Electric pump for pvc boats, an overview of the best and tips for choosing

Purchasing an inflatable boat requires purchasing a high performance pump. This is due to the fact that it takes a lot of time to inflate it with a frog-type pump, which is included with the boat. As a rule, preference is given to an electric pump, which is powered by a car battery. Despite this, not every PVC boat owner is ready to buy an expensive item.

How to choose an electric pvc boat pump?

The choice of pump depends on various factors that can influence the selection process. First you need to decide on the purpose of the pump and its price. Before buying, it will not be superfluous to pay attention to the following characteristics of the model:

• The admissibility of work from the accumulator or lighter of the car. As a rule, centrifugal pumps operate from the vehicle’s on-board network 12V. Designs with higher performance are connected to both the battery and the cigarette lighter. At the same time, there are models that also work from the 220V network.
• Boats with a length of up to 4 m require an electric pump with a capacity of 300-400 liters per minute. Boats over 4 meters in length require a pump with a capacity of up to 1000 liters per minute. The pump must provide a force of 300-400 mbar so that it is not necessary to pump up the craft with a hand pump, such as a “frog”.
• The presence of a check valve for pumping air out of the cylinders. This function makes it possible to perfectly evacuate the air from the boat, which makes it possible to fold the boat more tightly for transportation.
• The presence of a built-in pressure sensor, which allows the pump to operate offline. This eliminates the need for air pressure control.
• The presence of a built-in battery.

5 best electric pumps for pvc boats

Electric pump Bravo 12

It features a built-in power regulator, which expands its functionality. With the help of the pump, it is possible to pump up not only boats, but also other structures. In eight minutes, he can pump up a four-meter boat to the optimum pressure.

The user can independently select the working pressure. After inflating the structure, the device itself is able to turn off, which will save, for example, a boat from excessive pressure. With its help, it is possible not only to pump up, but also to pump out air. The pump kit comes with connectors for various valve designs, which allows you to pump different designs.

Device Specifications:

• Supply voltage – 12 V.
• Current consumption – up to 9 A.
• Performance – 150 l / min.
• Working pressure – 300 mbar.
• Construction weight – 1100g.

Bravo Turbo Max

It is designed to obtain optimal pressure in air tanks.

The package includes:

• Hose for connection to the pump.
• Electrical cable with crocodile terminals.
• A set of adapters for various valve designs.
• The fitting that connects the air hose to the compressor.
• Built-in pressure regulator.
• Bag for transportation with the presence of the required number of compartments.

To download the design you need:

• Connect the air hose to the compressor and the object to be inflated.
• Connect the electric pump to the battery using alligator clips, observing the polarity.
• Turn on the device by pressing the “ON” button.
• Set the desired pressure on the sensor.
• After completing all the preparatory operations, the “START” button is pressed.

To pump air out of the boat, you should switch the air supply hose to another pipe marked “IN”. All subsequent actions are the same as when pumping up the boat. The case of the device has no protection against moisture ingress, therefore, being near a reservoir, you need to be careful enough so that moisture does not get on the device.

Technical characteristics of the electric pump:

• The maximum generated pressure is 250 mbar.
• Productivity – 1000 l.
• Current consumption – 45-60 A.
• Supply voltage – 12 V.
• Weight – 3,5 kg.

Bravo BST 12 HPP

The pump model is designed for inflating large PVC inflatable boats.

The package includes:

• Air tube
• Cable with alligator clips
• Valve adapter set
• Built-in pressure indicator
• Keys for turning the pump on and off.
• Bag for transportation.

The design consists of two separate blocks. The operation of the device begins with the launch of the first module. When the first module reaches the maximum working pressure, the second, more powerful module is switched on. When the second unit is turned on, the pump operation becomes noisier.

If the device does not switch, then you should pay attention to the completeness of the battery charge and, if necessary, charge it. Although other reasons are possible.

The boat is inflated as a result of the following steps:

• Connect the air connection accordingly.
• Connect the pump to the power supply.
• Connect the nozzle to the boat using the appropriate adapter.
• The pressure regulator is set to the desired position, after which the “ON” button is pressed.

To evacuate the boat:

• It is necessary to switch the air hose to the air evacuation pipe.
• Pumping is not carried out autonomously, so you will have to control this process.

Main technical characteristics:

• The maximum working pressure is 800 mbar.
• Supply voltage – 12 V.
• Consumption current – 15-20 A.
• The device weighs 1,9 kg.

BRAVO BST 12

This pump is suitable for inflating boats with cylinders operating pressure not exceeding 300 mbar. This is always noted in the boat’s passport. The BRAVO BST 12 electric pump is designed on the basis of a two-stage compressor, which allows you to inflate other inflatable structures.

The set of the device includes:

• An electrical cable up to 3 meters long, which can be connected both to the battery and to the cigarette lighter, as well as a set of connectors for various valve designs.
• Built-in pressure regulator.
• Air hose.

Features devices:

• Supply voltage – 12 V.
• Consumption current – 15 A.
• The maximum pressure is 300 mbar.
• Performance – 500 l / min.
• The weight of the device is 1,5 kg.

Pump Intex 68609

With this model, you can quickly both pump up the boat and pump out air from the cylinders. Able to work both from the 220 V network and from the car’s on-board network with a voltage of 12 V.

The kit includes:

• Pump.
• Tube for pumping air with adapters.
• Converter 220/12 V, as well as a connector for connecting to the cigarette lighter.
• Guarantee sheet.

The main characteristics of the model:

• Producer – Intex (China).
• Power supply – 220/12 V.
• Performance – 600 l / min.
• The maximum pressure is 800 mbar.
• Weight – 3,5 kg.
• Dimensions – 260/160/110.

Pump operation and application rules

In order for the pump to please its owner with reliable and confident operation, the following recommendations should be observed:

• Turn on the pump only after carefully checking all connections for reliability.
• Operate only with a fully charged battery.
• The device must be installed on the same plane as the inflated object.
• Do not leave the device in direct sunlight or in freezing temperatures.
• Avoid water ingress and avoid mechanical damage to the housing.
• Do not kink the hose during operation.
• It is not recommended to work continuously for 20 minutes or more.
• Transport only in the case supplied with the device.

Following these recommendations, it will be possible to increase the service life of this device.

Which electric pump to choose depending on the design of the boat?

Depending on the pressure produced at the outlet, electric pumps are divided into 3 categories:

• Low pressure pumps (40 mbar). Suitable for pumping small boats. After preliminary pumping, the boat is pumped up with a mechanical pump (frog).
• Medium pressure pumps (500 mbar). With their help, you can pump air into boats up to 4 meters long, inclusive, without additional pumping.
• High pressure pumps (800 mbar). They are used for inflating large inflatable boats, as well as for inflating boats with an Air deck bottom.

Why do we need a high pressure pump (up to 800-1000 mbar)?

As mentioned above, such a pump is used to inflate larger devices. At the same time, it has an impressive cost. It is better to choose a pump depending on the type of boat and its characteristics.

Advantages and disadvantages

The advantage of pumps is that a medium-sized boat can be pumped up in 10-15 minutes without much effort.

In addition to all of the above:

• The presence of a pressure indicator allows you to control the process of its work.
• The presence of the reverse function makes it possible not only to quickly and efficiently inflate the device, but also quickly and efficiently pump air out of it.
• Models with 220/12 V supply allow you to save the battery and use it when it is not possible to connect to a 220 V network.

Along with the advantages, there are also disadvantages, which include:

• The need for a power source.
• The device has a high cost.

Tips from experienced anglers on choosing a pump

For those who have not yet purchased an electric pump, it will be interesting to know:

• It is recommended to purchase such devices only from well-known and trusted manufacturers.
• The pump is selected based on the volume of its watercraft.
• Not bad if the design is equipped with a turbine-piston supercharger.

In other words, the choice of a pump is preceded by various factors that, one way or another, influence this process. The main factor that can become decisive is the financial factor. The more opportunities an angler has in terms of availability of funds, the better the model can be purchased.

Moreover, the dependence on opportunities can also be traced by the presence of a PVC boat, and most importantly, its size. Accordingly, the pump will be purchased. Although many anglers still use the “frog” and only dream of an electric pump.