Best Vibratory Pumps 2022

A vibration pump is a subspecies of a submersible pump: it is completely immersed in a liquid and suspended on a cable. Power is supplied to it via a rubberized cable, water goes up through an armored hose. The design does not have an electric motor and an impeller, however, such a simple device regularly pumps water from any reservoir, well or well. This type of pump is relatively inexpensive.

Top 10 rating according to KP

Editor’s Choice

1. QUATTRO ELEMENTI Acquatico 260-10 (price: from 1 rubles)

The diameter of the pump is 120 mm, it copes well with the supply of water from wells and wells. Aluminum alloy body will not corrode. The unit is equipped with overheating protection. The upper water intake prevents sand and clay from entering the working chamber.

Features

Advantages and disadvantages

2. PATRIOT VP-16В (price: from 1 rubles)

The main difference from the previous model is the case diameter of 100 mm. This allows you to pump water from wells with a smaller pipe diameter. Other technical characteristics are similar, but the pressure is noticeably higher.

Features

Advantages and disadvantages

3. BELAMOS Cricket BV-V-50 (price: from 2 rubles)

Reliable and easy to maintain unit. The long electric cable included in the kit allows you to connect to the network without an extension cord. Models with upper and lower water intake are available.

Features

Advantages and disadvantages

What other vibration pumps are worth paying attention to

4. Vortex VN-10N (price: from 2 rubles)

Productivity is high, the upper water intake cuts off sand and dirt. Reliable thermal protection saves the unit during long-term operation. Users note the quiet operation of the device.

Features

Advantages and disadvantages

5. LEPSE Aquarius-3 10 m (price: 2 rubles)

The lower half of the pump housing is made of rubber. This reduces vibration and prevents damage when lowering into a deep well. The kit includes a steel cable for suspension. Maintenance is simple, no special tools are needed for disassembly.

The pump is equipped with a well-thought-out protection system. The engine stops not only when overheating, but also when the hose is bent or the working chamber is clogged.

Features

Advantages and disadvantages

6. Livgidromash Malysh-M (price: from 1 rubles)

An economic and unpretentious pump with the top liquid intake. The winding of the electromagnet is made of copper, so it works for a long time without overheating. The silumin case perfectly protects the internal parts from damage. Moreover, it also does not rust.

Features

Advantages and disadvantages

7. UNIPUMP BAVLENETS-M BV 0,12-40-U5 (price: from 3 rubles)

Economical pump with stainless steel casing and waterproofing to IP68. Available in two versions with top or bottom intake. There is enough pressure to supply water to a three-story house with a storage tank in the attic.

Features

Advantages and disadvantages

8. Technopribor Brook-1 (price: from 2 rubles)

The compact unit in an all-metal housing raises water to a height of 60 m. The upper liquid intake protects the working chamber from contamination. There is thermal protection.

Features

Advantages and disadvantages

9. JILEX Poplar Malysh-M 16 m (price: from 2 rubles)

The pump is domestic, produced in Livny. Spare parts for it can be bought in all cities of the country. The diameter of the steel body is only 9,8 cm, it passes even the narrowest wells. Level of hydroprotection of the body IP68. Starts to work at water temperature from +1 degree Celsius.

Features

Advantages and disadvantages

10. Bison ZNVP-300-10_M2 (price: from 2 rubles)

The pump is unpretentious and reliable. Differs in low energy consumption. Up to 200 hours of continuous use, double that of other models. The upper water intake prevents clogging of the working chamber. Permissible size of solid particles in water up to 2 mm.

Features

Advantages and disadvantages

How to choose a vibration pump

The power unit of any vibration pump is an electromagnet consisting of a U-shaped steel core with a copper wire winding. An alternating current with a voltage of 220 V is supplied to it. As a result, an electromagnetic field with a frequency of 100 Hz is created. The core and coil are insulated with epoxy to prevent water penetration.

The armature under the influence of an electromagnetic field moves in the coil, then returns to its previous position. The movements are small, resembling vibration. They are transferred to a rod with a rubber washer installed at the opposite end, which plays the role of a piston. The performance and durability of the entire unit depends on its quality. The rod together with the piston vibrates inside the injection chamber, sucking water from the source and squeezing it out.

Liquid enters the chamber through check valves at the bottom of the housing. They do not allow water to be squeezed back, leaving it one way – to the outlet pipe. The device has practically no moving parts that require periodic maintenance or preventive maintenance.

Despite the commonality of the design, specific types of pumps differ greatly in their characteristics. Healthy Food Near Me turned to the online hypermarket expert Maxim Sokolov for help in choosing the device you need.

When choosing a submersible vibration pump, you need to pay attention to the following parameters:

• Performance shows the volume of water that the pump is able to pump per unit of time. For a preliminary calculation of the required value of this indicator, there are special tables. They take into account the number of water flow points in the form of sprinklers or sinks in the house, plus the debit of the well indicated in her passport. The minimum sufficient to ensure irrigation and the daily needs of summer residents is 360 l / h. A country house will need 1500 l / h. There are models that can provide twice as much productivity, up to 3000 l / h. Do not use a pump with a capacity greater than the flow rate of the well. This will lead to its periodic drying and washing out of clay particles, which will quickly disable the pump.

• Head characterizes the distance to which the pump is able to deliver water. This indicator varies from 40 to 90 m. To calculate, it is necessary to add up the immersion depth, the distance between the surface of the water in the well and the ground level, the length and height of the water supply to the end points of flow. And then add another 20% to the resulting value. The pressure is never too much. The outside diameter of the body must be smaller than the inside diameter of the well casing.
  
• Thermal protection necessary in order to ensure that the pump is turned off when the water source is drained. In this case, the electromagnet coil will fail due to overheating.
  
• Also desirable dry run protection, that is, turning on the pump in the absence of water.
  
• Water intake location. The pump inlet can be located at the top or bottom of the casing. In the first case, sand and clay from the bottom will not get into the water; such pumps are good for supplying water from wells and open reservoirs. They must be installed at a distance of more than 30 cm from the bottom. The second type of design is most often used in borehole pumps, because it allows to reduce the size of the casing to a minimum. But a minimum of a meter of water-filled well below the inlet filter is required.
  

A vibration pump is a reliable and simple unit that will supply your home or cottage with water without undue cost and effort. The correct choice and observance of the operating instructions is a guarantee that it will work for more than one year.