How to quickly peel pitted cherries: folk and special devices

Experienced housewives know many ways to get the pits out of cherries. This technique is necessary at the time of processing the berries before preparing certain dishes – jam, frost, preparations for pies or dumplings. It is difficult to get the bones from frozen cherries, so it is better to do this in advance. To make the procedure productive and less tiring, they use simple devices that can be found in every home. At the same time, the cherry is not deformed, and the juice does not flow out. Of course, the degree of accuracy at home depends on the skill of the performer and the quality of the instrument.

Pitted cherries can be given to children without fear

Features of removing cherry pits

When performing manipulations with cherry pits, some features of the procedure should be taken into account:

1. Any device can deform the berry, which will lead to a loss of juice or an unaesthetic appearance of the workpiece. The degree of loss or damage depends on the professionalism of the culinary specialist, as well as on the competent choice of the tool.
2. If you store cherries with drupes for a long time, there is a danger of accumulation of toxins that are released from them. The longer the shelf life, the more contamination. Therefore, any method of removal is always better than processing cherries with a stone.
3. It is important to choose the right device in accordance with the volume of berries, the availability of time and the skill of the hostess. This will save not only valuable time, but also energy.
4. Almost any option results in staining of the fingers. After finishing work, they will have to be washed thoroughly. To avoid this, it is better to use disposable or rubber gloves.

In addition, you need to know the basic techniques for removing cherry pits in order to choose the best solution.

How to quickly remove pits from cherries in folk ways

If we group the methods for removing seeds from cherries, then several categories can be distinguished:

1. manual manipulation. This group includes all options with the use of improvised means – pins, hairpins, sticks.
2. Semi-mechanical. Such actions involve the use of devices in which the berries are inserted one at a time, and then the bone is pushed out.
3. Mechanical. This includes all devices using levers, containers or other tools.
4. Electrical. This category includes appliances that are connected to the mains.

Folk methods will help to clear cherries from seeds without buying special devices.

Sometimes the most unexpected items turn out to be useful in the process of processing berries.

Their main advantages are:

• budget;
• availability;
• sustainability;
• ease of execution;
• efficiency.

The first two categories can be safely attributed to folk methods.

How to get pits from cherries with a garlic press

For the procedure, you will need a press, which is used to grind garlic cloves. On the handles of the fixture must be a hole and a pin. One detail on one handle, the other on the second. The arrangement of parts corresponds to each other. If the handles are connected, then the pin fits exactly into the hole.

It turns out that the garlic press has another useful function.

To remove the drupe from a cherry, you should insert the berry into the hole, pressing from above with the other handle. The pin will easily push the bone out

Before using the garlic press, you need to check the end of the protruding part of the press (pin). If it is very sharp, then the seed may come off it, and the berry will be crushed. The way out of this situation is to reduce the sharpness of sharpening. The end of the rod is slightly ground with a convenient tool, for example, a needle file.

How to remove the pits from cherries with a hairpin, pin or paper clip

These are simple devices that any hostess has. They can be a very handy device when removing cherry seeds. At the time of their use, the loss of juice is always minimal, because the thickness of the pin or paper clip is small.

An ordinary pin can be found in any home

How to use the device:

1. A hairpin or pin must be inserted into the berry at the place where the petiole grows. The hairpin is inserted from the side of the arc, the pin is inserted with the opposite end from the fastener.
2. Grab a bone. Pull out with a tool, using it as a hook.

Similar option:

• easy to use;
• juice from the berries almost does not flow;
• affordable and affordable.

This method is suitable for small crops. If the hostess needs to process not a couple of kilograms, but a bucket of cherries, then it is better to choose a tool with greater productivity.

However, you can’t keep your hands clean. The second disadvantage of the method is low productivity. Visual instruction:

How to quickly remove pits from cherries with a teaspoon

There are cases when the devices listed above are simply not at hand. Then the hostess will be helped by an ordinary teaspoon, or rather, one part of the spoon – a pen.

The end of the handle must be inserted into the berry from the side of the stalk attachment, lightly press on the bone and pull the seed up. The first copies are always given with a little difficulty, and then the skill is acquired. The speed and quality of work is increasing.

Choose a spoon with a thin handle for work

It will not be superfluous to use gloves and a kitchen apron.

How to quickly remove the pits from a cherry with a sushi stick

This is a very economical way to remove kernels from a berry, because you can stock up on such sticks at no additional cost. The stick must be inserted through the hole in the berry, carefully squeeze the bone to the opposite side.

The stick does not deform the berry at all

An alternative would be a barbecue skewer. It is longer, so it is more convenient to use it halfway, breaking the stick into 2 parts.

How to get a stone from a cherry with tweezers

Tweezers or tweezers can also be a handy tool when removing cherry kernels. The sharp ends of the tool easily pierce the pulp of the berry. Then it remains only to grab the bone and pull it out. The advantage of this option is the safety of cherries. The berry is not deformed at all. The only disadvantage of the method is that some housewives consider it time-consuming.

When using tweezers, you need to work very carefully

But this is a matter of skill. If you get the hang of it, the process is very fast.

How to pit cherries with a cocktail straw

Any rod is the best way for felt cherries. It has smaller berries that are difficult to work with with another tool. The execution algorithm is very simple:

1. Pierce the cherries with a cocktail tube from the side of the stalk attachment.
2. Stretch the berry along the tube so that the core remains inside the straw.

In addition to a cocktail tube, you can use any other straw or container with a hole.

The straw is suitable for peeling a small amount of cherries

The main thing is that the tool is rigid, for example, made of thick polypropylene.

To prevent this from happening, you can improve the process. To do this, take a jar or bucket for mayonnaise with a plastic lid. Make a hole in the lid to put the berries in. It should be of such a diameter that the cherry does not fall into the jar. Then press the tube on top of the fruit and push the bone into the container.

If you could not find a suitable tube, then you can take a ballpoint pen without a rod. Wash thoroughly, use in the same way.

How to take the pit out of a cherry with a fork

Every housewife has cutlery. Therefore, not only a teaspoon, but also an ordinary fork is often used to remove seeds. Only the fork will have to be modernized a bit, and it will no longer be useful on the dining table. It is worth highlighting one device for working with cherries and leaving it for such manipulations in the future.

You will need ordinary pliers or hard tongs. Remove the two extreme prongs of the fork, bend the ends of the two remaining middle ones. Now you can get started.

Insert the bent part of the teeth into the berry, pick up the bone, pull it out.

With this method, as with the others listed above, the cherry has to be pinched with your fingers. The only exception is the technique using a garlic press. Therefore, it will not be possible to completely avoid the deformation of the berry. It is important for folk improvised means to choose varieties with good density.

How to separate pits from cherries with a bottle

This method can be called the most popular. It has several positive differences from the above:

• high speed of execution;
• simplicity of technology;
• cleanliness of hands

The bottle is recommended to be used by many housewives who do not use mechanical devices.

The bottle is an economical and convenient tool

In addition to it, you will need piercing tools – cocktail tubes, sushi sticks, barbecue skewers, an ordinary stick with a pointed end. The process is quite simple to follow:

1. Wash a bottle of cola or wine.
2. Put on the table.
3. Put a cherry on the neck.
4. Pierce with a stick in the middle of the berry.
5. Leave the bones in the bottle.

Hands remain as clean as possible, bones can be removed after filling the bottle. The process moves quickly, the berries are not deformed. You can cook more than one workplace and remove cherry pits along with home ones.

Special devices for removing pits from cherries

Bone squeezers are designed to facilitate the work of a housewife. They work on the same principle. The equipment of the device must have a rod made of metal or plastic. The end of the rod can be blunt or sharp. The main thing is that it hits the center of the cherry and squeezes the stone out through a special hole. Some devices are equipped with containers for collecting drupes and peeled cherries. The advantages of such machines over manual methods:

1. There is no staining of hands with berry juice.
2. A large number of cherries are loaded into the tray.
3. The device for removing pits from cherries necessarily has details that ensure its stability – legs, suction cups.
4. Good performance indicator.
5. Easy to use, even children can use the machine.
6. Easy to care for and wash, fixtures are easy to disassemble and assemble.

Before choosing a device, you need to familiarize yourself with the possible disadvantages:

1. Some models are not designed for high-capacity cradles, so it may not be easy to achieve high performance.
2. Most often, devices for removing pits from cherries do not cope well with small berries.
3. Any device requires skill and skill.

There are types of devices that are most popular.

Crusher in the form of a pistol

This device is made of plastic with a high degree of strength. The model excludes any sharp details, including blades. Equipped with a point extrusion mechanism. After laying the cherry, you need to press the “trigger”. The stone will fall, and the berry should be carefully removed from the device. Compared to manual types of cherry pit removers, the performance of the gun is higher. In addition, there are several other advantages:

• no damage to the cherry;
• low cost of the machine;
• small size and weight;
• easy maintenance, easy to clean.

In addition to convenience, such a tool looks very aesthetically pleasing.

Among the minuses, it is worth noting the impossibility of loading several berries at the same time. Although this increases visual control.

plastic separator

This cherry pit separator can work with six berries at once. This significantly reduces the processing time of the crop. The container has 6 recesses with holes at the bottom for pushing the bones. Juice also flows into this container. Opposite the recesses there are 6 rods with serrated ends. When the lid is lowered, they push the kernels. The value of the separator is that you can work with several berries at the same time, and the juice flows into the container.

Even children can use this device.

electric car

The best option when working with a large volume of cherries. Raw materials are poured into the chute, then distributed in one row and fed to the drum. The movement of the drum and ejector rods is synchronized. At the moment of moving the berries, the rods descend and push out the kernels. Distinctive characteristics:

• high price compared to mechanical devices;
• more metal parts;
• good performance.

Electrical equipment is rarely used at home, but it is very advisable to purchase it for a family business.

If you need to process a large number of berries, then the appliance can be called the best tool.

Useful Tips

Experienced housewives always have several recommendations that will help you choose and apply the method of removing cherry pits correctly:

1. If there was no crusher for cherry pits at hand, then the ability to prepare berry puree will come to the rescue. Slightly scrolling the cherry in a chopper or blender, wipe the mass through a colander. The bones will separate from the pulp. The disadvantage of the method is that the cherry does not remain intact.
2. If the removal of bones is rare, then you should not take an expensive machine. You can handle it with improvised means or purchase a crush gun. For medium volumes, you will need a device with a container to speed up the process.

In order for cherry preparations to please the home, it is impossible to leave the kernels in the berries.

Conclusion

There are many ways to get the pits out of cherries. The main thing is that the chosen option suits its parameters and characteristics. Given the advantages and disadvantages of each technique, the housewives use the most suitable for a particular case.

Cherry pitting reviews

Before choosing a cherry pit remover, you should read the reviews. They will help to evaluate the pros and cons of a particular device.