Contents
How to clean the roller bearings and the rollers themselves from odor
Bearings are an important part of the design of any roller, because they largely determine how pleasant the process of driving on eight wheels of a vehicle promises to be. Moreover, this detail has a serious impact on the speed and feeling of flight, freedom. The most important thing in every situation is understanding how maintenance should be.
How to clean roller bearings: disassemble the rollers
Features of the influence of external factors on bearings
Maintenance guarantees successful operation. In every situation, this part of the device collides with fine sand from the road, water. Small particles can enter the interior through small gaps, despite the use of plates designed for maximum protection against dust, resulting in rapid wear of the balls as well as the product cages.
For this reason, it is advisable to carry out product maintenance on a regular basis and understand how to clean the roller bearings and restore the product to an optimum level of functionality.
So how do you clean the rollers and achieve good results from the procedure? How can you extend the life of the product? You will need:
- paper towels;
- a rag or soft wet wipes;
- newspaper;
- petrol;
- key;
- a wide can, which must be resistant to dissolution with gasoline, as well as a film box or other container that is long and has a narrow shape;
- a stick made of natural wood;
- Toothbrush;
- grease.
It must be remembered that cleaning will take time, so it is advisable to be patient:
- you need to spread a newspaper on the floor, and you should prepare for the fact that dirt will scatter during the unwinding of the bearings;
- now you should carefully wipe the bearing rollers from dirt, dust;
- using a hexagon, you need to unscrew the wheels from the frame of the structure. To make everything clear, it is advisable to arrange the wheels in order in two rows, given their location on the bearings;
- use the key to pull the bearings out of the vehicle wheel;
- follow-up activities include two flushes, lubrication and reassembly. It is important to note that grease can only be poured into a dry structure, and you can use a plastic or liquid mass.
Thinking about how to clean the rollers from odor and dirt, you need to be prepared for the fact that after grease the wheels will spin a little worse than before, and begin to stick a little, but the development of a lubricant will correct this situation in the shortest possible time.