Extractor for fishing: how to do it yourself, how to use

Many anglers have experienced the rather serious problem of pulling out hooks that the fish have swallowed deep enough.

I had to suffer for a long time so as not to tear the tackle. Not everyone knows that there is a special device called an extractor. Especially, it is effective when the angler is dealing with small hooks.

The principle of operation of the extractor

How to use the extractor?

The fishing extractor is designed to quickly remove the hook from the fish’s mouth. There are two types of extractors: one type is made in the form of a needle, at the end of which there is a special cut, with the help of which the extraction process is carried out, and the second type is made in the form of tweezers, with which the hook is captured and pulled out. To ensure a secure grip, notches are made on the tips of the tweezers, which allow you to securely grip the hook.

Types of extractor for fishing

Extractor in the form of a needle

As mentioned above, there are two types of extractors. Most anglers use a needle-shaped tool, since its principle of operation is somewhat simpler, and it takes up less space. Plus, they are much more reliable. If you handle it correctly and carefully, then it can last more than one season. Needle extractors are made of both metal and plastic.

Needle-shaped extractor models are very popular with fishermen because they are reliable, lightweight and compact. In addition, with their help, it is easy to pull the hook out of the mouth of even very small fish, such as perched water, for example. Very often, anglers hang it around their neck with an elastic band, which allows them to act much faster. In this position, it absolutely does not interfere with the fisherman, since it is quite light.

Extractor in the form of tweezers

The second option is an extractor in the form of tweezers. A similar device is made of metal, so this type is also reliable. At the same time, its handles are rubberized, so they are quite comfortable, allowing you to work even with wet hands.

Such an extractor is mainly used by spinningists who practice catching predatory fish, especially pike. With the help of such an extractor, it is convenient to pull out various artificial lures from the mouth of a predator, armed with several sharp tees. They also take up little space, although there are slightly more needle-shaped extractors. Unfortunately, with such an extractor it is difficult to remove the hook from the mouth, for example, of an average crucian. But to get the hook out of the mouth of a pike or zander, you simply cannot do without tweezers.

Which extractor is best?

There is a wide variety of models on the market for fishing accessories. Each of them has its own advantages and disadvantages.

Extractor with Stonfo needle

It is produced in two versions, which differ only in dimensions, and the principle of their operation is identical. Sufficiently robust design, in great demand among amateur and professional anglers. Thanks to an interesting addition associated with the presence of a special needle, you can unravel various knots that have formed on the fishing line during the fishing process. In addition, the needle can be used in other cases. As a rule, this model is used by lovers of catching peaceful fish.

This extractor is not designed to extract spinners, therefore, it is better to use it when fishing with traditional methods and gear, in the form of a conventional float rod.

PRESTON Extractor 24 LH

You should also pay attention to this model, because it is durable and reliable. In addition, the 24 LH extractor takes up little space. It will help to remove hooks of any type from the mouth of a fish. This fishing assistant is not so expensive.

Extractor SALMO 9604-009

This hook extraction tool is made in the form of tongs, 23 cm long, which allows you to cope with the task without any problems. The handles of this tool are rubberized and black in color. Perfect for spinning anglers who need it to extract various artificial lures from the mouth of a predator. In this case, it is impossible to damage the bait.

The metal parts of the SALMO 9604-009 extractor are coated with waterproof paint, which protects them from corrosion. This is necessary because he has to work in a highly humid environment.

How to make a do-it-yourself fishing extractor

Not everyone can buy a good, reliable extractor, especially since it is very simple to make it. For its manufacture, any auxiliary materials that usually gather dust on the shelves of garages or balconies are suitable. Given the ease of manufacture, such a necessary device for fishing can be obtained absolutely free.

Toothbrush extractor

The manufacture is quite simple, given that everyone in the family has their own toothbrush, therefore, you can simply take and renew them, taking the old one, already “circled”, and buy a new one in place. By the way, toothbrushes should be changed quite often, since these are the requirements of personal hygiene.

From an old toothbrush, saw off the bristles along with the head. If no one uses a toothbrush, then you can buy, moreover, the cheapest one. As a result of such actions, a leg will remain from the brush. Moreover, the longer it is, the better, as it will be more convenient to work. To make the tool workable, you should make a small cut in the leg, which will help to remove hooks of different sizes.

After that, you need to grind those places where the cut was carried out. This is necessary in order not to accidentally fray the fishing line, especially thin. The cut should be such that several hook sizes can be retrieved. Too wide a cut will not allow you to remove small hooks. In extreme cases, you can make several extractors to extract both small and medium-sized hooks. Large hooks are best removed with tongs.

It is better to make a hole at the top of the toothbrush if there is none. Usually, in cheap options, such a hole is absent. It will be needed so that the extractor can be hung around the neck. If everything is done correctly, you will get an excellent assistant and then you will not have to waste precious time on a long extraction of the hook from the mouth of the fish.

Given the fact that the extractor, compared to other fishing accessories, does not cost too much money, you can buy it so as not to waste precious time on its manufacture. At the same time, it is necessary to take into account the fact that outright handicrafts, and irresponsible ones, are also found on the fishing accessories market. Therefore, it is quite realistic to purchase an ordinary fake that will not last long.

You will have to pay attention to the part that is used to pull the hook. It must be made of either metal or durable plastic. And yet, metal should be preferred, with a good anti-corrosion coating, no matter how durable the plastic is, it is still inferior to metal.

The extractor is good because it does not allow you to injure the fish when the hook is pulled out. This is especially true in cases where the caught fish needs to be released. If it is painlessly released from the hook, then it will remain quite viable.