Contents
Have you recently bought a clothes dryer? So connecting the dryer is a topical issue for you. Here, attention should be paid to the 4 most important points: alignment, nutrition, drain and ventilation. Following the simple recommendations and instructions given in the article, you can connect the device correctly without any problems, because the process itself is quite simple and understandable for the average user.
Dryer options by installation method
Today, there are three main types of clothes dryers on the domestic market:
- Condensing. Provide the passage of heated air through the linen chamber. Excess moisture from the drum through the heat exchanger enters a special assembly container, which is recommended to be cleaned after each use.
- Exhaust. They provide drying of things by exhausting air into the ventilation duct.
- With heat pump. They have a principle of operation similar to condensing dryers. The main difference is that condensate does not accumulate in the tray, but immediately goes into the sewer.
Important! Condensing models are suitable for rooms where there is no air outlet. In private houses and apartments with a normal ventilation system, it is preferable to install exhaust devices or models with a heat pump.
The best solution for a small apartment would be a unit that simultaneously performs the functions of a washing machine and a dryer.
The most popular dryer manufacturers with a proven track record are Miele, Siemens, AEG, who are “Electrolux», who are “Indesit», Bosch. They are distinguished by good power, long service life and reliability. On the drying devices of these companies, experts recommend stopping your choice.
Dryer placement options
There are many ways to set up a dryer. Most popular:
- embedding under the kitchen worktop;
- vertically above the already installed washer;
- in a special drywall niche;
- near the washing machine (but already in the horizontal plane).
Important! In small apartments, it is preferable to put the dryer on top of the washing machine to save space.
Required Tools
Getting started with the installation, stock up:
- straight or Phillips screwdriver;
- building level;
- pliers;
- drying hose;
- collar.
How is the machine connected?
The sequence of actions will be determined by the installation method.
When placed vertically
In most cases, the installation of the dryer is carried out in a vertical column with a washer. For this, it is recommended to choose models of the same width. In this case, the entire structure of technology will be more stable.
Before starting the installation, it is necessary to buy fasteners with special caps (transitional frames).
Scheme of actions:
- Install fasteners on the lower unit (washer).
- Unscrew the legs on the dryer and install it in the caps.
- Level the equipment using the building level. To do this, lay it first on the front of the machine (the edges should point to the left and right, respectively), then on the back, then on the sides, adjust the height and tilt level.
When placed horizontally
This method of installation will ensure maximum stability of the equipment. To install in the right place, you just need to unscrew the legs to the desired length and level them.
Connection to communications
After installation is complete, you can proceed to connect the power supply. Then, depending on the type of device – to the sewerage or ventilation connection.
We connect to the mains
Guide to action:
- Lead a special line for household appliances from the junction box.
- Use only a grounded outlet to turn on to avoid electric shock.
- Provide a circuit breaker for the unit. In the event of a power surge, it will save the machine from damage.
- Plug in the dryer.
Important! Before starting the first connection of the machine to the network, turn off the electricity in the house for the safety of electrical work.
Instructions for connecting ventilation
- Lead a flexible air outlet hose (comes with all models of dryers) to the air vent of the machine and secure with a previously prepared clamp. Do this with a screwdriver and pliers, tightening the clamp just enough so that it does not fly off when pulled.
- Take the other end of the duct to the ventilation shaft in the wall. Output so that there are no kinks on the corrugation or their number is minimal. Is the hose loose? Also secure it with a clamp.
- Switch on the dryer and carry out a test run. Make sure the device is working properly.
Connecting to the sewer is even easier: the drain hole of the hose is simply connected to the sewer system.
Now you know how to connect the dryer without assistance and save on calling the master. The process itself is very similar to connecting a washing machine. Proper installation and connection is a guarantee of long and trouble-free operation of equipment.