How to clean the filter in a Samsung washing machine

If you notice that your washing machine is not draining or flooding well, it’s time to clean the filters.

Samsung washing machines have two filters – drain and inlet. Both perform a protective function, preventing CMA from entering debris during washing or when drawing water. Their timely cleaning allows the machine to function normally, as well as to avoid more serious problems that may require repair.

Function of filters and their location

Before you start cleaning, you need to find out where the filters are in the Samsung washing machine. We will also look at what signs you can understand that a blockage has occurred.

The inlet filter is clogged if:

  • After starting the program, water is taken for a very long time.
  • The washing machine issues a fault code after trying to pour water into the tank.

In such cases, cleaning the inlet filter of the Samsung washing machine is a must.

It is located at the junction of the inlet hose and valve. The fine mesh damper effectively retains small particles that are in tap water.

How to understand that there is a blockage in the drain filter for garbage in a Samsung washing machine:

  • Water after washing is drained for a long time and slowly.
  • Waste water does not drain at all.
  • When trying to drain, the washer gives an error code.

All of these signs can indicate a blockage. Therefore, it is important to figure out how to open and clean the filter in a Samsung washing machine. It is he who retains the pile, hair, small parts and objects while draining the waste water.

Please note that a severe blockage in the drain can cause the drain pump to malfunction, so do not delay cleaning. It is recommended to carry out it once every three to four months.

Self cleaning system

How to clean and also remove the filler filter from a Samsung washing machine? Follow our recommendations:

  1. De-energize the CMA by removing the plug from the socket. Make sure that the cord is fixed and that water does not get on it.
  2. Close the water shut-off valve.
  3. Disconnect the inlet hose by unscrewing it from the body of the washing machine. Be careful, water may come out of the hose. Prepare a container for it in advance or direct the hose into a sink or bathtub.
  4. Behind the hose you will notice a mesh. Pull it out with pliers.
  5. Rinse under water pressure.
  6. Set in place.

Great, you’ve done your first task. Now start learning how to clean and remove the drain filter from the Samsung washing machine.

  1. Pay attention to the front panel at the bottom of the CM case.
  2. Open it using a flathead screwdriver as the panel may be latched.
  3. After removing the panel, you will see a cork with a plastic notch.
  4. Before unscrewing and removing the drain pump filter from the washing machine, prepare a container, as water may spill out.
  5. If at the time of cleaning the washing machine has not drained the water, then tilt it back, substitute a bucket and, by unscrewing the filter, drain the water.

Note! Some manufacturers additionally fix the part with bolts that need to be unscrewed before removing and cleaning it.

  1. Unscrew the plug counterclockwise.
  2. Clean the part of debris, rinse under running water.
  3. Check the mounting hole of the part by shining a flashlight. If garbage is found, delete it.
  4. Replace the filter, close the panel.

There are also situations when the filter is not unscrewed, it is impossible to get it. What is the reason? If the drain system has never been cleaned, the part could boil over or become so clogged that it is impossible to get it out. Then, before cleaning the filter in the Samsung washing machine, you will have to get the pump:

  • After turning off all communications, lay the car on its side or tilt it back.
  • Loosen the pipe clamps, disconnect them from the pump.
  • Loosen the fastening screws.
  • Take out the pump along with the filter.

Dismantle the product on site. For easy release, WD40 can be used.

Blockage prevention

In order to clean the CMA systems as little as possible, follow some simple rules when washing clothes:

  1. Check the pockets of clothes before placing them in the drum. Free them from the little things.
  2. Items with small decorations are recommended to be placed in special cases so that the elements do not fall into the drum during washing.

Knowing how to clean the filter on a Samsung washing machine, you can do this work yourself. And if you perform clogging prevention, cleaning will have to be done much less frequently.

Video on the topic will help you:

Leave a Reply