Do-it-yourself foam fireplace: step by step instructions, photo

Do-it-yourself foam plastic fireplace, step-by-step instructions for the implementation of which will be presented in a variety of variations, can become a center of coziness and comfort not only in a residential building, but also in an apartment. This decoration of the room is especially relevant on the eve of the New Year holidays. A false fireplace will harmoniously fit into any interior, while making it will not be difficult at all.

The original foam fireplace is a great alternative to a full-fledged hearth

Decorative foam fireplace in the New Year’s interior

A false fireplace, created with your own hands according to step-by-step instructions for the New Year, is not only a decorative element, but must also be in harmony with the surrounding interior. As a rule, the style direction for such a design is chosen taking into account the general idea of ​​uXNUMXbuXNUMXbdecorating the entire room. Also, with step-by-step creation, it is worth relying on its secondary function – to give a festive mood.

Styrofoam – the material is light, the design of it will also have a small weight, which will allow you to easily move the false fireplace at will or even install it only on holidays and clean it on weekdays.

Choosing a style for a fake fireplace made of foam

The shape, size and final decoration of a do-it-yourself foam fireplace will directly depend on the style in which they plan to create such a design. Basically, there are four main areas that are most often used in the design of these products:

• classic – more suitable for lovers of simple shapes, clear boundaries and strict contours. The advantage of such a fireplace is that it will fit into almost any interior;
  
  

  A feature of the step-by-step execution of a fake fireplace in the classic version is the use of a simple and at the same time elegant design.

• modern is a style that is distinguished by an unusual combination of colors and shapes, as well as mixing two opposite directions at the same time;
  
  

  The fireplace, made by hand in the Art Nouveau style, does not have unnecessary details, everything is quite concise, but also very bright

• provence and country – are considered currents, where natural finishes are used to the maximum, thanks to which home warmth and comfort are felt;
  
  

  When creating a step-by-step fireplace on a country theme, wooden elements are sure to be used

• modern styles (minimalism, hi-tech) have a technological design that stands out with simple contours, cool tones and high functionality.
  
  

  When decorating a fake fireplace with your own hands in high-tech style, the use of elements made of glass or metal is inherent.

How to make a foam fireplace with your own hands

When planning to make a foam plastic fireplace with your own hands, in addition to step-by-step instructions, you need to acquire certain tools and materials. Naturally, the very first thing to prepare is foam sheets. And then you will need the following tools:

• ruler (long metal or wooden);
• yardstick;
• a simple pencil;
• hacksaw;
• construction knife;
• adhesive tape (reinforced or molar);
• glue;
• scissors;
• paint and brushes.

Depending on the idea, you may also need to finish the foam fireplace with:

• putty;
• PVA glue;
• white napkins;
• acrylic paint;
• cardboard;
• polyurethane moldings.

How to make a cardboard-based foam fireplace

It will not be difficult to make a decorative fireplace with your own hands from foam plastic if you choose cardboard as the basis for this design.

Do-it-yourself step-by-step execution of a fireplace:

1. To begin with, a sketch of the future design is prepared, after which it is transferred to cardboard in compliance with the required dimensions. Carry out the assembly of the frame of the future fireplace.

   

2. The false fireplace portal is pasted over with “bricks” cut out of foam plastic in a checkerboard pattern. Put them on polymer glue

   

3. The front side and sidewalls of the structure are glued with foam ceiling tiles.
   
   

   Light squares can be used both plain and in any color design.

4. The fireplace shelf is made of plywood or laminate panel. A baguette is glued along the edge of the joint.
   
   

   Ends can be hidden under plastic corners

5. At the end, they decorate the fireplace under the New Year theme.
   
   

   Real firewood is placed in the portal, and LED lamps are used as fire

New Year’s foam fireplace on a wooden base

To make a fireplace on a wooden base with foam plastic with your own hands, ordinary hanging shelves are suitable. The process itself is concluded in the following step-by-step actions:

1. To begin with, the shelves are cleaned, unnecessary loops are removed and the surface is primed to hide bumps and cracks, if any.
   
   

   Let the primer coat dry completely.

2. Prepare “bricks” of foam of the same size. The resulting elements are glued to the shelves, imitating real masonry.
   
   

   Styrofoam “bricks” should be glued so that they are in harmony with each other on both sides of the fireplace

3. After complete gluing of the parts, the surface is painted with acrylic paint in several layers with an interval of 1-2 hours between them.
   
   

   The last time you should apply the paint with a roller or foam rubber sponge so that there are no streaks left.

4. A furnace arch is made from a foam sheet. To do this, make a markup and cut out on it.
   
   

   Styrofoam is best cut with a sharp clerical knife

5. The resulting part is placed between two wooden bases and pressed tightly. Mark the location of the future firebox.
   
   

   Apply glue to the sides of the foam arch and wooden shelves, glue the element

6. Carry out a fireplace cover. Styrofoam is also used for this. From the side of the facade, a ceiling baguette is fixed.
   
   

   Since the parts of the foam are poorly fixed together with glue, they should be attached to toothpicks

7. Tiles are laid on top of the cover.

   

8. The back wall of the fireplace is made of red satin fabric to create the illusion of a heated stove.
   
   

   Decorate with traditional Christmas decorations

A simple version of a thin foam fireplace for the New Year

You can make a false fireplace with your own hands according to step-by-step instructions, not only on the basis of cardboard and wood, but also completely from foam. And for these purposes, the simplest thin material is suitable.

Step-by-step steps to create a fireplace with your own hands:

1. First, blanks are prepared from a foam sheet for the rear, front and side walls. Cut out two rectangles 60×40 cm and 40×20 cm.
   
   

   PVA glue is also prepared and for additional fixation – toothpicks

2. Connect all elements together.
   
   

   First, the joints are smeared with glue, and then they are strengthened with toothpicks.

3. On the front side, the seams are primed.
   
   

   Seams can be primed with any acrylic compound.

4. Start marking and cutting holes for the firebox.
   
   

   The thinner you use the blade for cutting, the neater you get

5. Start decorating the future fireplace. You can use tape for this. It is abundantly moistened in PVA glue and pressed along the sections of the firebox. Primed on top.
   
   

   The primer coat is given a couple of hours to dry thoroughly.

6. The construction is completed by attaching a cover identical to the sides. Also perform priming joints and decoration.
   
   

   Corners can be trimmed with small metal ornaments

7. The finished false fireplace is installed on a base made of thick cardboard.
   
   

   Decorate the fireplace with gold paint and various decorations

Do-it-yourself fake fireplace made of thick foam plastic

The interior hearth can also be built with your own hands from thick sheets of foam. In this case, it is worth giving preference to the angular design.

Step-by-step process:

1. First, mark the future fireplace. Cut out the necessary details and form the base of the structure.
   
   

   When cutting the base of the fireplace, the location of the skirting boards is taken into account and cuts are made so that the structure stands close

2. Perform the back wall of the furnace.
   
   

   Fix the central element above the base of the fireplace with glue

3. The portal is cut to the appropriate size and also installed on the base.
   
   

   The portal can be made arched or rectangular

4. Close the side holes also with foam.
   
   

   The sides should be pressed against the wall and the structure itself close

5. Install a fireplace mantel.
   
   

   All joints are additionally reinforced with adhesive tape

6. At the end, decorate the fireplace. To do this, cut out “bricks” from cardboard and glue them in a checkerboard pattern. Then they cover the top with a primer layer, allow it to dry, and then paint the structure.
   
   

   Instead of a primer layer, you can glue the surface of the fireplace with paper napkins

Styrofoam Fireplace Ideas

After the step-by-step manufacture of such a decorative element with your own hands, you definitely need to decorate it. There are many ideas for this, for example, if the fireplace was created for the New Year, then any little things related to the holiday can be used for decoration.

The fireplace mantel can be decorated with a garland of Christmas decorations and coniferous branches.

A miniature Christmas tree and tinsel on top of the fireplace will look good.

You can apply a variety of themed pendants and figurines

You can also hang Christmas socks as a traditional decoration.

How to make fire for a fake fireplace

An important role in the step-by-step creation of a false fireplace with your own hands is played by the correct imitation of fire. For these purposes, there are a large number of fairly simple and very successful ideas. The most common thing that can be used is candles. A real flame will look very impressive. But it is important to follow the safety rules. Although the foam is not a rapidly flammable material, under the influence of high temperatures it begins to melt. This should be taken into account when placing candles.

For greater beauty, it is better to draw a fire or stick a photo image on the back wall of the firebox

Another way to imitate is to install a mini-fan that will disperse the satin fabric, creating the effect of flames.

Conclusion

A do-it-yourself foam plastic fireplace, a step-by-step instruction for the execution of which can have a variety of options, allows you to create a festive New Year’s atmosphere in the house. In addition, this design is budgetary and does not require much time to create.