How to wash beret wash with rhinestones, tips

The information on the label will tell you how to properly care for the purchased item. Be sure to check the manufacturer’s recommendations before washing. Your beret may not be wet at all. A similar rule applies, for example, to fur, leather, suede products: they are handed over to dry cleaning.

If the hat can be washed, it must be done with care.

As a detergent, it is better to take a gel for delicate fabrics (wool and silk) or shampoo.

1. The water temperature should not exceed 30 degrees.
2. Do not allow strong temperature changes, otherwise the beret will decrease in size.
3. During the washing process, the item must not be pulled, rubbed or twisted.
4. They take a take out of the water with both hands, squeezing it in a lump.
5. If necessary, squeeze lightly, like a sponge.
6. To prevent the product from deforming, it is dried in the unfolded state.

Unpretentious hats made of thick yarn can be machine washed by selecting the “wool” mode. The optimum temperature for the procedure is 30 degrees, the number of revolutions during spinning is 600. Liquid detergent for woolen items is poured into the tray of the washing machine. To keep the beret soft and smell pleasant after washing, it is advisable to use fabric softener.

Only with your hands. Do not machine wash products made of down, felt, thin cotton yarn.

1. First, the beret is soaked in warm soapy water.
2. After 5-10 minutes, the item is taken out of the basin, placed in the sink, and allowed to drain.
3. The procedure is repeated several times, changing the water.
4. When the liquid drains for the last time, the take is transferred to a spread terry towel.
5. The product, including the decorative elements, is carefully straightened.
6. Cover the top with another towel.
7. To remove excess water, the resulting “cake” can be rolled into a roll, and after a while unfold and replace the towels.
8. Without waiting for the hat to dry completely, give it a shape.

One option is to pull the beret onto a plate. The best way to both dry and smooth the thing can be a tourniquet from a waffle towel. It is placed inside the product, distributed around the circumference.