Catching carp for potatoes: preparing potatoes for fishing, gear, fishing techniques

Catching carp for potatoes: preparing potatoes for fishing, gear, fishing techniques

The easiest and most economical way to catch carp is to use regular potatoes as bait. Despite its availability, this method requires serious preparatory processes in order for fishing to be effective.

Carp fishing is one of the most interesting and exciting types of fishing. This is due to the fact that carp is considered a strong fish and a specimen weighing about 2 kilograms has serious resistance when playing. This circumstance attracts many fans of “hunting” for carp.

Preparing potatoes for carp fishing

Catching carp for potatoes: preparing potatoes for fishing, gear, fishing techniques

The most important thing is to choose a fresh root crop. Never use rotten, moldy or frozen potatoes. It should be a root vegetable with a pleasant smell.

Potatoes are boiled in their skins, without peeling. Cooking time depends on the size of the potatoes. In this case, it must be borne in mind that it should be a little damp. You can check the readiness with a knife or a toothpick. If the object enters the potato with little effort, then it is ready. Once ready, drain the water and allow it to cool. As soon as the potatoes have cooled, they are peeled, and then cut into cubes with sizes from 1 to 3 cm. It is not recommended to cut it smaller, since smaller individuals may bite, and this is not so interesting.

Finally, the cubes are fried on all sides in unrefined sunflower oil until golden brown. This process not only enhances the flavor of the bait, but also makes it denser, which allows it to stay on the hook for a long time. In this case, the frying process should be controlled, otherwise the cubes may burn.

So that the bait does not lose its properties, it is placed in a jar with a tight-fitting lid. As a rule, the nozzle is harvested one day before leaving for fishing.

How to cook potatoes for fishing.

Groundbait preparation

For greater effectiveness of fishing, it is necessary to lure a place to collect a sufficient number of fish at one point.

To lure a carp to a fishing spot, it is better to use his favorite corn, which he simply loves. Corn grains are selected very carefully, with emphasis on its integrity and freshness. Before cooking, corn is soaked for a day, or even two. It is boiled in a large amount of water for at least 4 hours. After readiness, the water is drained, and the corn is placed in a hermetically sealed container.

In addition to corn, you can feed carp with other, no less attractive ingredients, such as makuha, halva, as well as various cereals. The easiest way is to use purchased baits. Shops and fishing departments have a wide range of dry, ready-to-use bait mixtures for catching any kind of fish, including carp. It is enough to add the required amount of water to the dry mixture and stir. It is better to dilute the bait with water from the reservoir where fishing will be carried out.

Tackle for carp fishing for potatoes

Catching carp for potatoes: preparing potatoes for fishing, gear, fishing techniques

Since carp is a rather shy and cautious fish, it does not come close to the shore. Therefore, in order to catch him, you should make long casts using a feeder rod, at least 2,2 meters long. It is better to take a braided line, with a margin. As a rule, at least 100 m of fishing line is wound on the spool. The diameter of the line is chosen so that it can withstand long casts with a heavy feeder.

As leads, it is better to use lead material or use yellow nylon thread, about 0,15 mm thick. The nylon thread is softer, which means it will not alarm the fish.

Hooks are selected only classic, carp with a short forearm. If we take into account the European classification, then these will be hooks No. 3, and if domestic, then hooks No. 12. The sinker is taken like a “bomb” with a soldered swivel. The weight of the sinker can be in the range of 70 g or more.

A carabiner is attached to the end of the main line, and a piece of the same line, about 30 cm long, is attached to it. A nipple tube is put on a piece of line. The diameter of the tube must be such that a load moves along it, which is attached with a swivel. 3 swivels are attached to the other end, moreover, in such a way that the fastening falls on the middle swivel. Leashes with hooks, 15-20 cm long, are attached to the first and third swivel.

Nozzle boiled potatoes. How to plant potatoes for fishing.

Where to catch carp for potatoes

Carp prefer to stick to deeper places where the bottom is strewn with barnacles, which are excellent treats for carp. A similar place can be easily found if you stretch a lure along the bottom. If a shell was found on the tee, then this place can be considered promising.

Then you need to start feeding the carp. For this, the following is done:

  • Basically, carp are caught in ponds with stagnant water, so bait can be brought on a boat and scattered around the place where the nozzle will be thrown. If there is no boat, then you can roll balls with a diameter of 10-15 cm and throw them at the fishing point. There are other ways to deliver bait to the point of the intended fishing.
  • If fishing is carried out in the current, then the bait must be cast at a distance of 20 m upstream from the intended fishing site. How this will be done depends on the choice of the fishing enthusiast.

Technique for catching carp on potatoes

Catching carp for potatoes: preparing potatoes for fishing, gear, fishing techniques

As a rule, the technique of catching carp for potatoes is not difficult, it is enough to stock up on patience and endurance.

The method of catching potatoes includes the following operations:

  1. As soon as the place is fed, you can start casting the main gear. But before that, you need to make an audit of the tackle (if this has not been done in advance) for scuffs, knots, etc.
  2. After the tackle is recognized as serviceable after inspection, the bait is baited. Both hooks are inserted into the potato cube in such a way that they are not visible. In this case, you need to make sure that the cube does not fall apart into small pieces.
  3. With a smooth and precise movement of the rod, the nozzle is thrown into the fishing point.
  4. After casting, the rod is placed on the stand, and the bite alarm (if electronic) is set to the bite waiting mode.
  5. Carp does not take the bait at once. He sucks it in slowly but surely. Therefore, if a bite is noticed, then there is no need to immediately carry out any cuttings. You need to wait a bit until the carp swallows the bait as deep as possible.
  6. Carp, sensing a foreign object, will try to spit it out. Given that he has two hooks in his mouth at once, it is very difficult for him to do this. The result of his actions is self-locking. After that, the carp will try to go to the depth.
  7. At this point, you should make a light, control cutting, after which you need to start playing a large specimen. As a rule, only large individuals are caught on such cubes. In this case, you need to constantly keep the fishing line in tension. If this is a large enough specimen, then it will have to be tired by constantly releasing the fishing line. But this does not mean that he needs to ensure complete freedom of movement, as he will immediately pull the tackle into snags or dense vegetation.
  8. You can not take a carp with your hands, especially a large one. A landing net should always be in the carp angler’s arsenal. Only he can guarantee the complete hauling of the carp.

Catching carp for potatoes: video

In addition to potatoes, carp can be caught with other types of baits. The so-called boilies are widely used, giving good results. After watching the proposed video, you can make sure that potato cubes work no worse than boilies and other nozzles.

Fishing. Catching carp on boilies and peas. in with. Cellars. carp fishing

Leave a Reply