Contents
How to clean the walls in a bath from soot
A real Russian bathhouse is loved by almost all people. However, in addition to its direct function, it should also look neat. What is impossible to achieve if she has sooty walls and ceiling. It is very important to clean the soot and soot in time in order to avoid its deep penetration into the wood of the walls. But how to clean the walls in the bath from soot on your own? After all, it would seem that it is not so easy to remove soot from a tree.
How to clean the walls in the bath from soot?
What is absolutely not worth doing?
When cleaning a bath, you need to remember one very important rule. In no case should you wet a tree that is seriously contaminated with soot! Unfortunately, this material is very good at absorbing moisture and everything connected with it. That is, even if it turns out to wash off some part of the carbon deposit with water, then its remnants will be absorbed into the structure of the wall, and it will be much more difficult to pick it out from there.
Therefore, when cleaning the bath from the main layer of soot, you should forget about the following items:
- water;
- soap;
- ordinary household sponges;
- spray guns.
They can only be used when everything possible has already been purified. It is also advisable not to heat the bath if the walls are too dirty. Because water vapor can condense on the boards and therefore be absorbed along with carbon deposits. It is still impossible to start cleaning work without taking care of the safety of health. That is, it is very important to wear a respirator, protective deaf glasses and thick rubber gloves.
How to clean the walls in the bath yourself?
So, it is very easy to destroy the soot on the walls and ceiling. But a sufficient amount of physical strength may be required.
- First you need to take a vacuum cleaner and carefully walk it over the dirty surfaces.
- Then carefully sweep the walls with a broom.
- To eliminate soot, you will have to buy a special sponge, which is impregnated from the factory with a special chemical mixture aimed at destroying soot.
- It is advisable to buy a lot at once, because carbon deposits are very difficult to remove, and they get dirty too well.
- However, if the top layer of the sponge is dirty, you can carefully cut it off with a clerical knife and work on.
- After removing all possible soot, you can wash the bathhouse.
- You will have to stock up on degreaser and a long mop in advance.
- It is necessary to soak it in hot water and drip detergent.
- After that, carefully and carefully begin to wash the walls from the remnants of soot.
- The water needs to be changed very often, as well as to wash a rag in it.
To accurately understand the question of how to clean the bath to the end, you need to rinse the soap solution from the wall and wipe it dry with a dry cloth.