How to dissolve glue
If glue spots appear on your clothes, then you shouldn’t worry too much. If you know how and with what you can dissolve the glue, tidying up your favorite thing will not be difficult. After all, the means necessary for removing stains are almost always at hand.
How to dissolve glue: basic methods
The choice of method is influenced by the type of glue from which the stain was detected.
By knowing how to dissolve glue, you can save your favorite thing.
- It is advisable to remove marks from clerical and wallpaper glue immediately, before they have time to dry. They are water-soluble and are removed during normal washing.
- A fresh silicate glue stain is removed as follows. It is necessary to prepare a soapy solution and add two tablespoons of baking soda to it. Soak the clothes in the composition for a couple of hours. Then brush the soaked dirt with a brush and wash the thing in the usual way. First, scrape off the old stain with the blunt side of a knife, and then remove the remnants with acetone.
- The consequences of tissue contact with PVA are eliminated with vinegar or alcohol. Treat the soiled place with one of the selected substances, and then soak the thing for a couple of hours and wash.
- Paste stains are easy to remove. The stained area should be lathered and left for several hours. Then wash as usual.
- To dissolve the Moment glue, you need acetone. You need to moisten a cotton swab in it and treat the stain. If you need to clean a capricious fabric – silk, velvet or wool, then you need to use citric acid gruel. For cooking, you need to take 100 grams of acid per 20 ml of liquid. If one treatment did not help, then it can be repeated. But first it is necessary to check the reaction of the fabric: it may discolor.
- Moment glue can be frozen. Place the soiled item in the freezer and let the stain freeze. This will turn the glue into powder and can be removed. Clean the remaining stain with ammonia and then wash the item in the usual way.
- Silicone glue can also be frozen. A polyurethane foam remover is used to remove dirt. Vegetable oil works well. They need to treat the surface of the stain and leave it on for a few minutes. The silicone will dissolve and can be removed.
- Acetone is required to dissolve the superglue. First, you need to check the reaction of the tissue. If the color changes, then the solvent can be replaced with an aqueous solution of vinegar: 1 tbsp is taken in a glass of water. l.
If necessary, you can use special glue removers. Typically, adhesive manufacturers also offer removal solvents.