a mount is also provided on the device itself.
The main feature of the device is complete autonomy of work. A single-crystal solar battery provides battery charge during daylight hours. The accumulation of energy (albeit to a lesser extent) also occurs in the cold season and in cloudy weather.
Another element of the device is a microprocessor controller, which ensures that the optimal voltage is maintained in the charging mode of an autonomous power plant. It also eliminates the complete discharge of the battery in conditions of deficiency of sunlight.
All connectors are absolutely sealed, which increases the reliability of the device and guarantees its performance in any weather.
See also:
Autonomous solar-powered street lamps
No less popular are street lamps, the autonomy of which is also ensured by the presence of solar panels.
Purpose and scope
Solar-powered lamps are reliable helpers in areas where there is no way to supply electrical energy. They are also used in areas where obsolete street lamps with classic mains power are being replaced.
Such lighting devices are most in demand when illuminating roads in areas between settlements.
They are also used to illuminate public transport stops located at a distance from cities and villages, to illuminate production sites, recreation areas and parks.
The advantage of the devices lies in the independence of the electrical network, which allows you to illuminate any area without installing metering devices, obtaining permission to supply the electrical network, laying cable products and performing other installation work.
The device and the principle of operation
Solar-powered street lamps are autonomous and operate due to the accumulated energy of the rays during the daytime. A powerful solar battery provides battery charge during the day, including in winter and in cloudy weather.
Many devices come with a motion sensor and have a wide CSS chart. A feature of modern sensors is the ability to cover a large area and be triggered in the presence of movement even at a distance of 13-15 meters from the light source.
The device comes with connectors and fasteners, which allows installation within 15-20 minutes without the use of special equipment.
After the installation is completed, the solar-powered lamp works independently and without human intervention.
Economic effect
One of the main advantages of solar-powered luminaires is the economic effect due to the real savings in supplying electricity to the place of installation of light sources and connection costs.
The funds invested in the purchase of autonomous lamps pay off instantly. In addition, after installation, you can count on an additional effect associated with saving money on electricity bills.
In general, the installation of such lighting devices allows you to save on a set of measures – project development, construction work, power supply, obtaining permits, installing meters, paying for electricity and periodic inspection (maintenance).
What does the market offer?
The modern market offers many types of solar power plants with a lamp.
Let’s highlight the main options.
SSE-300-150
A modern device with a monocrystalline silicon solar panel with a power of 12 watts. The voltage at the output of the power plant is 12 V. The total weight of the device is 72 kg.
During the installation process, it is worth taking into account the dimensions of the lamp with a solar battery, which are 148,7 * 78 cm, and the landing diameter is 10,8 cm.
To achieve the greatest efficiency, installation should be carried out at a height of three to ten meters.
The device kit includes a metal case that reliably protects against mechanical influences, a 150 mAh battery, a multi-program controller (battery and solar batteries), as well as connectors for connecting the load and the solar battery.
In addition, the box contains a solar panel, an LED lamp, as well as the necessary fasteners.
SSE-150/65
A powerful lamp that is powered by a solar power plant and is used in areas with difficult electricity supply. It is also used in the process of replacing obsolete light sources.
Its advantages lie in the autonomy of operation and the ability to connect without a cable, obtaining technical conditions and performing other work. Battery capacity – 65A * h.
The solar battery is monocrystalline, made of silicon and has a power of 12 watts. The output of the device is 12 volts, which is enough to power the fixtures.
See also:
The power plant weighs 39 kg, and its dimensions are 148,7 * 78 cm. To achieve the greatest efficiency, installation should be carried out at a height of three to ten meters.
The kit comes with a powerful vandal-proof powder-coated case, a battery, a programmable controller (batteries and batteries), connectors for connecting light bulbs and a solar battery, a 150 W and 12 V solar panel, as well as brackets for mounting the station and LED lamps.
Autonomous lamp 20+20 W type SSE-300/300
A product that does not depend on an external power source and is capable of operating without human intervention.
Like other devices of similar types, it is used in places where there is no possibility of supplying voltage or this process is economically unreasonable.
The solar battery of the device has a power of 12 W and is supplied with a battery with a capacity of 150 Ah. The output of the device is 12 volts.
The total mass of the power plant is 126 kg, and the dimensions are 148,7 * 78 cm. To achieve the best result, it is recommended to install the device at a height of 3 to 10 meters.
Complete set of the SSE-300/300 model of the standard. It includes a case made of metal and having a powder coating, a battery, a controller, connectors for switching the load and a solar battery, the solar panel itself, as well as mounts and LED lamps.
Solar floodlights
No less popular are solar-powered spotlights, which are distinguished by increased power and autonomy.
appointment
Solar-powered floodlights are usually used to illuminate large areas – parking lots with cars, warehouses and other structures. Also, such devices can be useful for lighting the garden and the local area.
Design features
By design, spotlights have much in common with the devices discussed above. They also provide an LED lamp, a solar module, a controller and other elements that ensure the operation of the product.
The self-contained searchlight itself can be of two types by design – with or without an external solar battery.
What does the market offer?
Today, there are a large number of stand-alone spotlights on sale, which requires a careful approach to the choice.
Let’s take a look at the most popular options below.
With remote solar panel.
SOL 80 with IR motion sensor
The device is based on eight LEDs with a power of 0,5 W. The total light output is about 350 lm. The glow time when the battery is fully charged is 110 minutes. Device dimensions – 21 * 16 * 1,6 cm.
For greater efficiency and savings, a motion detector is provided with a detection angle of 130 degrees. Installation should be carried out at a height of 2 to 2,5 meters.
The switching time is adjustable in the range of 10 seconds. Overcharge protection provided. The protection class of the device is IP44, and the operating temperature range is from 5 degrees below zero to 45 degrees Celsius. Weight – 1,3 kg.
When installing the solar module, it is recommended to point it to the south side to improve efficiency and capture more sunlight.
See also:
The average angle of elevation should be about 30 degrees, which contributes to the self-cleaning of the device from snow, dust and dirt. The device is equipped with a motion detector that detects the presence of a person in the area of observation and automatically turns on.
sun globe
Floodlight with a remote solar panel, which is made in Austria and has a ground version.
The device is made in a modern style has a chrome color and four LED lamps.
Dimensions are 18 * 16 * 16 cm (length, width and height). Voltage – 220 volts.
Plastic was used as a material in the manufacture. The main purpose is installation on the street for lighting suburban areas and a country house.
Novotech Solar
A powerful spotlight that is great for illuminating the entrances to various premises, whether it is a garage, a barn, a house or other areas without an electrical network. The spotlight is able to illuminate an area of up to 10 square meters.
Connection to the solar battery is made using a 3-meter cable. The battery is charged during the day, and the battery itself is built into the spotlight.
The kit includes a motion sensor, which is installed at a distance of up to eight meters from the lamp. When an object is detected in the coverage area, it instantly gives a command to turn it on.
The glow time can be adjusted from 10 to 60 seconds. After the specified period, an automatic shutdown occurs.
The spotlight is made in black, has a power of 6 W, is mounted on the wall. In the manufacture of the case, aluminum casting and plastic were used.
The color temperature is 5000 K. The mounting height is 2,1 m. The operating temperature is from -20 to +40 degrees Celsius. The light scattering angle is 130 degrees. Battery capacity – 2200 mAh. The number of LEDs is 12.
See also:
Globe 3723S
Searchlight with a remote solar battery, which has the following dimensions – 18 * 18 * 11 (height, width and depth).
The maximum lighting area is only 0,7 square meters. meters, which allows you to use the device for decorative purposes.
The lamp voltage is 230 V, and the power is 0,06 W. Degree of protection – IP44.
The lamp is made in Art Nouveau style, has a plastic transparent body. The total number of lamps is 22. Two shades are directed in different directions.
With built-in solar panel.
SP23334 for 36 LEDs
Powerful street spotlight with a built-in 5W solar battery. The product is made of aluminum and has a white color. The kit includes all the necessary fasteners for installation.
The degree of protection is IP65, and the dimensions are 65 * 31 * 6 cm. The luminous flux is 100 Lm, the voltage is 12,8 V. The warranty period is one year.
SP2333 for 36 LEDs
Another popular outdoor spotlight model with a built-in outdoor battery.
The product is made of aluminum, has a touch control and the necessary fasteners included. White color. Stand-alone lamp dimensions – 40 * 21,5 * 5.5 cm.
The features include a power of 5 + 2 W, a voltage of 6,4 Volts, as well as a glow color of 6000 Lm. Degree of protection of the device — IP65.
SP23332 for 64 LEDs
Another popular model, which has a brighter glow color (6000 K) and smaller dimensions – 38,5 * 18 * 6,8 cm. The degree of protection, like the previous model, is IP65. The kit includes mounting brackets.
The material used is ABS plastic, which is resistant to mechanical stress. The power of the spotlight with a built-in solar battery is 5 W, and the rated voltage is 6,4 V.
Solar-powered lamps and lanterns for summer cottages, gardens and country houses
In recent years, such elements of landscape design as autonomous lamps and lanterns powered by solar batteries and designed for installation in the garden, when arranging a plot of a country house, and lighting a summer residence, have become increasingly popular.
Purpose and principle of operation
Solar-powered lamps for summer cottages, gardens and country houses are a reliable assistant in organizing lighting for various areas and territories where it is not possible to power light sources with household voltage. It can be a path to a gazebo in the country, a beautiful garden or a seating area.
Lamps can be hung at the main entrance or used to decorate sections of a country house (cottage).
See also:
With the help of such devices, it is possible to significantly save on laying cable products and paying for electricity. Solar-powered lamps and lanterns are easy to install, have an affordable price and a long service life.
Devices consist of several elements, each of which takes on a specific task.
The LED lamp provides illumination of the site, the solar battery converts the sun’s rays into electrical energy, and the battery accumulates charge.
Equally important is the controller, which regulates the level of charge and voltage supplied to the lamps.
A big plus is the presence of a photocell, which provides automatic switching on and off of the device. The main equipment is protected by the case.
In addition to the main elements, solar-powered lamps and lanterns can be supplemented with sensors that control the level of illumination and movement.
The principle of operation is simple. A special element during the day converts the sun into electricity and charges the battery. As soon as darkness falls, a photocell is activated, which collects an electrical circuit and provides illumination of the required area.
When the sun appears, a sensor or photocell is triggered, after which the lighting is turned off. When fully charged, LED lights can work for 8-10 hours or more.
Variety of designs
Lanterns and solar-powered lamps are represented by a large number of models that can be classified as follows:
- Floating lights (for pool, pond and fountain).
- Bollards are concise products that look like columns and are designed to illuminate lawns and paths.
- Recessed lights – suitable for decorating paved areas and stairs.
- Suspended and wall lights – fixed on the fence, poles, as well as on the surfaces of any buildings.
- Underwater light sources (for reservoirs).
- Decorative lanterns that look like fairy-tale characters or garden dwellers.
- Lamps for decorating flower beds with a large number of flowers. As a rule, they are made of transparent material, which makes them invisible during the day.
The presence of such a classification helps to quickly select the appropriate lamp and lantern, taking into account the conditions of use and the place for installation.
What does the market offer?
Today, a large number of different devices are at the disposal of buyers. Consider the most interesting options.
Wall mounted.
Oasis Light P 9012
Wall lamp with four bulbs, each with a power of 1 W and a voltage of 7,4 Volts. The total power is 4 watts.
The product is made in a modern style, has a degree of protection against moisture and dust IP44 and the third class of electrical safety.
The battery is included. The model is in grey. Material – plastic.
Oasis Light Ledspot 6144S-2 Solar
High quality wall mount light source with one 2W LED bulb. Voltage 230 V. Dimensions of the model are 18 * 5 * 26,1 cm.
The product is made in a modern style, has a degree of moisture protection IP44, and the third electrical safety class.
The color temperature of the lamp is 4000 K, and the luminous flux is 200 Lm. A battery is supplied with the device.
The plafond is made of metal, has a light gray color, which allows it to be used in any interior.
TD 0404
A device for street lighting, which is installed in places where there is no way to supply electricity.
The lamp is powered by solar panels and turns on when it gets dark.
The advantages include the moisture protection of the IP55 case, the ability to work from solar batteries and conventional AA power supplies.
The design provides six bright LEDs that work up to 8 hours on a single battery charge. Installation is carried out in two versions.
Solar Wall lamp
An energy-efficient light source with an original design that gives originality to the design and illuminates the area.
Solar panels convert the rays into electrical energy during the day, and at night the batteries give off voltage and power the lamps.
The device has an IP65 protection level, a nickel millihenry photocell and a voltage of 6 V. ABS plastic is used as a material in the manufacture. Replacement bulbs included.
Gitex
Open-type luminaire, reliably protected from moisture and having touch control. The number of bulbs – 6 pieces. Degree of protection – IP65. The power of solar panels is 0,55 W.
The kit comes with a lithium-ion battery with a voltage of 3,7 Volts and a capacity of 800 mAh. Charging time is six to eight hours. Scope of application – lighting of the porch, passage, garden, road and other areas.
The features of Gitex include quick and easy wall mounting, automatic delays, protection against heat and water, durability, energy saving and the ability to work autonomously for 8 hours on a single charge.
Mpow 54
A solar-powered luminaire with a modern design and IP65 protection rating. The supply voltage is 6 volts. The body is made of ABS plastic. The main area of application is industry.
Lithium rechargeable battery. Battery life on a full charge is seven to eight hours. The size of the device is 31*11,5*55 mm.
The features of the model include effective lighting, which is provided by 54 powerful LEDs, reliable protection against moisture, excellent sensitivity of the motion sensor, several operating modes, as well as ease of installation.
For illumination of paths and installed in the ground.
Solar Novotech 357207
Modern lamp, made in Art Nouveau style and made of metal. The plafond is made of white glass. The height of this model is 36 cm and the diameter is 8 cm. Protection class IP65. LED lamps have a glow temperature of 4000 K.
Globe 33080-3
An unusual lamp that is installed in the ground and looks like a flower. The height of the product is 420 mm, the diameter is 10,8 cm.
The lighting area is only 0,1 square meters. meter, which involves the use of a group of such lamps to illuminate paths or other areas.
The lamp is powered by a voltage of 3 volts, and its power is 0,06 watts. The degree of security is IP644.
Appearance deserves special attention. The body of the product is made in the Art Nouveau style, the oval cover is made of plastic and has several colors. The fittings are in grey.
Solar Novatech 357217
The original lamp, which looks like a stem and butterflies located on it. The height of the product is 76cm, the bulb voltage is 230V, and the maximum power is 0,06W. Degree of protection IP-65.
The design is made in modern style. There are several plastic flowers on the ceiling. The fittings of a product are covered with chrome. The total number of lamps is 1.
HorozMagic 078-007-001
Ground lamp, which is equipped with a solar panel and is made in a modern style. The case is made of metal, which guarantees its resistance to mechanical stress.
One device provides illumination of 0,3 square meters. meters of area. The light source is 0,06 W LED paws.
It is worth noting that ground lamps of this model can be equipped with halogen, fluorescent, energy-saving and retro lamps.
Novotech Tile 357235
A luminaire that is built into the ground and has only one LED light bulb. The power of the light source is 0,07 W, the supply voltage is 1,2 Volts. The mass of the lamp is 100 grams, the diameter is 35 mm.
The product is made in a modern style has a level of protection against moisture and dust IP68 and the third class of electrical safety. The depth of the mortise hole is four centimeters. The kit comes with a battery.
The shade is blue and the frame is black. The product itself is made of plastic.
Paulmann Boden 93777
Another type of luminaire that is installed directly into the ground. Overall dimensions of the product – 4 * 25 in height and width. The diameter is 25 cm. It is able to illuminate 0,3 square meters. meters of area. The luminous flux is 11 lm, and the peak power of the bulb is 0,6 watts.
The product Paulmann Boden 93777 is made in Germany, equipped with additional bulbs and has a degree of moisture protection IP 67.
Externally, the product is made in the Art Nouveau style, has a transparent glass shade. The luminaire has only one shade and one bulb. Reinforcement surface type – satin. The shape of the plafond is spherical.
Paulmann Boden 93775
An option for people who prefer lamps made in a modern style. This is a great option for arranging outdoor lighting. Model dimensions are 5,1*10*20 cm.
Made using high quality glass. The illuminated area is 0,3 square meters. meters.
The luminaire uses a 0,6 W LED bulb and solar panels. If desired, the LED lamp can be replaced with a fluorescent, energy-saving or halogen light source.
Uniel USL-S-104/MT810 Lyli
Already by the name of this model, we can conclude that the forms are elegant. The product is made in the form of a lily, which will delight you with its unusual design and the ability to change colors. Height – 81 cm, battery capacity – 600 mAh.
The device is made in a plastic case and has an IP44 protection class. The operating temperature range is from 20 degrees below zero to 35 degrees Celsius.
The small dimensions of the lamp (10,5*81 cm) and the small dimensions of the solar panel (3,4*3,4 cm) make it easy to find a suitable place for the product.
The LED type is RGB and the battery is AA. The resource of the light source is at least 30 thousand hours.
The case is made in silver color, the warranty period is six months. The battery lasts up to 8 hours on one full charge.
For installation on the ground.
Novoteck Alice 357199
A modern model of a solar-powered luminaire designed to illuminate a small area on the street.
Of the features of the model, it is worth noting its compactness (dimensions are only 13 * 15 cm), a plastic case, as well as the use of economical LED lamps with a power of 0,06 W.
Like many other devices of this type, Novoteck Alice 357199 can be equipped with other types of lamps – retro, fluorescent, energy-saving or halogen.
Solar Globe 3314
Made in a classic style and has only one light bulb with a power of 0,06 W. The supply voltage is 3 volts. Overall dimensions are 205 mm wide and 298 mm high. The mass of the product is about 1,5 kg.
The frame is made in dark gray, which should be taken into account in the process of interior planning.
The plafond is made matte, made of high-quality plastic. Protection level IP44. The replacement kit includes additional bulbs and a battery that allows the device to work up to 8 hours.
Solar Globe 331
The original lamp, made in the form of a gnome with an old-style lantern. The design provides space for only one LED light bulb with a power of 0,04 W.
The supply voltage of the product is only 2 Volts. Model dimensions (length, width and height) are 190 * 148 * 290 mm, respectively. The weight of the product is 1,2 kg, and the volume is about 0,01 cubic meters. meters.
The frame is made in several colors, which must be taken into account when planning the interior or exterior.
The degree of protection against moisture and dust is IP44. The operating time on a full battery charge is 8 hours. In the kit, in addition to the battery, additional bulbs are supplied.
Solar Al 33913
Solar-powered lantern, made in a classic style and looking like a butterfly sitting on a stone.
The design provides space for one light bulb with a power of 0,06 W. The voltage of the device is 3 Volts. The protrusion is 140mm and the width is 100mm. The level of moisture and dust protection is standard for such products and is IP44. When the battery is fully charged, the sweetheart will burn up to 8 hours.
Novotech Alice 357200
Luminaire with eight LED lamps, having a height of 240 mm and a diameter of 250 mm.
The product features include a relatively large illuminated area (as for such devices), equal to 1-2 square meters. meters, the presence of a control panel, the use of impact-resistant plastic as a material and protection class IP66.
Comes with base and charger. The lamp is equipped with a Ni-Mh battery with a capacity of 200 mAh, which is charged by sunlight.
E5209
Solar-powered lamp, which is an original flower ball. This is a great option for decorating a veranda, gazebo, balcony or porch.
The advantages of the product include the original design, the presence of a long wire between the battery and the color, long battery life, a high level of moisture and dust protection, and a convenient bayonet mount.
The device includes 20 LED bulbs with illumination of 4000 K. The battery has a capacity of 600 mAh, and its charge / operation time is up to 8 hours.
Sakura Tree, PL 311
An original design element for the house and adjacent territory. This lamp does not need electricity – it runs on a battery that charges during the day and gives off energy at night.
LEDs consume a small amount of energy. At the same time, a full charge will last for 6-8 hours of glow.
The height of the device is 3,5 cm, the material is plastic, the number of LED lights is 24, and the degree of protection is IP 44. The color of the glow is white.
In the form of a stone
Approximate number of LEDs supplied with the product is 1 pc. The kit comes with a battery. The level of protection against dust and moisture IP44. Overall dimensions — 135*95*90 mm.
Suspended models.
Solar Globe 33970G
A solar-powered lamp with a modern design. This model is perfect for street lighting design.
The dimensions of the device are 37 * 25,5 * 25,5 cm. Plastic is used as the material.
The power of the LED lamps that are installed in the device is 0,07 W.
Like a number of other models, lamps of this type can be equipped not only with LED, but also with other types of lamps (retro, halogen, fluorescent and energy-saving).
Uniel USL-S-141/PT280 “Garden Star”
Model of a solar-powered pendant lamp. The features include the original appearance, reliability of the design and long service life.
The color palette contains green. The main material is plastic.
The product is made in China, has a height and diameter of 28 cm. The number of lamps is 1. The power of the light bulb and the total power is 0,06 W, and the lighting area is 3,3 square meters. meters.
The resource of the device is 30 thousand hours. The kit comes with replacement bulbs.
Engo Solar 48595
Solar powered wall lamp made using glass and metal. The color palette contains black.
The product is made in country style and can be installed on a table or other base.
The height of the device is 260 mm, and the length and width are 150 mm. The power is 0,06 W, and the illuminated area is 0,1 square meters. meter. The lamp type is LED. Quantity – 1.
Floating with placement on the water.
There is also a wide selection of interesting models at the disposal of buyers.
Solar 357215
A metal luminaire made with translucent fittings and a white glass shade.
The device has a LED light bulb in the amount of one piece and a power of 0,06 watts. Degree of protection against moisture and dust IP66.
The illuminated area is one square meter. The supply voltage is 12 volts. The diameter of the product is 80 mm. The weight of the luminaire is 335 g. Replacement bulbs are supplied.
Feron “WELL LITER” on the water
Garden figure in the shape of a water lily. This is an original solar-powered lamp that can decorate any pond.
The height of the product is 60 mm, the degree of protection against moisture and dust is IP65. The model is made in China, but has high quality and long service life.
The material used is EVA and PVC. The battery has a capacity of 600 mAh. The length of the product is 170 mm, width 17 cm.
Lawn Feron
The model is well protected from moisture, which allows you to use it on the water. The diameter is 12 cm, and the height is 7 cm. It takes about eight hours to fully charge the battery and the same amount of time the lamps can glow in the dark.
The features include the presence of a bright LED, an AA battery (included), the presence of a switch and a light sensor.
Due to the presence of the latter, the lamp turns on and off automatically.
“Dragonfly” by Feron
This model is intended for installation in the garden. It has a PL312 type LED. Installation can be carried out directly in the reservoir to decorate the relief.
At night, its glow gives the surface of the water a real magic, thanks to the multi-colored transfusion.
The luminaire is made of plastic and has a degree of protection IP65. The battery is supplied in the kit and has an AA type, the output voltage is 1,2 Volts. Charging and powering the light bulb takes up to 8 hours.
Operating conditions for stand-alone luminaires
When decorating the territory of a summer cottage, garden or country house, each owner plans to preserve the well-groomed appearance and decorative qualities of the elements as much as possible.
To extend the life of solar-powered luminaires, it is important to strictly follow the operating requirements:
- Do not scratch, hammer into the ground or throw this device. Doing so may damage the case.
- From time to time it is necessary to wipe the solar panel with a damp and clean cloth. With this approach, you can achieve greater efficiency.
- When installing the flashlight, take into account the features of its operation. If it is not intended for water bodies, it is prohibited to install it near the pond. Please note that only floating luminaires have a sufficient level of protection against moisture.
- Before the onset of cold weather, it is advisable to clean the device in a warm room. If the lamp remains in place, it is necessary to turn the switch to the “Off” position, and then remove the battery.
- Monitor the condition of the power supply and replace it if its efficiency decreases.
Solar-powered street lamps and lamps are the best solution when you need to save on electricity or there is no way to supply voltage to connect standard light sources.
An important plus of such devices is the variety of options, which allows you to choose a lamp for lighting or decorating the territory, taking into account your own preferences.