Contents
How and how to clean the well with your own hands in the country
Various techniques, which have proven themselves from the best side, can effectively remove dirt from the well, regardless of the degree of blockage.
How to clean a well in the country with your own hands
What methods of cleaning wells are there?
Procedure for cleaning the well:
- pumping out water;
- physical cleaning of the walls of the well, which are presented in the form of rings;
- cleaning and replacing the bottom layer of materials;
- chemical cleaning of the well;
- using cleaning products to remove dirt in the water.
Interested in how to clean a well in the country, you can count on the manual method and the use of a drainage pump. In each case, it is assumed that the dirt removal measure can be successfully carried out without any problem.
It is imperative that a phased and gradual washing of the well is assumed:
- the basis is pumping water out of the well by 20-60 centimeters with the simultaneous elimination of dirt from the walls;
- for this, it is recommended to use a large sponge or a soft brush, which is designed to remove dirt from metal surfaces;
- the material used must assume that there are no unnecessary risks to the structure of the ring, which is initially installed in the well.
It should be noted that dirt can fall into the water. This will not be a dangerous phenomenon, since it is assumed that the water is completely pumped out with the obligatory removal of dirt.
In this case, it is assumed that there is no possibility of using chemical detergents, since otherwise the work becomes unsafe and the composition of the water deteriorates significantly. For disinfection, it is allowed to use only a 10% solution of bleach, which can be used to coat the cleaned surface of the well.
Then the rest of the product is recommended to be poured into a well and left for 2 hours. Then the first two portions of water will be used for pumping.
It is important to understand how to clean the well with your own hands, because in reality the procedure is easy, not burdensome.
How to clean a well with a drainage pump?
This technique involves the use of a sump pump that needs to be properly adjusted. Then the equipment will independently conduct the event. The only task is to regularly lift the pump to clean the installed filters. If desired, you can install a pump on a permanent basis that can effectively maintain the frequency, and the filters can be cleaned every 6-12 months.
Knowing how to clean a well, you can always enjoy tasty and healthy water.