Self-diagnosis of the LG washing machine shows an AE or AOE error on the display – the error code that appears may indicate problems with shutdown. Having deciphered the full meaning of the error, you will understand how to fix it at home.
Note that the fault code is on the display of the washers with a screen.
Meaning and troubleshooting
What does the AE error code on LG washing machines mean: the machine stops working due to auto-shutdown problems. The float sensor may have tripped.
What to do and how to fix breakdowns:
- Rule out failure of the control module. Turn off the washer from the network for 15-20 minutes to remove the A0E error. After the reboot, CM LJ can work normally. The reason for the frequent “freezes” of the system is excessive humidity in the room where the washer is installed.
- Some LG washing machines are equipped with Aquastop mode, which protects against leakage. It is necessary to check all the fasteners and connections: maybe some hose was disconnected during the rearrangement, so the washer leaks and the float sensor works.
If the error reset does not happen, the cause is a breakdown that requires repair. You can solve the problem yourself, at home, if you carefully check all the details.
Causes and repair of a malfunction
Here are the reasons why the Lji machine can give an AE error. You will understand how to troubleshoot.
- If during washing the machine stops and gives out the AE code, there is probably a problem with the control board or processor. Check: in case of violation or burnout of the elements, clean the tracks, solder the contacts. If a processor failure occurs, the display module will have to be replaced.
- Washing machine with Aquastop protection leaks, there is water in the tray, then a fault code is displayed. It is possible that the rubber cuff is not performing well due to damage or fungal attack. In rare cases, the cuff can be glued, but it is safer to completely replace it. The nozzle or tank of the machine may also be damaged, they should be replaced.
- The Aquastop system makes a click, the tray is empty, the fault code is on. What does it mean: the protection system is out of order. Depending on the situation, it is possible to repair or completely replace the protection.
If it didn’t work out on your own to remove the AE error on an LG (LG) typewriter, don’t be discouraged. Contact a service center where a qualified technician will help you.