Contents
How to clean the filter in a vacuum cleaner, depending on its model
Dust bags are a thing of the past, modern vacuum cleaners accumulate mined dirt in advanced filters. You don’t need to knock them out, but it’s worth looking after: regular cleaning will help extend the service life of the equipment. The process depends on the model of the vacuum cleaner and the type of filter.
The knowledge of how to clean the filter in a vacuum cleaner helps to extend the life of the equipment
How to clean the paper filter of a vacuum cleaner?
Paper filters are also called disposable filters. This does not mean that they can be used only once, usually the owners of such models vacuum until the quality of cleaning has noticeably deteriorated. The contaminated filter is then replaced with a new one.
To extend the life of such a product, resourceful housewives are trying to clean it. It will not work to wash the paper filter, but you can vacuum or shake off the dust with a brush, brush. Such manipulations help to restore the performance of the vacuum cleaner by 50-70%.
How to clean the cyclone filter of a vacuum cleaner?
Cyclonic models are easy and convenient to use, but they need careful maintenance. The filter consists of several parts – a dust collector, plates and sponges (the equipment depends on the specific equipment). It is required to rid it of contamination regularly, otherwise the machine does not cope well with the task, it quickly overheats or refuses to work at all. How do I clean the filter in this type of vacuum cleaner?
1. Remove and disassemble.
2. Shake out the contents of the dust container into a bag and dispose of.
3. Rinse the filter parts under warm water and leave to dry.
4. After all parts are dry, the filter is collected and reinserted into the vacuum cleaner.
It is better to clarify the nuances of cleaning a specific model in the operating instructions. It is recommended to empty the dust container after each cleaning; it is advisable to wash it at least once.
Cleaning the foam filters
Porous sponges found in collecting filters or near the motor often cause vacuum cleaner breakdowns. To prevent this from happening, they should be monitored especially carefully. Foam filters are easy to rinse and dry quickly, making them easy to clean.
1. For a thorough cleaning of dust, it is advisable to use soap, which the sponge is used for.
2. Rinse it until the water becomes clear.
3. Before putting the foam filter back in place, it is important to dry it thoroughly.
To improve the performance of the vacuum cleaner, it is recommended to replace these sponges periodically. To do this, you can purchase a universal filter (it is cheaper than the original), which can be easily cut to the desired shape.