Contents
How and what to clean the grate on the gas stove
The grill on the stove is usually given a minimum of attention. This leads to the formation of carbon deposits and non-washable dirt on it. If a similar problem is familiar to you, then this article will be useful to you. Find out how and with what to clean the grate on the gas stove.
How to clean the grate on the stove
How to clean a grate on a cast iron stove
The method of cleaning depends on the material for making the gratings. They may be:
- cast iron;
- steel;
- enameled.
So, cast iron gratings are most susceptible to scratching. Therefore, the method of cleaning them must be gentle.
It is not recommended to use steel wool, hard brushes or aggressive detergents. It is not advisable to wash cast iron grates in the dishwasher. Steam can be used to remove carbon deposits and stubborn stains. For this, a conventional steam generator is used. If not, the wire shelf can be placed on a baking sheet with water and sent to the oven.
Filament copes well with pollution. If it is possible to make a fire on the street, then a grate should be held over the fire. All carbon deposits will fall off in 2-3 minutes. Indoors, you can also heat up the grate by holding it over a working burner. However, you should turn on the hood and open the windows, as the smell will be pungent.
How to clean the grate at the stove: steel and enamel products
Steel and enamelled grates are much easier to clean. For this, you can use a variety of folk remedies. For example:
- soda;
- mustard powder;
- soda with ammonia (3: 1);
- washing powder with ammonia (3: 1);
- mustard powder with vinegar and dishwashing detergent (3: 3: 1).
Dilute any of the products a little with hot water until a mushy state is formed.
Apply the resulting mixture to the wire rack and leave for 30–40 minutes. After the time has elapsed, rinse the product under running water. If necessary, clean the grate with an additional steel wool. If you are using a recipe that contains ammonia, you can do without soaking. Simply apply the product to the wire rack, rub a little with a washcloth and rinse with water.
Prevention of contamination on the grate
To make it easier to clean the grate next time, treat it with a protective agent. To prepare it you will need:
- washing powder – 1 tbsp. l .;
- Soda – 5 Art. l .;
- stationery glue – 2 tbsp. l.
Mix all the ingredients and apply the mixture to the wire rack. When it’s dry, place it back on the stove. For the next cleaning, simply rinse the grate with lukewarm water. Carbon deposits and dirt will come off along with the protective layer.
Using these products, you can easily clean the grate on your stove. And to make cleaning even easier, remember to wash your garment at least once a month.