Contents
Sometimes the Samsung washing machine, after the start of washing, suddenly stops spinning the drum and turns on the drain pump. At this time, the display shows the error OE, OF, E3, OC.
New models of Samsung washing machines give an 0E error, and an identical E3 error is displayed on the display in models that were produced before 2007.
What error means
An OE error in a Samsung typewriter means the drum is overflowing with water. A signal is sent from the water level sensor to the washing machine, indicating that there is too much water in the drum – more than required for the selected program. Therefore, the machine stops washing, after which it turns on the drain pump and shows OE on the display.
Code 0F also indicates overflow with water – this is what this error that appeared on the washing machine means. Although these error codes may indicate incorrect pressure switch readings.
If your Samsung model does not have a display, how to identify this error? Check the indicators on the panel: the 40 ° C and cold water lights are on at the same time, and all washing modes are flashing.
Why does the error appear
If the OF, OC, OE, E3 error is on, then the reason may be:
- In the wrong connection of the drain hose to the sewer pipe, as a result of which the washing machine is filled with water through this hose;
- In blocking the valve for filling water;
- In using low-quality powder or exceeding its quantity per wash cycle;
- In a failure that occurred in the control module.
Often, in order to remove the Samsung CMA error, you need to invite a professional master, since it is possible that a breakdown has occurred.
What to do with OF, OC, OE, E3 errors
They require a solution to the problem, but for this it is important to know how to eliminate the fault code that has arisen. And this directly depends on the reason for the appearance of the OS indication.
Here is what you need to do to correct the situation and get the washing machine working properly:
- If there is a lot of powder in the drum, a lot of foam will form. It enters the pressure switch tube and creates increased pressure. Therefore, the water level sensor starts the process of draining the water, and the code 0C, 0E, E3 is displayed on the screen of the washing machine. In this case, it is necessary to drain the water, pull out the laundry and run the machine for rinsing to rinse the drum. Next, run the test machine to make sure the OC error is fixed.
- If the washing machine is not properly connected to the drain hose, the display will show OE, OF, E3. It is necessary to carry out the correct discharge into the sewer pipe.
- If there was a temporary failure in the control module, then here’s how to fix it – turn off the washer, remove the plug from the outlet, let the machine rest for 5 minutes, then turn it on again, and start the washing process.
If these error reset methods did not help, then a professional inspection of the washing machine is necessary.
Breakdowns requiring a call of the master
Other serious malfunctions in the Samsung washing machine also cause errors marked OS, OE, E3, OF:
- The water level sensor is junk – this element needs to be replaced;
- The tube and the air chamber of the pressure switch are clogged – it is necessary to clean these elements;
- Faulty control controller – requires changing the fuse or the entire controller;
- The inlet valve is broken – it needs to be replaced;
- Weak contact or break in the wire of the water level sensor – it is necessary to connect the damaged wires or install a new cable with wires.
How to fix such breakdowns?
You can deal with the OE fault code yourself, after finding out its cause. But often the intervention of a master is required, which will eliminate the breakdown.