Contents
- Top 10 rating according to KP
- Editor’s Choice
- What other tile cutters are worth paying attention to
- How to choose a tile cutter
The tile cutter is designed for cutting ceramic tiles and porcelain stoneware. It can be used for independent work and regular sawing of workpieces. Not a single repair in which you decide to tile the floor or walls with tiles can do without this tool, since the blanks need to be shaped. A good device should cut with a minimum number of chips, and preferably without them at all, be powerful, stable and safe. KP has prepared an overview of the best tile cutters that are commercially available in 2022.
Top 10 rating according to KP
Editor’s Choice
1. MTX 87688 (from 3600 rubles)
This device belongs to the rail class. The brand is , however, the tile cutter is made in China. Designed for cutting tiles, including large squares. The bed is made in a traditional form factor, made of aluminum alloy. This made it possible to slightly reduce the weight of the tool, but it is still heavy – more than seven kilos. A special coating is applied to the rail, which increases the reliability of the adhesion of the rail and the ball mechanism. Buyers of this tile cutter note a reliable grip. The handle has an overlay in the form of a palm, due to which a confident grip is ensured. Regarding the strength of the tile cutter units, we did not find any complaints in the process of preparing the review. The model is equipped with an I-rail, which is a guide rail. The carriage clamps it on both sides and moves with the help of a ball bearing.
Features: support surface length 600 mm, weight 7,35 kg
Advantages and disadvantages
2. Wester PLR450 (from 4600 rubles)
A bright electric tile cutter in an orange body that vaguely resembles a record player. According to the manufacturer, he quickly and accurately deals with ceramic tiles. The discs can be used for dry and wet cutting. It is worth noting the successful form of this instrument. It’s compact and doesn’t weigh that much. The case has a built-in carrying handle. There are four rubber feet on the bottom for a secure fit. There is a wire compartment. Included with it are a metal parallel stop and a protractor nozzle, using which you can achieve increased accuracy in cutting the plate. The buttons are protected by silicone pads from moisture and dust. The riving knife is protected by a safety cover. It is a pity that, due to the low power, the device cannot be mastered by porcelain stoneware.
Features: power 450 W, disc diameter 115 mm, bearing surface length 360 mm, weight 3,7 kg
Advantages and disadvantages
3. ZUBR EP-200-1000N (from 7300 rubles)
A popular domestic brand of tools has in its arsenal a device worthy of mention in the ranking of the best tile cutters of 2022. The device has an asynchronous motor that does not need to be serviced. It copes not only with floor and wall tiles, but even paving and facing tiles. In general, this device is not only for home repairs, but also for finishing the territory of cottages and city buildings. The table is 50 by 40 cm, made of galvanized stainless steel, which means that it is not afraid of corrosion. It has no sides, which means you can put workpieces of a larger diameter. To keep the disc cool, there is a water tank. The saw blade is covered with a casing during operation to protect the master from sparks and stone fragments. The operator has access to different sawing modes: not only at 45 degrees, but also oblique, as well as combined.
Features: power 1000 W, disk diameter 200 mm, weight 15 kg
Advantages and disadvantages
What other tile cutters are worth paying attention to
4. Bort BHK-110-S (from 1900 rubles)
This stone saw can also cut tiles, concrete blocks and other hard materials. The tool has a solid sole, so it can be used as a furrower – to ditch grooves on a wall or ceiling. In this tile cutter, you can set the angle and depth of cut. It is also convenient that it does not need to be kept on weight, like a traditional grinder. So you get tired less, more work efficiency and quality of cut. The manufacturer puts an adapter ring for diamond discs in the kit. With it, you can put not only the base 110 × 20 mm, but also a slightly larger 115 × 22,2 mm. The box contains two keys and an extra set of brushes. Please note that in stores there is a batch that does not have a 45-degree turn. This is not a marriage, but a significant inconvenience. Although the manufacturer officially states that if you do not have this function, then the device can be exchanged.
Features: power 1200 W, disk diameter 110 mm, weight 3,2 kg
Advantages and disadvantages
5. Engy ETC-3000 (from 2800 rubles)
This is a Chinese tile cutter with a quality certificate. In general, the company produces everything in a row and usually, there is not much confidence in such things. However, this tool is worthy of mention among the best – this is evidenced by customer reviews. The device can be called compact. The device works from the socket. This way you can cut ceramic tiles up to 3,4 cm thick. Its engine is not the most powerful – only 450 watts. Although competitors have long been giving out two to three times more. But the kit comes with a good diamond disc with a diameter of 180 mm. The model has a bath for water. It is designed for wet cutting. This method helps to reduce the number of chips, increases the working life of the disc and reduces the formation of dust. The tile cutter has a 45 degree tilt function. A ruler is built in, with which the material is more evenly located, and the cut is made strictly in size. Management is simple, plus the device is quite mobile.
Features: power 450 W, disc diameter 180 mm
Advantages and disadvantages
6. ELITECH PE 450 (from 3500 rubles)
This tile cutter is designed for desktop placement. A small tool does a great job when laying tiles at home. The cutting depth here is up to 23 mm – this is not the coolest indicator, but for many works it will be enough. The device stands on supporting legs that prevent slipping. Like the previous device on our list of the best tile cutters of 2022, this one has a protractor and rip fence. It looks like a suitcase with a carrying handle. The tilt can be adjusted from 0 to 45 degrees. There is a water tray to apply a wet cut. Able to turn itself off if it detects low voltage in the network. Its design is so thought out that the device is able to cope with workpieces of any size. Copes with porcelain stoneware.
Features: power 450 W, disc diameter 115 mm, bearing surface length 310 mm, weight 3,9 kg
Advantages and disadvantages
7. STAVR PES-180/600 (from 3400 rubles)
Another tile cutter from a company, but made in China. He is electric. On the working table of the device there is a millimeter scale, which helps to position the workpiece with high accuracy. The manufacturer resorted to classic security measures, such as protecting the disk with a casing. There is also a rare, but a solution is needed: a magnetic switch. If during the work the electricity is cut down, the operator may forget to turn off the device. When the power supply is restored, the device will not turn on by itself. You will need to click the toggle switch again. Due to the design of this device, the length of the tile cut is not limited in any way. Other features of this top tile cutter 2022 include miter cuts, rip fences and miter stops. The assembly is decent, nothing backlash and does not stagger. There is a tray with water. The tool is easy to operate – even a beginner will get used to it.
Features: power 600 W, disc diameter 180 mm, bearing surface length 360 mm, weight 8 kg
Advantages and disadvantages
8. Battipav Super Pro 900 (from 25 thousand rubles)
This is a tile cutter from an expensive Italian brand of construction tools. Able to perform straight and diagonal cuts. It will master not only tiles, but also porcelain stoneware with the proviso that the thickness of the workpiece should not exceed 19 mm. The base is wide, which makes the tool stable. Cuts away from the operator, which is a plus in terms of safety. Yes, and it is more convenient to push away from yourself than towards yourself. As a result, it has a rigid monorail for professionals. The design has nine ball bearings, some of which can be adjusted in terms of sliding and improve accuracy. And due to the multiple structural elements, the carriage does not jam from construction dust. Designed for a long service life. We recommend it for purchase to construction crews. This tile cutter is quite heavy – 22 kg, you can’t carry it far alone. It is a pity that the manufacturer did not take care of the bag or case for the device.
Features: cutting length 900 mm, weight 22 kg
Advantages and disadvantages
9. Storm! TC9820L (from 8000 rubles)
Well-known German brand of professional tools. This device is designed for cutting tiles with a diamond blade. The table of the device is chrome-plated, it can be tilted to perform complex shapes. You can cut both at a right angle and make a slope of 45 degrees. There is a parallel stop made of aluminum, which increases the accuracy of work. This also contributes to the ruler, with which you can work without additional markup. The disc is protected by a casing, however, it is not the best and limits the viewing angle. The heart of the device is an asynchronous motor. We talked about him a little when we talked about another tile cutter from the ranking of the best for 2022. In short, he is not whimsical to service. The whole device is disassembled, which is important for easy cleaning. In the reviews, buyers note that when working with water, you need to lay a rag or rug, otherwise everything will be wet.
Features: power 1000 W, disc diameter 200 mm, bearing surface length 500 mm, weight 11,6 kg
Advantages and disadvantages
10. DeWALT DWC410 (from 11,5 thousand rubles)
Another European manufacturer of tools, which is highly regarded among professionals. This tile cutter is able to accurately cut not only ordinary tiles, but will take artificial stone, paving slabs, marble, granite and glass. Is this necessary in everyday life? Good question: on the one hand, it is universal, and on the other hand, it is more of a professional tool. Angle adjustment is carried out up to a mark of 45 degrees without additional tools. The diamond disc can be cooled with water. Maximum cutting depth up to 34 mm. The spindle can be locked at the push of a button and tooling can be changed. The tool works when the button is held down, however, it can be locked to free your hands. The handle has a soft grip for operator comfort. Quick access to carbon brushes available.
Features: power 1300 W, disk diameter 110 mm, weight 3 kg
Advantages and disadvantages
How to choose a tile cutter
We talked about the best tile cutters available for sale in 2022. How to choose the right device, consult Kirill Galayda, Senior Specialist of the Machine Tools and Garage Equipment Sales Department at VseInstrumenty.ru.
Manual tile cutters
They are also called mosaic. They have the form of pliers with a sharp tip made of hard metal or artificial diamond. Only suitable for thin tiles. On average, they cost up to 500 rubles. The most popular model is Vira 810 002.
Mechanical tile cutters
They are a platform with a carriage and a lever under which tiles are laid. They work with most materials, but overall machines for large tiles are inconvenient when working with thin tiles. The cost, depending on the size and functions, is from 600 to 30 thousand rubles. The popular MTX PROFESSIONAL 700 mm tile cutter costs about 5000 rubles.
Electric tile cutters
They work due to the engine and the cutting disc, which cuts through the material. It is important to use high quality diamond blades. To remove dust, a vacuum cleaner is connected to the machine or water cooling is used. Popular manufacturers Helmut, Fubag, Caliber produce tile cutters with an average cost of about 25 thousand rubles.