Error F11 in the Indesit washing machine – a solution to the problem

What does error F11 mean, which is on the display of the Indesit washing machine? What should I do if the “Extra Rinse” – “Spin” – “Spin” lights are flashing, the “Delay” – “Quick Wash” – “Extra Rinse” indicators are lit?

To solve the problem, you need to decipher the fault code.

Decryption of the error code

If the Indesit washing machine shows error F 11 on the display, this means that the drain pump is not working. Perhaps there is no voltage, or it burned out.

How the problem manifests itself:

  • The machine does not drain water.
  • The laundry does not spin.
  • Washing stopped as soon as it started.

Causes and remedies

If a system crash occurs, reset the error by shutting down and rebooting the machine.

After the actions taken, it still shows the error F 11? We offer options on how to fix the problem.

Checking pipes and drain filter

The most common problem is blockage. Small debris, hair, clothing items can get into the filter.

  1. Disconnect the Indesit washing machine from the mains.
  2. Open the hatch at the bottom of the body and drain the water.
  3. Check and clean the pump, filter and drain pipe.

Failed to remove the F11 CMA Indesit error? Check further.

Pump Inspection

If the drain also does not work, the cause may be a malfunction of the pump. The wiring may be damaged and electricity is not being supplied to the pump.

  • Remove the back panel of the washer.
  • Inspect wires, contacts, check connections.
  • If there is no visual damage, check for an open with a multimeter.

Impeller failure

When draining the water in the Indesit washing machine, do you hear a hum? Check the impeller for blockage, a foreign object may have entered. How to fix the situation:

  1. Take out the drain filter.
  2. Remove the snail, clean it.

When to replace the pump and its components:

  • The machine stopped working before the program.
  • The work is going on as usual, but the water does not drain.
  • Draining occurs with extraneous sounds.

Pump problem

A pump failure can cause an F11 error in the Indesit washing machine. If the previous steps did not help, check:

  1. Unplug the washer and turn off the water.
  2. Remove the bottom panel, unscrew the pump.
  3. Check the winding resistance with a multimeter, it should be no more than 220 ohms. If more, it is better to change the pump.
  4. Remove the hose clamps, move the clamps.
  5. Install the hoses on the new part, put them back in place.

Now you know what to do when the Indesit machine gives an error F 11. After repair, turn on the control wash to check the performance of new parts.

Leave a Reply