South Korean LG equipment is popular and is distinguished by new developments, modern management. Therefore, you can immediately see the errors of the LG refrigerator on the scoreboard. Each symbol for what kind of breakdown, how to find and fix it, read in our article.
Error codes for the refrigerator “ElGee”
The control board is equipped with a self-diagnosis system. It is she who displays the error code. Sometimes it can be a system failure, which can be eliminated by rebooting:
- Unplug the refrigerator.
- Connect after 10-15 minutes.
If during this time the code disappeared from the screen, then the problem is solved. If it lights up again, it’s broken. To determine exactly which node is broken, take a look at the instructions or our table:
| Error code | Which means | How to fix the problem yourself |
| FS | The temperature sensor in the freezer does not work. | There was probably a short circuit. Check sensor contacts and wiring. Replace the defective part. To prevent such problems, it is recommended to install Voltage regulator. |
| rS | Closed refrigerator compartment sensor. | The sensor is beyond repair. The element is being diagnosed and replaced. |
| dS | Freezer compartment sensor 2 does not give a signal. | No communication with sensor and control board. Contacts and connections are examined. Replacement is in progress. |
| dH | The evaporator sensor has failed. | Temperature rises in the department. You need to check the sensor and install a new part. |
| FF | The freezer fan is not working. | The fan accelerates cold air through the chamber in the No Frost system. If it is not working, then the temperature will begin to rise. The blades are checked for icing, defrosting is carried out. The engine is diagnosed, it is replaced with a serviceable one. |
| CF | The refrigerator fan is broken. | It is necessary to check, find out the cause of the failure and install serviceable elements. |
| CO | Faulty wiring between control board and information display. | The display may malfunction. Inspection of the wiring at the time of burns and insulation violations. Loop replacement. |
| dP | Throttle motor does not work. | You need to inspect, find out the cause of the problem and fix it. Probably the motor is not working. Then it is replaced. |
| Er | The freezer evaporator does not work. | There was a breakdown of one of the parts of the evaporator: sensor, timer, heater. Diagnostics, ringing of parts and assemblies are carried out. The defective element is replaced. |
Similar codes can be seen in any models, but most often in LG GR-389SQF, LG R-S392QVC, LG GR-P227ZCAW, LG GA-B489 ZVCK.
Certain indicators may also flash and light up. As soon as you notice such symbols on the display, do not delay the inspection, call the wizard or do it on your own.