Error F12 in the Indesit typewriter – how to fix it

Why does the Indesit washing machine show error F12 on the display? Models with electromechanical control show a fault code with the “Super Wash” – “Delay Wash” indicators on, or the “Turns” light flashes.

These signals indicate problems in management. To accurately determine the cause of the breakdown, you need to analyze in detail what the error code means.

F12 is highlighted – code value

What does error F 12 mean in the Indesit washer? This is a sign that the connection between the control and power unit has disappeared. Simply put, the indicator lights do not respond to button presses, the contact is broken.

Often F12 is displayed immediately after connecting the Indesit CMA to the network, after which the system freezes. To change the position, you will have to reboot the system, and you need to do it correctly.

Fault code F12 can appear both on electronic models with a display, and on electromechanical ones, with an indication.

Reasons for the appearance of the F12 code

Most often, such malfunctions occur:

  • Due to unstable voltage and sudden power surges. Subsequently, the contacts burn out.
  • High humidity of the room where the SMA is located, which leads to corrosion of the elements.

High humidity can affect the operation of the washing machine motor. It also corrodes, rusts and stops functioning properly.

How to fix the error yourself

We reboot to reset the error:

  • Switch off the Indesit machine by pressing the On/Off button.
  • Pull the plug out of the socket.
  • Wait 2-3 minutes, then turn on the washer.
  • If it was not possible to remove the F12 error from the Indesit panel, repeat the steps three times.

If the fault code is still shown on the display, the contacts of the control and display module may have burned out.

What to do in this case? Should:

  1. Open the front panel of the washer and remove the control unit.
  2. Inspect for signs of oxidation or damage.
  3. Inspect and test pin J11 which serves as the connection between these systems.
  4. Clean the connector if necessary.
  5. Then you need to check the Indesit washing machine for performance, if it does not work correctly, the cause of the problem lies in the board.

How to fix a breakdown in the control board, we have already told. If it needs repair, it is better to contact a professional who accurately diagnoses the breakdown and helps to get it working.

Often, when the machine gives an error, it is easy to solve the problem at home, on your own.

Leave a Reply