Contents
*Overview of the best according to the editors of Healthy Food Near Me. About selection criteria. This material is subjective, is not an advertisement and does not serve as a guide to the purchase. Before buying, you need to consult with a specialist.
Plastic is a durable material that easily survives most cleaning products. However, after some of them, ugly stains remain. Therefore, in this material we will tell you how to wash plastic panels in order to restore their natural shine.
The subtleties of washing plastic panels in the kitchen and bathroom
Plastic panels in the kitchen and bathroom are best washed using special products. This is due to the nature of the contamination of such coatings.
On the panels in the kitchen, a layer of volatile old fat forms. And no matter where exactly these coatings are located – on the walls or ceiling. It is better to remove old fat with special means – they will help not only to quickly get rid of it, but also to return the panels to their former attractive appearance.
A soap-lime layer forms on the panels in the bathroom. It appears due to the steam that condenses on the walls and ceiling. After the water with the dissolved detergent dries, it becomes extremely difficult to remove. Soap-limescale can be removed with acidic agents (vinegar, citric acid, Coca-Cola – it contains phosphoric acid) or simply with a special tool.
Home and folk remedies for washing plastic panels
If you do not want to use special household chemicals, then you can turn to folk remedies. They will be effective in most cases.
Suitable for cleaning plastic panels:
Laundry soap. Copes with dirt on ceiling and decorative panels, does not leave streaks (usually). Half a bar of laundry soap must be grated on a coarse grater and dissolved in 5 liters of warm water. Dip a cloth in the mixture and wipe the surface. For ceilings, you can use a mop. Then – wash again, only with clean water. This is necessary to remove soap residue;
Baking soda. Suitable for removing small spot dirt and stains. Mix baking soda with a little warm water to create a semi-liquid “slurry”. Apply it to the stain. Leave for 1-2 hours. Remove the paste with a wet sponge without pressure. Wipe with a damp cloth. Baking soda is abrasive and should not be rubbed.
Table Vinegar. It will cope well with mineral pollution – for example, in the bathroom. Work with gloves, ensure good ventilation of the room. Vinegar and warm water are mixed in a 1:1 ratio. A cloth is dipped in the solution, which is then wiped over the panels. After that, you can wash them again with clean water to get rid of the pungent smell of vinegar;
Chlorine bleach. Removes stubborn dirt. Especially effective on white surfaces (for obvious reasons). Wear gloves, in a well-ventilated area. For 5 liters of warm water – 1 cap (about 50 ml) of bleach. A rag is wetted in the solution. It wipes the surface of the plastic panel. It is recommended to make measured, smooth, sweeping movements;
Ammonia. A universal solvent that works well on almost any dirt and adds shine to laminated panels. Carry out work with gloves, in a well-ventilated area. Mix 5 tablespoons of ammonia and 5 liters of water. Wipe the panels with the solution. Without waiting for drying, wipe them dry with another cloth.
Vodka or alcohol. Also a good solvent, which will be effective for everyday cleaning, and if children with felt-tip pens got to the plastic panels. Mix vodka or alcohol with clean warm water in a ratio of 1:3. Wipe the surface with this solution. Then rinse again with clean water.
In addition, a clean melamine sponge is suitable for cleaning plastic panels. This tool works by itself and does not need additional household chemicals. It is enough just to wipe with a melamine sponge – and that’s it, most of the dirt will be removed from them.
Laminated plastic panels can be washed with ordinary glass cleaner. The algorithm of actions is the same. Apply glass cleaner with a spray bottle to the plastic panel, and then wipe with a dry cloth, tissue or rag.
How to maintain a vibrant color and protect against plaque on plastic panels
Plastic panels should be washed at least once a week, and ideally at every cleaning (if it happens more often). For everyday cleaning, a regular mixture of household cleaner – for example, dishwashing detergent – with warm water is suitable.
Thoroughly wipe the plastic panels with this mixture. If they have a glossy surface, then, without waiting for drying, wipe them again with a dry cloth or napkin. This will help avoid divorce.
Attention! This material is subjective, is not an advertisement and does not serve as a guide to the purchase. Before buying, you need to consult with a specialist.