How to properly hang a carpet on the wall

If the carpet has an impressive weight and size, the area that it will cover is large enough, and you don’t want to spoil the wall with additional holes, it is worth fixing the dowels into the seam between the wall and the ceiling. Given the weight of the product, it is better to play it safe and make at least four fasteners.

Screw the wooden plank with the screws. It should match the length of the carpet.

We retreat 2 cm from the upper edge of the carpet, sew rings as often as possible. If the distance between them is more than 5 cm, the carpet will sag.

With the same sequence, we nail the nails to the bar.

For convenience, you need to roll the carpet into a roll, freeing the edge with rings. For this event, you will need outside help to hold the carpet.

We consistently put rings on the studs, the work is over.

When the carpet is small, you will have to punch holes in the wall. Given the smaller size and weight of the carpet, you can limit yourself to three holes.

The second method of fastening differs from the first in the absence of rings. In this case, you can stretch the wire through the stitches previously sewn with fishing line, 2-5 cm from the upper edge of the carpet. A wire is hooked onto frequently stuffed nails. There will definitely not be any sagging in this case.