If the Ariston machine shows error F17 on the display, this may mean a problem with closing the door.
Electronically controlled CMs display an error code on the display, while electromechanical models display a fault code on the control panel. At the same time, the “Extra Rinse” – “Spin” lights blink.
What does error F17 mean
What should I do if the hatch of the Ariston or Hotpoint Ariston washing machine does not close and error F 17 is displayed? Having found out what is the cause of the malfunction, you will understand how to fix the breakdown.
We will analyze the main problems of the hatch, as well as ways to solve the problem.
Door does not latch
When closing the machine, something seems to be in the way.
Perhaps this will help reset the F17 error. If this is not the cause of the breakdown, how to fix the situation, read on.
The door is not locked
Since the hatch is not blocked, washing cannot start. Perhaps the guide is worn out. The element cannot be repaired, it is better to replace it.
Blocker not working
The hatch of your Ariston washing machine (Hotpoint Ariston) works as usual, but washing does not start, error F 17 is on.
What does it mean: the blocking device (UBL) is faulty. Before making a replacement, check the blocker with a multimeter to confirm the breakdown.
Also, the UBL could become clogged with small debris. To replace and clean the device, you need to remove it. Do the following:
- Disconnect SM Ariston from the network.
- Shut off the water supply.
- Open the hatch, unscrew the screws securing the lock.
- Having unbent a rubber seal, pry a spring under it and carefully pull out.
- Slide the seal to the side and pull out the UBL.
- Press the latch, remove the cover.
- Disconnect the wires, install the new lock in reverse order. This video will help you:
If the machine is working properly, the hatch is well fixed and the error has been removed, then everything is done correctly. Following the recommendations, you can fix the washing machine yourself.