Contents
Capital construction implies a thorough finishing of the premises, not only inside, but also outside. Therefore, it is important to decide in advance how to sheathe the gazebo. In most cases, the choice of materials depends on their strength, flexibility and weather resistance.
Finishing features
More than 40% of the heat escapes through the windows, and the same amount is absorbed by poorly insulated ceilings, roofs and walls. It is unrealistic to spend the winter in such a structure, so we advise you to sheathe the gazebo with a block house or polycarbonate before the cold weather. Impact-resistant materials withstand temperature fluctuations well, do not warp, maintain an optimal level of humidity in the premises.
This is important not only for people, but also for the active development of indoor plants, a third of which wither when the air dryness exceeds 22%. Hard surfaces of the building can be finished wet or dry. In the first case, it will be necessary to level the walls with plaster, and in the second, dust-free sheathing with sheet materials. In the conditions of a small-sized room, it is better to attach them to the walls, and not to the frame. Otherwise, the already small area of u2bu3bthe gazebo will “lose weight” by XNUMX–XNUMX cm.
Construction scissors, glue, a spatula, a special sickle tape, a primer and self-tapping screws are useful in the work. Exterior decoration of gazebos involves the use of a hinged or ventilated facade. The advantages of this technology builders include:
- quick installation by hand in any weather;
- high-strength coatings withstand mechanical stress, exposure to moisture and ultraviolet;
- unlimited choice of materials, due to which any design solution can be successfully implemented;
- placement of electrical wiring and a layer of thermal insulation directly under the skin.
Wood for finishing work should be stored in a warehouse. If this is not possible, you will have to make a canopy for lumber that is most susceptible to cracking and rotting.
Video “Decorating a gazebo with a crate”
From this video you will learn how to decorate the gazebo with a crate with your own hands.
Materials
In choosing panels for the interior cladding of structures in the country, the first thing to do is to assess their level of flammability. For example, ondulin ignites much faster than cellular polycarbonate. And natural stone does not form smoke at all, which is especially important for the safe use of gazebos with barbecues.
Non-combustible products belong to the KMO class. This includes most concrete mixes, glass, asbestos cement and bricks. Materials with organic components in the composition contribute to quick installation, but at the same time can cause a fire. Therefore, it is better to choose multilayer panels covered with a heat-resistant film.
Siding
On the sides of the gazebo it is better to sheathe metal siding. Due to the polymer processing of materials even at the stage of their production, such a finish does not rot, it withstands heat and frost well.
If the owners need high-quality soundproofing of the premises, it is more logical to choose cement siding. It absorbs noise better, does not ignite and retains its original shape at any temperature. Acrylic panels show greater resistance to aggressive environments, and light sheets of polyvinyl chloride contribute to the natural ventilation of external surfaces.
Before installation, it is important to prepare a solid frame of rails. So that the material does not deteriorate under a layer of vapor barrier and the skin itself, it should be impregnated with antiseptics.
Profiled sheeting
The choice of refractory sheets often depends on the height of the corrugation and the shapes of the products. For interior decoration, materials with a minimum thickness of 2–4 mm are suitable. If you need to sheathe a round gazebo with a domed roof, you will definitely need dense sheets 8–12 mm thick. For outdoor work, products of the C21 brand with a higher corrugation height are suitable. The choice of colors depends on the ability of the color to visually expand the space, mask scratches and dirt.
In the latter case, it is more profitable to choose brown and gray sheets, and light materials to expand the internal space. The quality of installation largely depends on the correct processing of corrugated board, so do not forget:
- Dense sheets with a thickness of 55–70 mm cannot be cut with a jigsaw. To prevent the metal from deforming, it is recommended to use a circular saw for this purpose.
- The nibbler handles tight turns better. As a result, the incision site always comes out even, and the edges never bend.
- Using a jigsaw, you can improve the shape of the sheet. To increase the resistance of the cut material to corrosion, the edges of the cuts will have to be treated with protective compounds.
Metal grid
If the work needs to be completed in the shortest possible time, it is better to use a plastic mesh. It is attached to the walls with cement mortar. Fasteners are not needed here. When sheathing a structure from the street, it is more logical to use a metal base suitable for reliable fixation of the plaster layer and strengthening the outer surfaces as a whole.
Walls made of adobe are supposed to be sheathed with chain-link, with the help of which it is really possible to create a high-strength reinforcing layer. Welded mesh is an advantageous option for finishing load-bearing structures. There is no load on the supports here, so we can safely talk about the long-term use of summer extensions. Unlike the chain-link, the welded mesh does not sag, and if processed in time with polymers, it does not deteriorate under the influence of increased moisture.
Block house
Externally, planed boards resemble logs. Their fixation by the thorn-groove method contributes to high-quality lining of internal surfaces without gaps and cracks. The optimal thickness of the materials is 25 mm, and the width is from 120 mm and above. Before use, a wooden block house is treated with stain, which increases the resistance of products to moisture. Unlike conventional enamel compositions, it penetrates into the deep layers of wood without disturbing the natural texture of the products.
For outdoor work, metal panels that are resistant to temperature extremes and aggressive environments are more suitable.
wooden lattice
If lumber is available, raw materials can be made at home. Inclined slats, located crosswise, are ideal for decorating gazebos without blank walls. In summer, such structures always remain cool, and the smoke from the barbecue comes out.
For self-assembly of the structure, you will need slats, bars, scissors, nails and varnish. The tree should be treated with protective compounds before and after the frame sheathing. The same lattice can be installed on the roof of the gazebo. This is a good base for climbing plants.
Polycarbonate
Instead of silicate glass, which creates a greenhouse effect indoors, experts recommend polycarbonate. Monolithic sheets are suitable for finishing any premises. Light honeycombs are the best option for building canopies and arched structures. Volumetric buildings are recommended to be sheathed with dense sheets with a thickness of at least 12 mm. In this case, the material lends itself well to processing, does not deform and does not bend in the wind.
To seal the ends of the products, you will definitely need aluminum profiles. If you use smooth sheets, you will additionally have to make drain holes.
Batten
Products of class “Extra” – the best option for interior and exterior decoration of buildings. Materials without a single knot and resin pocket are characterized by a perfectly flat surface, which, in turn, facilitates installation. Sheathing boards are installed with the groove down so that the products do not pick up moisture. You will need clamps to secure the top edge. Slots can be sealed with slats.
Indoors, only wooden lining can be used. Unlike plastic, it retains heat better, and does not emit toxic substances when heated. Priming compositions contribute to the rapid adhesion of materials. Flame retardants increase the resistance of boards to fire.
A simple do-it-yourself sheathing option
The first step is to prepare the crate for mounting the lining. Given that wooden buildings settle over time, you need to leave a small gap between the ceiling and the floor. Self-tapping screws are needed to fasten the boards. In this case, the screw heads should hide in the wood. The resulting holes can be masked with putty.
With a minimum thickness of lining, it is better to use invisible clamps. The first and last skin elements are fastened with screws. At the end of the work, the walls are varnished.