Contents
Is it possible to iron a leather jacket, how to iron a jacket
How to iron a leather jacket? If the jacket has been rolled up for a long time or has been wrinkled for other reasons, of course, you cannot put it on the street in this state. What can be done to make a leather product look attractive again?
How to iron a leather jacket correctly
Can I iron a leather jacket
There are several simple ways to make your jacket straight:
1. The easiest way is to hang it on a hanger that is ideally suited to the size of the product. Thin skin will be smoothed out in 2-3 days, a jacket made of coarser material can straighten for more than a week. This method is suitable if the bruises are light.
2. Exposure of the product to steam. You can use an iron with a steam generator or a special steamer. The method is convenient in that the steam jet is directed to hard-to-reach places, folds, creases. The main thing is to remember: you need to apply hot steam to the jacket from a distance of 10-15 cm, otherwise you can ruin the product.
3. Use of nut butter. Thoroughly lubricate the entire surface with a cotton swab dipped in oil, then hang it out in an open space for several hours. It is worth repeating several times for greater efficiency. The oil can be replaced with petroleum jelly or glycerin.
It is important to know that the jacket must be cleaned of dirt before smoothing.
How to iron a leather jacket with an iron
It would seem that what could be easier – iron the jacket using a simple iron. This is undoubtedly the most efficient way. But you should be especially careful and take into account the following nuances:
1. Set minimum heat.
2. Lay the jacket on the board with the front side, it is possible with the wrong side, however, the lining may interfere with the smoothing process.
3. Be sure to use wrapping paper or a smooth cloth through which to iron the leather. The main thing is to make sure that the surface of the iron does not come into contact with the leather surface.
4. Disconnect par.
5. Using light pressure, run the iron over each wrinkled area separately. After cooling down, move on to the next one.
6. After ironing, the jacket should be hung on a hanger and allowed to cool completely.
Ironing is not suitable for items with an embossed pattern or lettering, as well as pressed and very thin leather.
Provide proper care to the jacket, then you do not have to resort to ironing. Hang on a hanger in a closet, rather than storing it folded on a shelf. Leave enough space around the jacket so that things don’t squeeze it, and use the appropriate hanger size. Then the leather product will delight you with its beautiful appearance for a long time.