Contents
*Overview of the best according to the editors of Healthy Food Near Me. About selection criteria. This material is subjective, is not an advertisement and does not serve as a guide to the purchase. Before buying, you need to consult with a specialist.
Ammonia, when used correctly, can bring to life not only a person, but also his favorite things, and even interior items. It would seem that a simple solution of ammonia in water, but what effect. Our editors have compiled the safest and most effective ways to use ammonia to remove stains.
Removing stains from clothes
Fat traces
Method No. 1. Fresh. Finely grate laundry soap, add to it an equal amount of ammonia and 2 times more turpentine. Move carefully. Apply the finished composition on a greasy trace, leave for a few minutes. Rinse afterwards with warm water.
Method No. 2. Old. An effective combination of ammonia (10%), salt and water (ratio 1:1:3) is suitable for removing stains that have eaten into the fabric. Apply the finished composition liberally to the stain, let it dry. Then send the item to the laundry.
Method No. 3. Grease stains on silk. Silk is a rather finicky material, so the product used should be more gentle. Prepare a mixture of glycerin, water and ammonia (1: 1: 0,5.) Soak the stained area in the resulting solution for 10-15 minutes. Rinse under running warm water.
Milk/ice cream
Method No. 1. To remove fresh stains, you can use a mild soap solution with ammonia (the ratio of soap, ammonia and water is 1:1:6). It is enough to wash the fabric in this composition, and then rinse thoroughly in clean water.
Method No. 2. To remove old contaminants, ammonia is used in combination with glycerin. Mix equal amounts of ammonia (10%), water and glycerin. Wet the dirty area of u8bu10bthe material with the resulting mixture. Leave for XNUMX-XNUMX minutes. Then send to the washing machine.
If the fabric is colored, there should be less ammonia: mix 2 tbsp. tablespoons of glycerin and water, add 5 drops of ammonia solution there. Next, put the product between two pieces of a clean cloth and iron it with an iron. Wash the thing in a convenient mode.
Alcohol
Method No. 1. Effective against beer. A fresh stain can be removed with a slightly warmed ammonia solution. Gently treat the dirty area with a warm composition. Wash the product with soap and warm water. The old stain is removed with an ammonia-glycerin mixture (ratio 1:1). Treat the beer trail with the resulting composition. Then wash the thing in any convenient way.
Сtool #2. Effective against white wine. Ammonia + turpentine + white soap. Mix the components in a ratio of 1:2:10. Using a cotton swab, apply the mixture. Leave somewhere for 30 minutes. After washing the treated area in warm soapy water, then in clean cold water.
Method No. 3. Effective against red wine. A fresh stain can be sprinkled with dry table salt. If it is already dried up, then slightly soak the salt with water to make a slurry. After 5 minutes, apply a paper towel to absorb the remaining moisture. Rinse immediately in cold water with the addition of ammonia (proportion – 1 teaspoon of ammonia is needed for 1 water).
Grass
Traces of grass – one of the most difficult to remove. But they can be removed if urgent action is taken.
Method No. 1. ammonia + water + hydrogen peroxide. The ratio of components is 1:1:0,1. Moisten the trace of the grass with the prepared solution. Leave for 5 minutes. Rinse thoroughly in cold water.
Method No. 2. Soap solution + ammonia. Mix the components in a ratio of 1 teaspoon of ammonia to 1 tbsp. solution. Wash the stain in the resulting composition. Rinse thoroughly.
Method No. 3. Hydrogen peroxide + ammonia. For white things. Take the components in equal quantities. Apply locally to the stain. Leave for 5-10 minutes. Send the item to the laundry.
Cosmetics
The foundation can be removed by wetting it with an ammonia solution and sprinkling with baking soda. Leave to act for 5-10 minutes. Then rinse in warm water.
Lipstick and mascara are easy to remove with a clean ammonia solution (be sure to rinse afterwards with warm clean water).
The trace of perfume is removed in the following way: apply ammonia, after 3-5 minutes – a solution of hydrosulfite (1 g of the substance per 4 tbsp. Water). After another couple of minutes, walk with a solution of oxalic acid (for 1 tbsp. Water 5 g of the substance).
Iodine
An aqueous solution of ammonia easily copes with such stains. It is enough to apply the prepared composition (1 tbsp of water + 1/2 tsp of ammonia) to the stain and leave to act. When the trace is washed out, wash the item in warm water with the addition of liquid soap.
Resin
A trace of asphalt resin, gasoline is easily removed with a simple composition. To prepare it, you need to mix 1 teaspoon of potato starch with a few drops of ammonia and hydrogen peroxide. Apply the resulting thick mixture in a dense layer on the stain, let it dry completely. Then carefully remove the material from the surface with a soft clothes brush. Repeat the process if necessary. Rinse thoroughly in cold water afterwards.
Tea, coffee, cocoa
Such spots are considered to be pollution of medium complexity. They can be easily dealt with using one of the methods described below.
Method No. 1. Ammonium chloride + glycerin. Mix both components in a ratio of 1:4. Apply the composition with a cotton swab. Leave for a certain time until the trace disappears. Then rinse in cold water.
Method No. 2. Ammonia + soda. Add to water (1 l) 1 teaspoon of ammonia solution and the same amount of soda ash. Rinse the stain thoroughly with the resulting liquid. Leave for 5-10 minutes if necessary. Then rinse first in warm, then in cold water, adding a little vinegar there.
Method No. 3. Ammonium chloride + water. Dilute ammonia in water (ratio 1:1). Using a cotton swab, thoroughly blot the stain with this composition. Let dry. Wash off with running water.
Fruits, vegetables, berries
To remove currant stains, a mixture of ammonia and peroxide is suitable. Mix them in equal proportions, apply and leave for a while. Then rinse under cold running water.
Pure ammonia is used to remove stains from cherries, cherries, lingonberries. Dot the composition on the dirty area and leave for 3-4 hours. Then wash in a convenient way.
Separately, it is worth mentioning the juice from red cabbage and beets. It is believed that such stains on white woolen things are a real disaster, since they do not wash off. Ammonia will solve the problem: it is enough to treat the contaminated area first with 5%, then with 2% ammonia solution. Then rinse thoroughly in cold water.
faded footprints
Ammonia will help here too. To remove faded stains from clothes, an aqueous ammonia solution is suitable: add a whole vial of ammonia to hot water (fill up a medium-sized basin). Soak the product in this water for 15-20 minutes. Rinse thoroughly with clean water several times.
Sweat stains
Ammonia is a great way to remove sweat stains from white fabrics. Dilute in 1 tbsp. water, 1 teaspoon of salt and ammonia solution. Dip the contaminated area in the resulting mixture and leave it for 2-4 hours. Then rinse thoroughly.
blood stains
Ammonia can only remove fresh traces of blood. But before using it, it is important to thoroughly rinse the dirty area under running cold water. Then mix 2 tbsp. spoons of ammonia with 1 tbsp. water. Soak the blood stain in the resulting solution for 1 hour. After sending to the washing machine.
mold spots
If the thing is damp and mold spots appear on it, do not rush to send it to the trash can. The product will help to “reanimate” boiling in an ammonia-salt solution. It is necessary to add to the water (based on 1 liter) 5 ml of ammonia and 2 tbsp. spoons of salt. Put on a slow fire and boil for half an hour. Let cool slightly. Treat the contaminated area with the finished composition, leave for some time to interact. Then wash in a convenient way and dry in a ventilated place or in the fresh air.
Treatment of various surfaces
Furniture
Ammonia is great for updating wooden furniture pieces. This tool is especially effective when processing old furniture made of durable wood species such as oak or walnut. It is enough to moisten a cotton napkin in a 12% ammonia solution and carefully walk over the surface of the product. It will take on a beautiful brownish-gray hue.
Ceramic tile
Ammonia, or rather, an aqueous solution of ammonia, qualitatively cleans various contaminants from the tiled surface. Plus, it does a great job of eliminating bad odors.
Painted window frames and walls
Ammonia solution effectively cleans light-colored walls and window frames. Dilute 1 teaspoons of ammonia in 2 liter of water and thoroughly wipe the painted surface. If the contamination is too persistent, the dose of the active substance can be increased by 5 times.
Wooden floors
Ammonia will help remove stubborn stains and give a gloss to wood flooring. For 8-10 liters of water for mopping, 8-15 tablespoons of ammonia are enough. With the resulting composition, walk on the floors previously washed with water or detergent. The effect will be amazing!
Attention! This material is subjective, is not an advertisement and does not serve as a guide to the purchase. Before buying, you need to consult with a specialist.