Contents
How to clean urinary stones from the toilet
Irregular cleaning of plumbing and untimely pressing of the drain button on the tank eventually render the product inoperative. Often times, owners will notice that the toilet is clogged with a stone. Such deposits do not occur overnight. The reason for their appearance can be mineral salts found in human urine. Also, too hard water can provoke limescale. How to get rid of stubborn dirt?
Not sure how to clean urinary stones from the toilet? Use special tools
How to quickly clear urinary stones from the toilet?
Cleanliness is a guarantee not only of health, but also of comfort. To keep the toilet clean, do not neglect regular cleaning (at least once a month). It will make it easy to deal with dirt.
You need to treat your plumbing with care. Many housewives pour hot water into the toilet, forgetting that microcracks appear on the faience in such cases. It is in them that plaque begins to settle in the first place. Improper cleaning products can also damage the product. In no case should the plumbing be cleaned with metal brushes that scratch the surface.
Before you start cleaning the toilet, you need to remove the water from it. For this, you can use a regular plunger. A dry surface treatment will be much more effective, as in this case the water will not wash off active chemicals.
How to clean the limestone in the toilet?
The choice of product depends on the degree of soiling. With fairly dense deposits, the following will help:
· lemon acid. Two sachets will be enough, which must be poured into the toilet and wait about 3 hours until the plaque dissolves. Then simply remove it with warm water and a brush. Experience suggests that the procedure has to be repeated two or three times;
· “Whiteness”. A common remedy that is best added periodically, as the liquid solution runs off. You can leave the plumbing all night, and finish cleaning in the afternoon;
· “Coca Cola”. The food product will also help in cleaning the toilet. Two bottles of the drink do an excellent job of removing dirt;
· Vinegar. It must be heated to a temperature of +40 degrees. Add soda and iodine. Pour this mixture into the toilet and leave for a while. If you are not satisfied with the result, you will have to repeat the procedure.
In severe cases, electrolyte (battery fluid) can be used. True, to work with it you will need not only gloves, but also a respirator with goggles. But here one caveat must be taken into account: if plastic pipes are installed, then the electrolyte will not work in any case.
Don’t let your plumbing get bloated, as keeping it clean isn’t too difficult.