Catching carp on a spring with foam: how to fit the foam

Catching carp on a spring with foam: how to fit the foam

Although it is hard to believe, but crucian carp can be caught on ordinary foam balls. Of course, this requires special equipment, because fishing with foam plastic is not practiced with an ordinary float rod, and technologically it is not feasible. The advantage of such a bait is that you can catch as many individuals as you like on one ball until the foam plastic flies off the hook, and if it flies off, then the loss is not great. Therefore, it turns out not very costly fishing. If you find a piece of foam, then you can pick a lot of these balls out of it. In this case, the foam of the lowest density is taken. It will not be possible to pick up balls from a denser foam.

Tackle for catching carp on foam plastic

Catching carp on a spring with foam: how to fit the foam

To catch carp on foam plastic, you will need a bottom tackle with a feeder in the form of a spring. Although many anglers believe that the “nipple” may be the most effective. The “crucian killer” tackle consists of several “spring” type feeders located one after the other, so this option will be considered.

Before casting the tackle, the spring is stuffed with bait, and foam balls are placed on the hooks. The result is that the pieces will be in the water column above the feeder due to positive buoyancy. The crucian carp will definitely become interested in the contents of the feeder and begin to eat its contents.

At the same time, when the crucian is feeding, the foam hooks are very close, since the length of the leashes can be only 5 cm. Having taken up the feeder, the crucian also swallows foam balls. As a result, the fish is on the hook. It is self-cutting under the action of the mass of the feeder. There are several versions of anglers on the reason that crucian swallows foam balls:

  1. The crucian is fond of eating the contents of the feeder and at the same time swallows a foam ball. It is difficult to say what the white ball reminds him of. It is possible that he sees a balloon in it and decides to swallow it in order to replenish his air reserves. There are also foam balls coated with a shell of various colors and smells. If the ball is similar to a pea or a grain of corn, then everything is clear: crucian carp will not refuse such a delicacy. Having swallowed such a ball, the crucian immediately finds itself on the hook of the fisherman.
  2. There is another opinion, which is based on the fact that crucian carp is still able to determine how edible the nozzle is. If everything is clear with multi-colored balls, since they can look like ripe peas, green peas, corn and can smell the same, then with ordinary foam balls, on the contrary, nothing is clear. Most likely, that the crucian, having determined that some kind of garbage is flying within its feeding place, which needs to be removed. In addition, this garbage interferes with normal feeding and the crucian takes this ball in its mouth and tries to move it away from this place. So he ends up on the hook.

Tooling

Catching carp on a spring with foam: how to fit the foam

Equipment for catching carp on foam plastic is sold at any fishing store. There are many varieties, up to the “crucian killer” rig. Other rigs, such as a “pacifier”, may be suitable for this purpose, but this is not for sale, as you can easily make it yourself. If you do not want to spend precious time on making equipment, then it is better to buy, especially if funds allow. Near each feeder spring there can be 2-3 hooks, although many anglers attach up to 6 hooks. If they are properly fixed, on short leashes, then they will not be able to get confused.

In order for the equipment to work correctly, it is necessary to properly fasten the leashes with hooks. Usually they are attached to both sides of the feeder. On a purchased feeder, the hooks may not be tied in the same way as they are needed for fishing with foam, so they will have to be moved to another place. The most important thing is that the length of the leashes does not exceed 5 centimeters. As practice shows, this is the optimal length of leashes for such gear.

Rod

Since this is a bottom tackle, it must be equipped with any rod, either spinning or feeder. Naturally, a feeder rod will cost much more. Many anglers still use old Soviet spinning rods with inertial reels. Unfortunately, they are not suitable for catching crucian carp, since you will often have to recast tackle, and it is difficult to determine bites on them. The fact is that the definition of bite is carried out by the movement of the tip of the rod. In this case, the softer the tip of the rod, the more sensitive the tackle, and the old spinning rods are very rough and hard.

Coil

For such fishing conditions, it is better to opt for a spinning reel. There are no special requirements for the coil, but it must be powerful, since you will have to throw a significant weight over a long distance. At least 50 meters of fishing line, 0,3 mm thick, should fit on the reel. Spool size 2500-3000. This will be enough.

Fishing line

Catching carp on a spring with foam: how to fit the foam

Despite the fact that there are mostly individuals that weigh no more than 150-200 grams, a fishing line thinner than 0,25 mm cannot be used. A feeder stuffed with bait can weigh up to 100 grams and when casting, a thinner fishing line simply cannot stand it.

Hooks must be attached to elastic leashes. It is better to use a thin white cord for this, although a fishing line with a thickness of about 0,15 mm will do.

Styrofoam fishing. Equipment for fishing on foam plastic. Bottom tackle. Fishing. Fishing.

How much foam to hook

Anglers who have heard that crucian is caught on foam plastic are also trying to catch, but at the same time they make one mistake. Clinging to a foam ball, they do not think that it, together with the hook, would be in the water column. As a result, the styrofoam ball is too small to lift the hook, or the hook is heavy and thick wire and the styrofoam ball is unable to lift it. Therefore, the hook, together with the foam, sinks to the bottom and the probability that the fish will bite is almost zero. Therefore, before casting the tackle, you need to check if the hook with the foam is sinking. It may happen that one volumetric ball will be enough, and sometimes you have to plant 2 or 3 small balls, in the form of a bead. To check, it is enough to throw the tackle into the water near the shore, where there is not much depth and the bottom is visible. If the hook with the ball rises and is placed in the water column, then everything is in order. If the hook does not come off the bottom, then you need to add foam or use another hook made of thin wire.

Fishing stores sell foam balls of any color and with any flavor. Because the styrofoam is wrapped, it does not have the same characteristics as regular white styrofoam. To use a purchased foam, you will have to use hooks with a long forearm and made of thin wire, since you will have to plant at least 2 or 3 balls. At the same time, balls of various sizes are sold, which allows you to choose balls for any occasion.

How the foam is put on the hook

Catching carp on a spring with foam: how to fit the foam

When the foam is put on the hook, the main condition is that the tip of the hook is always open. Moreover, regardless of how many balls are put on the hook. Under this condition, the fish will always catch on the hook. If this is not done, then the chances that the fish will be detected are very small. In this case, fishing may not be productive.

Catching crucian on polystyrene is that it is self-cutting. When he gets on the hook, he tries to leave, but the weight of the feeder does not allow him to do so. As a result, the hook thoroughly detects the fish, after which it will no longer be able to leave the hook. But she continues to try, which is evidenced by the movement of the tip of the rod. The fisherman can only start to reel in the fishing line, pulling the next crucian ashore. Since there may be more than one hook, there may be as many crucian carp. Therefore, foam fishing is very effective. The main thing is to choose strong, thin, but sharp hooks. As a rule, imported hooks of well-known companies have similar characteristics. Domestic hooks are not suitable for this kind of fishing.

Catching carp and crucian carp on foam plastic flavored

Groundbait use

Catching carp on a spring with foam: how to fit the foam

For a more active bite, when catching crucian carp, various types of bait are used. It can be both purchased, ready-made mixtures, and home-made. For those who do not want to stand at the stove and cook porridge, it is enough to buy bait in a fishing store. Moreover, it is not necessary to ask the seller something, since each package indicates which fish the bait is intended for catching. Of course, if you constantly buy bait in the store, then fishing can turn out to be “golden”. In this regard, many anglers practice self-preparation of bait.

Naturally, you need to know what should be the bait for crucian carp. In addition, the specificity of fishing on a spring requires bait, which has a special consistency. The fact is that the bait from such a feeder is quickly washed out. In this regard, you need to tightly ram the bait into the feeder. But this still does not guarantee effective fishing, since the bait should open after a while. Thus, a feeding spot will be formed, which will keep crucian carp at the fishing point. Therefore, each time it is necessary to throw tackle in the same place.

Many anglers do not particularly prepare baits with a large number of ingredients. They practice cooking porridge containing a couple of ingredients, or even made from one cereal, for example, pearl barley. At the same time, they do not stand at the stove, but steam barley in a thermos. This method is convenient because it does not have to spend a lot of time on cooking. Barley is poured with boiling water before going fishing. During the time it takes to get to the reservoir, barley is already ready for use. Near the reservoir, dry ingredients are added to it, for example, cake (cake) to bring the bait to the desired consistency. You can also get water here if needed.

In any case, if you make your own bait, it will be much cheaper, since most of the ingredients can be found in the kitchen.

If you look on the Internet, you can find a lot of a wide variety of recipes that do not contain scarce components.

Crucian on POLYFOAM!!! Catching crucian on the pacifier Tackle pacifier

Where else can polystyrene help out

Catching carp on a spring with foam: how to fit the foam

Fishing with foam plastic can be effective even in cases where fishing with classic baits does not give any results. As a rule, foam plastic is effective in reservoirs with a heavily silted bottom. What’s the matter here? But the fact is that, getting to the bottom, the feeder can gradually sink in the silt along with the nozzle. As a result, crucian carp simply will not notice them. Experienced anglers, knowing what’s the matter, twitch the rod from time to time, forcing the feeder and the hook with the nozzle to move at the bottom. The task can be greatly simplified if you use foam. It can be planted next to the main bait, and it will no longer sink in the mud. If everything is calculated correctly, then you can generally raise the baited hook above the bottom, which will make fishing productive.

Catching fish such as sabrefish requires the bait to be in the water column, as sabrefish do not feed from the bottom. She attacks the bait either at the moment when she slowly sinks to the bottom, or when she is in the water column. This is where styrofoam can come in handy too. The main thing is to plant such an amount of foam so that the hook can rise from the bottom and can be in the water column. Then you can guarantee bites and other fish, such as grass carp or silver carp.

Conclusion

Catching carp on a spring with foam: how to fit the foam

Fishing for crucian carp is an interesting, exciting and gambling activity. There is even a certain type of anglers who practice exclusively catching this fish. They are called “cutters”. But even the “crucian” not everyone knows that it can be caught on the foam, and those that know, claim that they do not bite the crucian on the foam. The reason for this is the wrong, outdated approach to the process of fishing. The main fishing gear for “karasyatnikov” is the usual float fishing rod and tackle, called “rubber band”. On hooks they put, basically, a worm and a maggot. The crucian never refuses such bait, although it prefers food of plant origin in summer.

Fishing with foam balls requires a completely different gear and a different fishing principle. The main tackle is a bottom fishing rod with a feeder. It can be a snap-in type “spring” or “nipple”. The principle of their operation is almost the same, but the design of the nipple is much simpler and more compact. They make a “pacifier” from an ordinary plastic cap from under the same plastic bottle, with a capacity of 3 to 5 liters. How it is done can be found on the Internet. Despite the simplicity of the design, it has an enviable catchability.

Going for crucian carp, it should be remembered that other fish, larger, if such is found in the reservoir, can also bite. There are reservoirs where only crucian carp is found, since other fish simply will not survive in such reservoirs, so you should not be afraid that a large fish will bite.

Leave a Reply