Contents
Cracked washing machine hatch glass needs to be replaced. Even if there is no leak yet, it is better not to take risks and carry out repairs, because temperature changes can cause the glass to burst. It is advisable for every user of washing machines to know the main causes of the problem and the replacement steps.
Why did the glass of the CMA door crack?
Important! Do not start equipment with damaged glass. Even a small scratch can turn into a deep crack. If the glass breaks as a result of vibration, it will damage the drum and the internal parts of the AGR. In addition, the room will be flooded with water, which is especially dangerous when washing at high temperatures.
Some sites recommend sealing the glass of the hatch. Do it or not – it’s up to you. But first weigh the possible consequences.
Here are the main causes of door damage:
- Incorrect placement of equipment. Installation in a tight space results in constant knocking against other objects when the door is opened. As a result, the outer glass may fail and break.
- Drum overload. With each wash, the hatch can withstand heavy loads. This is the supply of water under pressure, and constant temperature changes from cold to hot. Add to this the overload of linen, and the glass will not withstand the pressure.
- Foreign metal objects in the drum. Even a small part at a high spin speed can cause serious damage. Therefore, carefully check the pockets before loading.
- Manufacturing defects. The problem is typical for new technology. At the time of purchase, inspect the components of the machine. On a smooth and transparent surface of the hatch there should be no chips, scratches, air bubbles.
- Drum clearance. Bearing wear leads to uncontrolled movement of the tank. The laundry comes into contact with the door more and more often, exerting double pressure.
Understanding the causes helps prevent breakdowns. But what if the glass has already broken? Calmly, it is possible to replace the element at home.
How to dismantle and replace the old part?
Do not rush to buy a new spare part before starting the repair. Brands and models of washers “Samsung”, “Ariston”, “Kandy”, “Zanussi” have a different shape, thickness and diameter of the glass. Therefore, dismantle, and then select a suitable replacement on the Internet. Or go to the store with the old part and choose an analogue.
Dismantling steps:
- Disconnect the equipment from the mains, close the water inlet valve.
- Open the door and remove it from the hinge. To do this, unscrew the two fixing bolts with a Phillips screwdriver.
- Lift the door and set aside.
- Place the item on a flat surface.
- Unscrew the screws around the perimeter of the plastic panels.
- Using a flathead screwdriver, pry out the latches between the two parts and separate them.
Now you can freely remove the glass that has broken and buy a new spare part.
Be very careful not to hurt your hands. To replace a part, do this:
- Insert the glass into the slots.
- Cover the bottom of the door with the top.
- Fasten the latches and tighten the screws.
- Check if the elements are securely installed.
- Screw the hatch to the body of the washing machine.
The work is over, now feel free to operate the machine, not forgetting to follow these rules:
- Carefully inspect things, removing objects and coins from pockets. Immerse linen with sewn decor in special bags in advance. This will protect both equipment and clothing from damage.
- Do not overfill the drum with laundry. Remember that wet things become even heavier.
- Place equipment in a stable position, leaving enough space for the hatch to open normally.
As you can see, in order to keep the details of the washer intact, it is enough to follow common sense. Video will help to disassemble the hatch:
How to buy new glass?
You can buy the item on various websites of online stores. It is enough to know the make and model of the machine in order to select the appropriate element for replacement. For example, by studying different portals, you can find a worthwhile option. So:
- Zbt parts offers to buy separate glass only for the brands Veko, Electrolux, Gorenje. It is possible to purchase a complete hatch assembly for the Indesit, Bosch, Candy models.
- Service Master has a wide range of glasses for any SMA brands, including LG, Ariston, Vestel, Mile, Bloomberg, AEG, Whirlpool, Zanussi, Ardo.
- The TIU website also offers a good range of glasses in various shapes and sizes.
- Arlos sells a similar product a little more expensive, but promises free shipping.
Take note of the recommendations in order to avoid problems with machine breakdowns and repairs in the future. It is much easier to follow the rules of operation than to look for spare parts and spend money on repairs later.