DIY rocking chair: how to make it from wood, metal, plywood, drawings and dimensions for making furniture

Design features

First you need to figure out what types of rocking chairs exist:

1. Classic model with skids. Suitable for a modern or classic style room. Made from plywood or solid wood. The rocking chair swings smoothly, but with a strong reeling there is a risk of capsizing.
2. Rocking chair with chippers. For safety, the chair is recommended to be made with a high or medium landing. The design feature is that the runners are curved in the opposite direction.
3. Armchair with elliptical runners. Swinging on it will be gentle, but to reduce the risk of tipping over, it is worth equipping the furniture with bumpers. For the garden, there are models with an awning that are guaranteed not to tip over.
4. Multifunctional models have the appearance of an ordinary chair, which transforms into a rocking chair or lounger.

Video “Do-it-yourself rocking chair”

From this video you will learn how to make a rocking chair for your home or garden with your own hands.

Manufacture by own hands

Before starting the process, you should create a drawing. You can find ready-made drawings on the Internet, but it should be understood that they are made for certain people and will not suit a wide range of users. At the initial stage of work, craftsmen are advised to study the basics of kinematics in order to understand the main principle: the convenience of such furniture for the garden depends on the placement of the center of gravity of a person in relation to the center of the circumference of the product. The ideal option is to design furniture with such dimensions that it can be used by the heaviest person in the family.

wooden product

Rocking chair in a classic style is perfect for debut furniture making. It is difficult to create a model from solid wood, so plywood will become the main material.

The first option is furniture with wicker elements:

1. Plywood should be applied to pre-prepared templates and cut out elements for the frame. It is better to choose a three-layer material made of maple. To make the frame smooth, it must be carefully processed with sandpaper.
2. Small holes are drilled around the perimeter of the entire frame every 2 cm. The back and seat will be made of cane, so it needs to be twisted together and secured with knots in the holes. The finished garden product is varnished several times.

The second option is a chair of the original form:

1. It is necessary to cut out two boomerang-shaped supports from 1,5 cm thick plywood. The edges must be processed with sandpaper. From the same plywood, 14 strips with dimensions of 59×6 cm should be cut. Additionally, you need to make several bars for support 5 cm long.
2. A base is created: supports are glued to the two side walls. For greater strength, they can be fixed with self-tapping screws.
3. After completion of the main work, the product is covered with stain. It is necessary to paint home-made furniture twice, while you need to wait until the first layer dries.

Metal armchair

A forged rocking chair can be created from shaped pipes, preferably with an elliptical section. For work you will need a grinder or a welding machine.

The procedure for creating furniture with your own hands is as follows:

1. First you need to make a metal frame. To do this, you need a corner of steel and several thin profile pipes. The base should look like a chair, to which curved metal skids are attached at the bottom.
2. After the assembly is completed, the frame should be painted. When the coated dries, you will need to drill holes for self-tapping screws along the entire length of the product.
3. The basis for the back and seat of the rocking chair will be wooden planks. You can buy them at a hardware store or make your own. Planks should be attached to the screws.

Other versions

If you connect fantasy, then you can make a chair from improvised materials. For example, if there is a cable reel, then two large circles from it can be used as the basis for a future product.

There is an option to make a rocking chair without nails. This will require a few sheets of plywood and a little diligence. Details are cut out according to a pre-created pattern, and then glued together.

You can make furniture from polypropylene pipes. In hardware stores today there are a large number of pipes of different diameters and colors. For manufacturing, you do not need a large set of tools – a hacksaw, tape measure and marker are useful. Such a chair will fit well into the original interior.

Wicker rattan furniture looks good in a country-style room. For the base, rods with a diameter of 5 cm are suitable, for sitting – 1 cm. The rods must be of high quality, the durability of the product depends on this.

Even waste, such as plastic bottles, is sometimes used as the basis for furniture. It is necessary to carefully select such material for the chair, be sure to pay attention to aesthetic appeal.

Decor options

The finished chair can be decorated with many small pillows that will create the right mood in the house. An alternative to pillows is a mattress attached to the rocking chair with ties. Decor can be bought at the store or made with your own rivers. In any case, natural materials should be preferred.

Another important stage in the creation of furniture is its coloring. The paint should protect the furniture from moisture penetration and the influence of the sun. As for color solutions, here the furniture owner can rely on his own imagination.

A comfortable armchair created with your own hands will not leave indifferent any member of the family. After studying the article, a home master with a minimum set of skills will be able to bring his ideas to life.