22 best electric convectors: ranking 2022 – 2023

Эelectric convector – a device with a heating element in a hollow body. The principle of operation is based on heating the incoming air and its output into the room at a certain angle.

After cooling, the air flow enters the convector again, and then it exits heated, and so on until the required temperature is reached.

After studying the article, you can easily choose the appropriate option from the proposed TOP or find the best solution from the offers available on the market.

Types of electric convectors

There are two types of electric convectors on the market:

1. Ceramic. They are distinguished by a surface made of ceramics. They have good heat capacity and fast heating compared to conventional devices. In parallel, the cooling time of such a device is increased and can reach 30 minutes. This is a positive point when using a thermostat, because there is no need for frequent on / off.
2. Ordinary. This group includes standard models in which the heater is in a metal casing. Such devices stand out with a high heating / cooling rate, and have a more affordable price.

Design features

Before buying an electric convector, pay attention to its design.

From this position, they are divided into several groups:

1. TENovye. Equipped with a heating coil hidden in a hollow tube. The outer part has a ribbed structure to improve work efficiency. Such devices can easily cope with tasks in wet rooms. Of the minuses – a slight crack during operation, low efficiency and a longer heating time.
2. Tape / spiral. They have the most affordable price, heat up quickly, but are less reliable. During operation, the air is dried and oxygen is burned.
3. Monolithic. The heating element (filament) is located inside an aluminum ribbed housing having an X-shaped shape. They stand out for improved heat exchange, high efficiency/reliability and save money on electricity bills. Units with these heaters are generally IP water resistant.
4. Needle. A modern type of electric heater, where nichrome loops are inserted into the dielectric bar. These devices heat up quickly. Like belt/coil models, they dry the air and reduce the amount of oxygen, but to a lesser extent.

By way of installation

When choosing an electric convector, you need to pay attention to the way it is installed.

In particular, the following types of devices are distinguished here:

1. Floor. Equipped with feet, wheels or other supporting elements that allow the device to be placed directly on the floor. Favorably distinguished by simple installation, configuration and the ability to move. The downside is that such devices take up more space, and also interfere with moving around the room (there is always a danger of a collision).
2. Wall. It is fixed on a vertical surface with screws, hooks and other devices. This installation method is inconvenient in that you need to prepare a place, carry out work on supplying power, etc. At the same time, putting the device in the center of the room will not work. The main plus is saving space on the floor, which is especially important in a small room.
3. Universal. They are distinguished by the possibility of installation on the floor using wheels / legs or hanging on the wall using special brackets. Have pluses/minuses of the types considered above.

Built-in or removable thermostat

An important point when choosing an electric convector is the placement of the thermostat.

It can be built into the device or have a removable character. It is intended for optimization of heating and maintenance in the room of the set temperature.

Other features of the choice can be read after the rating of the best models.

Management

According to the control method, electric convectors are of two types – with mechanical or electronic control.

Mechanical

They stand out for their simplicity and reliability. In such devices, it will not be possible to fine-tune, because all operations are carried out “by eye”. The average accuracy is up to 5 degrees Celsius.

Rotary knobs are used as controls. Most often, mechanically controlled models have a limited set of functions.

Electronic

They are distinguished by greater accuracy, which ranges from 0,1-1 degrees Celsius, taking into account the class of the model. Of the minuses – a higher price.

Control is carried out using buttons, and the devices themselves are most often equipped with several heating modes and a screen for displaying information.

The newer ones include expensive models with a sensor unit, which is more aesthetically pleasing, but has classic functionality.

The presence of electronics allows you to program the device, which expands the functionality and simplifies the use of the device. For convenience, many models are equipped with a remote control, which is especially important when mounted.

Thanks to a more precise setting of electronic electric convectors, they save up to 5% of electricity.

The best inexpensive electric convectors

The low-cost class includes models with low power up to 2,5 kW and limited functionality. They are more suitable for heating small rooms, certain residential areas of a house, cottage or apartment.

They are considered the best solution for most buyers who do not put forward serious criteria for such a product.

7. RESANTA OK-1700

The peculiarity of the convector is the effective combination of convection and heat radiation, simple and reliable control and high precision thermostat.

The device is characterized by high efficiency, quickly heats up the room and pays for itself in a short time. The model complies with international standards, but is adapted to work in Russia.

The heater does not burn out oxygen and does not overheat, which increases the level of its safety during use.

1. Heating area, m² – 17.
2. Power, kW – 1700.
3. Management — mechanical, rotary.
4. Heating element type – standard heater.
5. Installation – on the floor / wall.
6. Dimensions, m – 0,4×0,46×0,08.
7. Weight, kg – 5.
8. Warranty, years – 5.
9. The country of origin is China.
10. Features – power control, indicator light, wheels, shutdown when heated.

The device is provided with wheels for movement and fastening. The cost is 3890 rubles.

1. Quiet and compact.
2. High efficiency.
3. Moisture protection.
4. Economy of energy consumption.
5. Does not burn oxygen/dust.
6. Low price.
7. Convenient wheels for moving.

1. More suitable for small spaces.
2. Wide legs.
3. Great weight.

The RESANTA OK-1700 model is an excellent solution for a home or office space in terms of price and quality. Deservedly located on the 7th line of our rating.

6. Ball BEC/SM-1000

Silent and economic electric heater for different types of rooms. Equipped with a monolithic heating element with a 25-year service life.

It features an enlarged air intake device, a modern convection system. It has a simple control in the form of a start button and a temperature controller.

There is a sensor that monitors the temperature and turns off the device when overheated.

1. Heating area, m² – 15.
2. Power, kW – 1000.
3. Management is mechanical.
4. Installation – floor / wall.
5. Dust and moisture protection class – IP
6. The heater is X-shaped monolithic.
7. Dimensions, m – 0,4×0,46×0,084.
8. Weight, kg – 3.
9. Warranty, years – 3.
10. Country of manufacture – Russia.
11. Features – power on indication, overheating / rollover shutdown, moisture protection.

The set includes feet for installation on the floor.

The cost is 4100 rubles.

1. Compactness.
2. Stylish design.
3. Simple construction.
4. Overheat protection.
5. Thoughtful foot placement.
6. Long heat retention.
7. Mobility.
8. Enlarged air intake.
9. Stability.
10. Uniform distribution of heat throughout the room.
11. Practicality.
12. Light indicator on the switch.
13. High quality and uniformity of heating.
14. Absence of extraneous sounds.
15. Possibility of wall mounting.
16. Availability of the thermostat.
17. Ease of installation.
18. Moisture protection.
19. Sophisticated control panel.
20. Does not burn oxygen.

1. Enough power for a small space.
2. No thermostat calibration.
3. Weak fastening of the legs, which break when removed frequently.
4. No wheels to move.
5. Average build quality.

Ballu BEC / SM-1000 is a good electric convector made in a classic design with legs included, durable and easy to operate. It occupies the 6th line of our rating.

5. Scarlett SCA H VER6 1500

A simple electric convector made in a classic design and equipped with a band heater. It has two stages of power regulation, is protected from overheating and is intended for installation on vertical / horizontal surfaces.

1. Heating area, m² – 15.
2. Power, kW – 1500.
3. Management is mechanical.
4. Type of heater – needle.
5. Installation – on the floor / wall.
6. Dust and moisture protection class – IP
7. Dimensions, m – 0,51×0,33×0,175.
8. Weight, kg – 1,8.
9. Warranty, years – 1.
10. The country of origin is China.
11. Features – shift knob, temperature control, thermostat.

Included with the device itself are legs for installation on the floor. The cost of the model is about 2190 rubles.

1. Reliability.
2. Stable legs.
3. Small weight and dimensions.
4. Fast heating.
5. Convenient temperature/power adjustment.
6. Low price.

1. Minor build defects.
2. More suitable as a device for additional heating.

The Scarlett SCA H VER6 1500 is a light and compact model with easy adjustment and adjustment. Suitable for heating any room. It occupies the 5th line of our rating.

4. Hyundai H-HV16-10-UI620

Electric convector with a monolithic heating element with the possibility of mounting on the wall and ceiling. Has the first class of protection against moisture, the mechanical thermostat of high durability and two modes of heating. It stands out for its author’s design and high work efficiency.

1. Heating area, m2 – 13.
2. Power, kW – 1000.
3. Management is mechanical.
4. The type of heating element is monolithic.
5. Installation – on the floor / wall.
6. Dust and moisture protection class – IP
7. Dimensions, m – 0,4×0,46×0,08.
8. Weight, kg – 3.
9. Warranty, years – 1.
10. The country of origin is China.
11. Features – shutdown when heated.

Together with the electric convector itself, the set includes legs for floor installation. Price — 3374 rubles.

1. The optimal solution for additional heating.
2. Little energy consumption.
3. Cools down quickly.
4. Heats up a 14 sq. meters in 3 hours.
5. Silence.
6. Compact size and light weight.
7. No burning smell.
8. Doesn’t dry out the air.
9. Wall mount available.
10. Low price.
11. Stability when installed on the floor.
12. Stylish design.
13. High build quality.

1. Increase in electricity costs.
2. Inconvenience of transportation.
3. Burns oxygen.
4. Poor description in instructions.
5. There is no carrying handle.
6. High case temperature.

Model Hyundai H-HV16-10-UI620 is a universal heater with the ability to mount on the wall / install on the floor, with high build quality and safety of use. By right it is on the 4th place of our rating.

3. Hyundai Loft H-HV18-15-UI1322

Ultra-thin electric convector with original 3D design. It has a unique stitch type heating element, the possibility of floor and wall installation and three heating levels for choosing the right option.

Changing the mode is carried out using mechanical control, there is an indication of work.

1. Heating area, m2 – 15.
2. Power, kW – 1500.
3. Management is mechanical.
4. Type of heating element – needle.
5. Installation – on the floor / wall.
6. Dust and moisture protection class – IP20.
7. Dimensions, m – 0,59×0,4×0,08.
8. Weight, kg – 4,8.
9. Warranty, years – 1.
10. The country of origin is China.
11. Features – shutdown when heated and dropped.

1. Fast heating.
2. Quiet work.
3. Ease of movement thanks to the legs with wheels.
4. Ease of wall mounting.
5. Excellent heat dissipation.
6. Possibility to change location.
7. Excellent build quality.
8. Quick heating of a room of 15-20 sq. meters.
9. Price quality.

1. Lack of a handle.
2. Strong body heat.

Hyundai Loft H-HV18-15-UI1322 is a reliable and time-tested electric convector. It is distinguished by noiselessness, the presence of two heating modes, light weight and reasonable price. It is on the third line of the rating.

2. Scarlett SCA H VER31 1500

Electric convector with copper thermostat. It has a 2-stage power adjustment, which allows you to choose the optimal mode, taking into account the weather and power.

Convenient wheels allow you to move the device without damaging the parquet or other surface.

The presence of several color options allows you to choose the device, taking into account the interior design.

1. Heating area, m2 – 15.
2. Power, kW – 1500.
3. Management is mechanical.
4. Type of heating element – needle.
5. Dust and moisture protection class – IPX
6. Installation – on the floor / wall.
7. Dimensions, m – 0,615×0,27×0,495.
8. Weight, kg – 4,6.
9. Warranty, years – 1.
10. The country of origin is China.
11. Features – thermostat, overheating protection, operation mode indication.

1. Quality heating.
2. Doesn’t dry out the air.
3. Economical.
4. Effective appearance.
5. Uniform heat dissipation.
6. Convenient chassis.
7. Reliable thermostat.

1. Strong body heat.
2. Not suitable for a large room.

Scarlett SCA H VER31 1500 is one of the best models in its class, featuring simplicity, versatility, power step control and easy installation. It is on the second line of the rating.

1. Bravo CH-1500Y

Electric convector, characterized by reliability, simplicity and convenient operation. It has a high degree of protection against moisture and dust. Can be wall mounted or placed on the floor.

The built-in thermostat provides automatic shutdown in case of excess of temperature above admissible level.

To control the operation, a switch with a light indicator is provided. The movement is carried out using a special handle.

1. Heating area, m2 – 15.
2. Power, kW – 1500.
3. Management is mechanical.
4. Type of heating element – needle.
5. Dust and moisture protection class – IP20.
6. Installation – on the floor / wall.
7. Dimensions, m – 0,5×0,33×0,18.
8. Weight, kg – 5.
9. Warranty, years – 1.
10. The country of origin is China.
11. Features – thermostat, overheating protection, waterproof case.

1. Доступная цена.
2. High quality heating.
3. Quiet operation.
4. Light weight.
5. Multiple modes available.
6. Possibility of wall mounting or floor mounting.

1. The appearance of an odor when heating a dusty room.
2. Not suitable for severe frosts.

Bravo CH-1500Y is a modern convector with a high energy safety class, convenient mounting and necessary functions. Received a lot of positive feedback and deservedly is on the first line of the rating.

The best powerful electric convectors with mechanical control

This type of electric convectors allows you to heat rooms with an area of ​​​​20 or more square meters.

More powerful models are distinguished by advanced functional features (discussed below), allowing you to change the temperature based on personal preferences and achieve a high level of comfort.

7. Tefal CQ3030

Reliable convector in a stylish black case with high power and convenient operation.

It features a modern design, a mechanical thermostat, a light indicator of heating, the presence of large handles for transportation.

Wide grill openings ensure fast and even heat distribution. Convenient thermostat allows you to quickly set the desired temperature.

1. Heating area, m² – 20.
2. Power, kW – 2400.
3. Management is mechanical.
4. Heating element type – standard heater.
5. Installation – on the floor.
6. Dimensions, m – 0,505×0,435×0,145.
7. Weight, kg – 4,3.
8. Warranty, years – 2.
9. The country of origin is China.
10. Features – Power/Temperature Control, Indicator Light, Wheels, Heat Cutoff, Thermostat.

The kit comes with everything you need to install and start using. The price is 7199 rubles.

1. Rapid heating of the room.
2. Quiet thermostat.
3. Easy power adjustment.
4. The presence of the mode of maintaining the temperature in the room.
5. Stylish design.
6. Application safety.

1. Weak plastic legs.
2. Lack of wheels.
3. There is no way to hang on the wall.
4. In severe frost, it takes more time to heat up.

Tefal CQ3030 is a model with an original design, high build quality and good functional “stuffing”. It is on the 7th line of our rating.

6. RESANTA OK-2500

A device with a choice of temperature, two power modes and a built-in thermostat. Favorably distinguished by resistance to moisture, noiselessness and safety of operation.

The device does not burn oxygen, is not a source of dust / odors. Depending on the situation, it can be installed on the floor / wall.

2The control is carried out using the handle on the side. There is a mode switch.

1. Heating area, m² – 25.
2. Power, kW – 2500.
3. Management is mechanical.
4. The type of heating element is monolithic.
5. Installation – on the floor / wall.
6. Dimensions, m – 0,942×0,5×0,124.
7. Class of dust and moisture protection — IРX4
8. Weight, kg – 4,8.
9. Warranty, years – 1.
10. The country of origin is China.
11. Features – power / temperature control, moisture protection, shutdown when overheating.

1. Does not burn oxygen and is not a source of unpleasant odors.
2. Complete silent operation.
3. Safety of application, thanks to the built-in thermal sensor.
4. Fast heating.
5. Ease of use.
6. Wheels for movement.
7. Lightness and mobility.
8. Mounting available for wall mounting.

1. Not the best build quality.
2. Electricity costs due to high power.
3. Weak switch.

RESANTA OK-2500 is a high-quality product with an aesthetic and modern appearance, able to cope with room heating even in severe frost. It is on the 6th place in the rating.

5. KALASHNIKOV KVCH-E20M-11

A new type of convector with an X-shaped aluminum heater. It is recommended for application as the main and additional heating. It has the 1st class of electrical protection, the possibility of wall or floor installation.

1. Heating area, m2 – 25.
2. Power, kW – 2000.
3. Management is mechanical.
4. Type of heating element – needle.
5. Dust and moisture protection class – IP24.
6. Installation – on the floor / wall.
7. Dimensions, m – 0,83×0,4×0,1.
8. Weight, kg – 4,7.
9. Warranty, years – 1.
10. Country of manufacture – Russia.
11. Features – thermostat, power control, switch with indicator, tip-over shutdown, overheat shutdown, moisture protection.

1. Reliability in operation.
2. Excellent heat dissipation.
3. Two modes of operation.
4. Heat regulator.
5. There are no foreign smells.
6. High-quality assembly.
7. Safety of operation.
8. Modern appearance.

1. There is no operation indicator.
2. Weak leg fittings.
3. High energy consumption.

KALASHNIKOV KVCH-E20M-11 is a model with convenient fastening, modern design and small size. It copes with the functions perfectly and rightfully occupies the third line of the rating.

4. Ball BIHP/R-1500

An advanced device that combines the principle of IR heating and convective flow. It has many functions / modes, creates a comfortable temperature regime.

Able to heat rooms with poor thermal insulation and high ceilings.

It is distinguished by the ability to quickly select the heating level, an enlarged air intake, modernized perforation, splash protection.

1. Heating area, m² – 20.
2. Power, kW – 1500.
3. Management is mechanical.
4. Type of heating element – combined (DX-Power), monolithic.
5. Installation – on the floor / wall.
6. Dimensions, m – 0,64×0,413×0,113.
7. Weight, kg – 4,5.
8. Warranty, years – 1.
9. The country of origin is China.
10. Features – Power/Temperature Control, Indicator Light, Wheels, Hot Cut-off, Thermostat, Overheat/Roll Over Protection.

The cost of the considered model is 7000 rubles.

1. Infrared and convective heating.
2. Simple control.
3. Convenient chassis for moving.
4. Top location of the control panel.
5. Aesthetics and lightness.
6. Ideal for rooms with high humidity.
7. The presence of two modes of operation – with heating of air and objects.
8. Convenient choice of power.
9. Large set of features.
10. High degree of protection, ensuring the safety of use.
11. Modern design.
12. Economical use.
13. High heating rate.
14. Extended warranty period.

1. Less economical than competitors.
2. Weakly heats in rooms with high power.
3. Smell on first use.
4. There is no indication of operation.
5. No display or remote control.

Ballu BIHP/R-1500 is an innovative model that combines two different operating principles. It is distinguished by ease and safety of use, a large set of protections and safety for use. Rightfully located on the fourth line of the rating.

3. Nobo NFK 4S 10

Electric convector of European quality, manufactured using eco-design technology.

The device comes with built-in NCU 1S, designed in Norway and made in Ireland. It has a 10-year warranty period and a resource of 30 years.

The model consumes only 0,5 W in standby mode, is controlled using a thermostat remotely or manually.

Attached to the wall with special brackets or mounted on legs.

1. Heating area, m² – 11.
2. Power, kW – 1000.
3. Management is mechanical.
4. The type of heating element is monolithic.
5. Installation – on the wall.
6. Dimensions, m – 0,725×0,4×0,055.
7. Dust and moisture protection class – IP24
8. Weight, kg – 4,8.
9. Warranty, years – 10.
10. Country of manufacture – Ireland.
11. Features – Thermostat, temperature control, drop/overheat shutdown, moisture protection.

1. High quality device.
2. Quiet operation.
3. European production.
4. Complete set of delivery.
5. Convenient temperature control.
6. Built-in thermostat.
7. Ability to work in a single chain.

1. Relatively low power.
2. High price.

Nobo NFK 4S 10 is a European quality product manufactured using modern technologies. Reliable and with an extended warranty. It occupies the 3rd line of the rating.

2. Noirot Spot E-3 Plus 2000

Electric heaters with high precision electronic thermostat. They have convenient mechanical control and modern design. The front panel is coated with a durable polymer paint for a modern look.

1. Heating area, m2 – 25.
2. Power, kW – 2000.
3. Management is mechanical.
4. The type of heating element is monolithic.
5. Dust and moisture protection class – IP20
6. Installation – on the floor / wall.
7. Dimensions, m – 0,74×0,44×0,08.
8. Weight, kg – 5,6.
9. Warranty, years – 10.
10. The country of origin is France.
11. Features – power adjustment, switch with indicator, auto-restart, anti-freeze function.

1. High quality.
2. French production.
3. Temperature control.
4. Fast heating.
5. Precise temperature setting.
6. Optimal power.
7. Easy installation.
8. No sharp corners in the design.

1. Weak leg design.
2. Short cable.
3. High price.

Noirot Spot E-3 Plus 2000 is one of the best electric convectors with precise temperature control, waterproof housing, reliability and ease of use. The device is in second place in the ranking.

1. Electrolux Heating module ECH/AG2-1500 T + Control unit ECH/TUM

A device made using innovative technology, consisting of a heating module and a removable control unit. Comes with a Hedgehog heater that heats up 20% faster.

The model is compact, has an increased heat transfer area. There is a special air purification system with four filters. There is an oversized air intake.

The control unit is made of special plastic, which is resistant to temperature and shock.

1. Heating area, m² – 20.
2. Power, kW – 1500.
3. Management is mechanical.
4. The type of heating element is monolithic.
5. Installation – on the wall.
6. Dimensions, m – 0,56×0,404×0,091.
7. Dust and moisture protection class – IP24
8. Weight, kg – 3,2.
9. Warranty, years – 3.
10. The country of origin is China.
11. Features – Overheat/rollover shutdown, moisture protection.

1. Energy saving.
2. Fast air heating.
3. Convenient LED screen
4. Three operating modes.
5. USB port for expanding functionality.
6. Complete safety of use.
7. Mechanical control.
8. High performance.
9. Air purification system.
10. Unique cleaning system.
11. Extended warranty.

1. Mechanical control.
2. No wheels included.

Electrolux The ECH/AG2-1500 heating module with a control unit is a modern device with several operating modes and a built-in filter. Differs in compactness and ease of installation. Takes 1st place in the ranking.

The best powerful electric convectors with electronic control

This group includes models that cannot be called budget, but the work efficiency is higher. Previously, electronic control was less reliable than mechanical control.

But with the development of technology, everything has changed, and the reliability of electronics has increased.

Below we will consider the best and most popular models of electric convectors with electronic control, which have received a lot of positive feedback and, above all, for a justified price.

5. KALASHNIKOV KVCH-E20E-11

A device with an IR-shaped heater of a monolithic type, characterized by increased efficiency.

Recommended as a main / additional equipment. Can be used on the floor/wall, electrically controlled, robust housing and high precision thermostat.

To avoid damage, overheating protection is provided, which provides shutdown in case the temperature exceeds the permissible level, there is a thermostat, a timer

1. Heating area, m² – 25.
2. Power, kW – 2000.
3. Management is electronic.
4. The type of heating element is monolithic.
5. Installation – on the wall / floor.
6. Dimensions, m – 0,83×0,40×0,113.
7. Dust and moisture protection class – IP24
8. Weight, kg – 5,5.
9. Warranty, years – 3.
10. Country of manufacture – Russia.
11. Features – Power regulation, timer, indicator light on switch, tip-over/overheat shutdown, moisture protection.

1. Stylish design.
2. High build quality.
3. Easy management.
4. The presence of an ionizer.
5. Simple mounting of rollers.
6. Quality cord.
7. Quiet thermostat relay.
8. There are no unpleasant odors when heated.
9. No extra noise.
10. Доступная цена.
11. Small consumption of electricity.

1. Weak rollers.
2. Permanent glow of the temperature indicator.
3. Short power cord.
4. Tight buttons.

Model KALASHNIKOV KVCH-E20E-11 is a good and inexpensive convector, characterized by simple operation, stability and comparative efficiency.

Suitable for heating rooms with different areas. It is in fifth place in our ranking.

4. Electrolux ECH/AG-1500 PE

Convector for heating a room up to 8 sq. meters. It features a compact design, the ability to mount on the wall even in the most compact rooms.

The functionality of the model allows you to accurately set the heating mode, set the shutdown timer. A convenient display allows you to control the convector.

Protection IP 24 guarantees safety in case of water on the surface, which allows you to install the converter even in the bathroom.

1. Heating area, m2 – 20.
2. Power, kW – 1500.
3. Management is electronic.
4. The type of heating element is monolithic.
5. Dust and moisture protection class – IP24
6. Installation – on the wall.
7. Dimensions, m – 0,135×0,22×0,98.
8. Weight, kg – 5,47.
9. Warranty, years – 3.
10. The country of origin is China.
11. Features – two heating modes, precise temperature setting in the range of 1.0%, 24-hour timer, switch with indicator.

1. Quiet work.
2. Stylish appearance.
3. Convenient control box.
4. Rapid heating of the room.
5. Maintain heat even at half power setting.
6. Clear digital display.
7. Automatic control.
8. Good functionality.

1. Wall mount only.
2. Slight deformation of the gratings during long-term operation.
3. Weak airflow.
4. Clicking of heating elements during cooling.

Electrolux ECH/AG-1500 PE is a reliable convector with good assembly, fast heating and electronic control unit. Works great, reliable and safe to use. It occupies the fourth place in the ranking.

3. Ball BEC/EVI-2500

One of the best convectors in its series, equipped with a Hedgenog element and a Digital Inverter control unit.

The use of the latter allows you to save up to 70% of electricity compared to other models. This feature is ensured by smooth power adjustment.

In addition, the device has two modes of operation (automatic and user), small size and the ability to use on the floor or wall.

1. Heating area, m2 – 30.
2. Power, kW – 2500.
3. Management is electronic.
4. The type of heating element is monolithic.
5. Installation – wall/floor
6. Dimensions, m – 0,8×0,127×0,413.
7. Dust and moisture protection class – IP
8. Weight, kg – 5,33.
9. Warranty, years – 3.
10. The country of origin is China.
11. Features – Thermostat, timer, inverter type power control, tip over/overheat shutdown, moisture protection.

1. Rapid heating of the room.
2. Stylish design.
3. Automatic regulation of heating activity.
4. High quality.
5. Several operating modes.
6. Small power consumption.

Disadvantages:

1. You can hear the relay turning on and off a little.
2. Too bright LED, which illuminates the room at night.

Ballu BEC/EVI-2500 is an excellent convector that solves heating issues. Cost-effectiveness, the presence of a simple regulator, a module with WiFi control makes this device one of the best solutions.

The model is on the third line of our rating.

2. Electrolux Heating module ECH/AG2-2500 T + Control unit ECH/TUE white

Device with an X-shaped monolithic heater, two heating modes and moisture protection. The versatility of the convector is due to the possibility of mounting it on a wall or ceiling, reliability and a special cleaning system with four filters.

The aerodynamic system increases the convective flow by 37%, which speeds up the heating of the room.

Additional features include LED-display, 24-hour timer, button lock option.

1. Heating area, m² – 30.
2. Power, kW – 2500.
3. Management is electronic.
4. The type of heating element is monolithic.
5. Installation – on the wall / floor.
6. Dimensions, m – 0,8×0,404×0,091.
7. Dust and moisture protection class – IP
8. Weight, kg – 4,6.
9. Warranty, years – 3.
10. The country of origin is China.
11. Features – thermostat, timer, power control, programming mode, tip-over / overheat shutdown, moisture protection, case heating up to 60 degrees Celsius.

It comes with a wall mount, and the chassis for floor installation must be purchased separately. The cost of the device is 9580 rubles.

1. Modern appearance.
2. Electronic control.
3. High efficiency heater.
4. Timer.
5. Quiet operation.
6. Multi-stage air purification.
7. Delay start.
8. Child lock.
9. Electronic control unit.

1. There is no adjustment of the LED display, so strong brightness can interfere at night.
2. The need to separately purchase a chassis for outdoor use.

Electrolux The ECH/AG2-2500 T heating module with a control unit is a reliable model with a digital display, many functions, overheating protection and an aerodynamic body. It is on the second line of the rating.

1. Noirot CNX-4 Plus 2000 white

An excellent choice for large spaces. The electric convector has a reliable thermostat with the ability to smoothly adjust the temperature, a compact body and special wall mounts.

The presence of a grate in the upper part ensures an even distribution of the warm flow throughout the room.

The temperature is set using a mechanical thermostat and maintained electronically. The body is made of metal, which eliminates thermal deformation, damage due to splashes and defects from accidental impacts.

1. Heating area, m² – 25.
2. Power, kW – 2000.
3. Management is electronic.
4. The type of heating element is monolithic.
5. Installation – on the wall / floor.
6. Dimensions, m – 0,74×0,44×0,08.
7. Dust and moisture protection class – IP
8. Weight, kg – 4,6.
9. Warranty, years – 3.
10. The country of origin is France.
11. Features – thermostat, smooth temperature control, shutdown in case of overheating, moisture protection, indicator light.

The set with an electric convector includes instructions, a bracket for wall mounting and a warranty. The cost is 23690 rubles.

1. High reliability.
2. Fast access to the maximum heating mode.
3. Application safety.
4. Quiet operation.
5. Frost protection available.
6. Easy installation.
7. Automatic maintenance of the desired temperature.
8. Stylish design.
9. No unpleasant sounds or odors.

1. High price.
2. Legs must be purchased separately.

Noirot CNX-4 Plus 2000 is a simple and powerful converter with low weight, high quality build and fast heating. Rightfully ranked first.

The most efficient models, the best value for money

When buying such devices, you will have to pay a large amount, but they are more efficient and help to quickly warm up the house. If you have children in the house, it is especially important to fork out for one of these models.

We offer for consideration the 5 best electric converters, which are optimal in terms of price and quality, with a quick heating effect.

5. NeoClima Comforte T2.5 white

Stylish and attractive convector, characterized by fast heating and small overall dimensions.

It only works in a vertical position, so it has an automatic overheating protection system that shuts off when the cover is closed or tip over.

It has an extended factory warranty, modern design and low inertia. It stands out for its economy and quick access to the maximum operating mode.

1. Heating area, m² – 25.
2. Power, kW – 2500.
3. Management is mechanical.
4. The type of heating element is monolithic.
5. Installation – on the wall, on the floor.
6. Dimensions, m – 0,89×0,45×0,11.
7. Dust and moisture protection class – IP
8. Weight, kg – 7,6.
9. Warranty, years – 1.
10. Country of manufacture – Ukraine.
11. Features – shutdown in case of overheating, moisture protection, power regulation.

1. Compactness.
2. Legs included.
3. Function of antifreezing rooms.
4. High power.
5. Доступная цена.
6. Stylish appearance.
7. Fast heating.

1. The first six minutes there may be an unpleasant odor.

The NeoClima Comforte T2.5 model is an excellent model for the money, quickly warming up the room and having the necessary protection. It is considered the best option in terms of price and quality. It occupies the 5th line of the rating.

4. Ballu Camino Eco Turbo BEC/EMT

The model is made using revolutionary technology with a monolithic heater.

By increasing the area by 20%, the work efficiency is increased and the heating time is reduced.

The features include an enlarged air intake, convection uniformity, an overheating protection sensor.

1. Heating area, m² – 30.
2. Power, kW – 2500.
3. Management is electronic.
4. The type of heating element is monolithic.
5. Installation – on the floor.
6. Dimensions, m – 0,83×0,40×0,089.
7. Dust and moisture protection class – IP
8. Weight, kg – 5.
9. Warranty, years – 3.
10. Country of manufacture – Russia.
11. Features – smooth power control, shutdown in case of tipping / overheating, moisture protection.

The device is equipped with legs for floor installation. The cost is 3700 rubles.

1. Доступная цена.
2. Reliability.
3. Fast heating.
4. No foreign odors.
5. High class of protection against moisture / dust, overheating
6. Good build quality.
7. Mechanical control.
8. Stylish design.
9. Convenient sizes.
10. Heating the case to a safe temperature.

1. Weak leg fitting.
2. May interfere with sleep due to noise.

Ballu Camino Eco Turbo BEC/EMT is a compact device with a thermostat, adjustable temperature and two levels of protection. Rightfully placed in fourth place in the ranking.

3. Thermor Evidence 3 Elec

A new generation electronic convector made with HD technology and available for long-term use.

Differs in the original geometrical form providing uniform distribution of heat.

Has four temperature modes, can be installed on the floor or hung on the wall.

The surface does not heat up to elevated temperatures, which eliminates the risk of burns. It has a high precision thermostat, built-in drop sensor and overheating protection.

1. Heating area, m² – 25.
2. Power, kW – 2500.
3. Management is electronic.
4. The type of heating element is monolithic.
5. Installation – on the floor / wall.
6. Dimensions, m – 0,909×0,461×0,092.
7. Dust and moisture protection class – IP
8. Weight, kg – 6,2.
9. Warranty, years – 1.
10. Country of manufacture – Ukraine.
11. Features – anti-dust protection, shutdown indicator light, shutdown when dropped / overheated, waterproof.

1. Fast and high quality heating.
2. Compactness.
3. Wall fixing.
4. High quality build.
5. High power.
6. Automatic support mode.
7. Electronic thermostat.
8. closed heater.
9. Five year warranty.

1. Short wire.
2. Missing legs and wheels.
3. Temperature numbers are hard to see.

Thermor Evidence 3 Elec is a modern convector with great power and affordable price.

There are all the necessary functions, and the high build quality indicates a serious approach of the manufacturer. The device occupies the third line of our rating.

2. Electrolux ECH/R-2500

The converter is made using the Transformer System technology, which allows you to independently select a complete set.

The main element is the Hedgehog heater, which provides 20% faster heating.

The features include a lower temperature of the heater and the housing, which increases the safety of the device.

The use of an aerodynamic system increases the flow by 37% and ensures rapid heating of the room. There is a button lock function (protection from children), a 24-hour timer and three operating modes.

1. Heating area, m² – 30.
2. Power, kW – 2500.
3. Management is electronic.
4. The type of heating element is monolithic.
5. Installation – on the wall.
6. Dimensions, m – 0,83×0,404×0,091.
7. Dust and moisture protection class – IP
8. Weight, kg – 4,6.
9. Warranty, years – 5.
10. The country of origin is China.
11. Features – shutdown in case of overheating, moisture protection, “parental control”.

1. High heat dissipation.
2. Smooth power switching.
3. Ease of installation and management.
4. High efficiency.
5. Adequate cost.
6. Economical consumption of electricity.
7. Fast heating of even a large room.
8. Removable control unit.
9. Two types of mounting.
10. Built-in thermostat.
11. Robust case.
12. Stylish appearance.
13. Simplicity.
14. Changing filters.
15. Economical.

1. The need for a separate purchase of the control unit.
2. Need for accessories.
3. The actual power is slightly lower.
4. Not very high build quality / materials.

The Electrolux ECH/R-2500 model is a reliable device with two heating modes and everything you need for wall mounting. It has a waterproof housing and automatically turns off when overheated. The device is in second place in our rating.

1. Ballu BEC/EVU-2500 heating module + BCT/EVU-I control unit + BFT/EVUR chassis

The device is equipped with a unique Hedgenog heater, which is quiet and provides high heating efficiency.

The model is compact, has a well-thought-out control unit and the ability to save up to 70% of electricity. When buying the maximum configuration, you can reach the payback within a month.

The device is safe, has an enlarged air intake, aerodynamic design of the convection chamber.

The product is certified by the Ministry of Emergency Situations and is safe to use.

1. Heating area, m² – 30.
2. Power, kW – 2500.
3. Management is electronic.
4. The type of heating element is monolithic.
5. Installation – on the wall / floor.
6. Dimensions, m – 0,8×0,404×0,091.
7. Dust and moisture protection class – IP
8. Weight, kg – 5,06.
9. Warranty, years – 3.
10. Country of manufacture – Russia.
11. Features – thermostat, timer up to 24 hours, smooth power control, shutdown in case of tipping / overheating, moisture protection.

1. Fast heating.
2. Automatic maintenance of a comfortable temperature.
3. Smooth inclusions.
4. Reliable chassis.
5. Increased air intake area.
6. Overheating/rollover protection.

1. Short cord.
2. Poor sensor accuracy.

Ballu Heating module BEC/EVU-2500 with control unit and chassis for floor mounting.

It has all the necessary protections that ensure the safety of use, convenient operation and a high degree of protection from moisture. It is in 1st place in the rating.

The most economical electric convectors with the Transformer System

The Transformer System is a modern convector selection technology that allows you to assemble the optimal configuration yourself, taking into account functionality requests.

A person has the right to choose one of four heating modules, a suitable installation option, an optimal control unit and additional removable modules.

By choosing the right elements, you can assemble the device in a few minutes. Below are a few popular devices representing this line.

As a rule, such convectors support digital INVERTER technology, which saves up to 70% of electricity.

Model Electrolux Heating module ECH/AG2-2500 T + Control unit ECH/TUE – already mentioned above.

2. Ballu Heating module BEC/EVU-2000 + Control unit BCT/EVU-I

A series of convectors with a modern design and the ability to independently form a suitable set of elements. Equipped with a reliable Hedgehog heating element, which is compact and efficient.

1. Heating area, m2 – 25.
2. Power, kW – 2000.
3. Management is electronic.
4. The type of heating element is monolithic.
5. Dust and moisture protection class – IP20
6. Installation – on the wall.
7. Dimensions, m – 0,64×0,404×0,091.
8. Weight, kg – 3,6.
9. Warranty, years – 3.
10. The country of origin is China.
11. Features – power regulation, power indicator light, inverter technology, timer, overheating protection.

1. Modern design.
2. Wide functionality.
3. It is possible to connect via Wi-Fi.
4. Compactness.
5. Reduced power consumption.
6. Fast heating.
7. Backlit screen.
8. Five modes.
9. Holds temperature well.

1. Many accessories have to be purchased separately.
2. It is required to take the chassis for floor installation.

Ballu Heating module BEC/EVU-2000 + Control unit BCT/EVU-I is a reliable convector that quickly heats the room to the required temperature. Easy to manage and configure, has a wide range of functions. It is in second place in the ranking.

1. Convector Electrolux ECH/R-2000 T-TUI + control unit

The device includes a heating module and a removable control unit. The convector has a modern power supply circuit that provides a smooth change in the power of the heating unit depending on the difference between the set and actual temperature.

The control unit has a digital inverter with a USB connector that allows you to expand the functionality.

The Bullet Sensor provides control of parameters with the minimum error.

1. Heating area, m2 – 25.
2. Power, kW – 2000.
3. Management is electronic.
4. The type of heating element is monolithic.
5. Dust and moisture protection class – IP20
6. Installation – on the wall.
7. Dimensions, m – 0,64×0,404×0,091.
8. Weight, kg – 3,6.
9. Warranty, years – 3.
10. The country of origin is China.
11. Features – display, temperature control, thermostat, timer, inverter control, shutdown in case of overheating or tipping over.

1. Informative display.
2. Touch control.
3. Optimum converter power.
4. Convenient settings.
5. Possibility of remote blocking.
6. High build quality.
7. Lots of extra features.
8. Small size.
9. Overheat protection.

1. The need to purchase equipment.
2. High price.

The Electrolux ECH/R-2000 T-TUI convector + control unit is a modern inverter with optimal power, a light indicator and a display. The device has received many positive reviews. It is at the top of the list.

Brand rating

Today, many manufacturers produce electric convectors, and their total number is more than 100. The most popular include Ballu, Electrolux, Noirot, Timberk, Atlantic and others. Let’s take a quick look at their features:

1. Balu is an industrial concern specializing in the creation and manufacture of climate / engineering equipment. The company is one of the leaders in the CIS, Russia and Eastern Europe. The company’s products are delivered to more than 30 countries every day, and the concern itself cooperates with many large companies. All brand products meet Russian and international standards, are made from environmentally friendly materials, and have 46 own patents.
2. Electrolux is a Swedish company that occupies a leading position in the manufacture of professional / household appliances. Every year, over 60 million goods are manufactured and sold in more than 150 countries. The main office is located in Stockholm. In addition to electric converters, the company produces household chemicals / appliances, washing machines, dishes, wine cabinets, refrigerators and more.
3. Noirot is a French brand that manufactures heating household appliances. The company was founded in 1930 in Paris, and already in 1936 the production of heaters began. Today, the company produces many models, and the laboratories are equipped with only modern equipment. During its activity, the manufacturer has received many certificates and awards that are recognized all over the world.
4. Timberk is a Russian brand that manufactures climate equipment. It has been operating on the market since 2004 and in a short time has managed to attract the attention of buyers and win a reliable place in the market. The company produces not only electric convectors, but also water heaters, split systems, thermal curtains, air washers and more. The full list includes more than 120 items of products that are made in Belarus and China.
5. Atlantic is a company that owns about two dozen factories around the world. It has a multi-level control system, ultra-modern equipment and qualified personnel. Atlantic electric convectors have been manufactured since 1972 and are sold in more than 70 countries. The company offers reliable warranty and post-warranty service.

In addition to those discussed above, it is worth highlighting other manufacturers – StarWind, Neoclima, etc.

Types of heating elements, which is better

Depending on the model, the following types of heaters are used in electric converters:

1. Monolithic. It has an X-shape, made of a single composition. It has a low noise level, it is as efficient as possible, but they have a high price.
2. TEN. Classic heater in the form of a spiral. Heats up to 200 degrees Celsius. Often has ribs to increase the heating space.
3. Carbon. Consists of a spiral made of carbon material. Quartz tubes are placed inside. Has the minimum power consumption, efficiency, fast heating of environment and unlimited term of application.
4. Electric spiral of open type. Heats up to 800 degrees Celsius, can emit an unpleasant odor when burning dust.
5. Halogen. It is a flask with a thread, inside which there is an inert gas and special additives. Heat is transferred based on infrared radiation. The element quickly heats up and gives off heat.
6. Ceramic. The ceramic plate heats the room with the entire area. The device provides good heat transfer at a low surface temperature.
7. Halogen. The work is based on a flask that is inside and filled with an inert gas with various impurities. Heat is transferred based on infrared radiation. The thread heats up quickly and allows you to immediately get the effect of heating.
8. Needle. It features high temperature and fast heating. This type of heater is not suitable for rooms with high humidity.
9. Quartz. It looks like a tungsten filament, which is located in a glass tube and heated to 2000 degrees Celsius. The device emits IR radiation, and a specially designed reflector directs the rays to the desired part of the room.
10. Mycathermic. It is made of thin plates, on the surface of which artificially created mica is placed. Emits waves that heat objects without drying the air. The case does not heat up above 60 degrees.

Choice by area

When buying an electric convector, you need to look at the heating area. This refers to the area that the device can heat.

On average, 1 kW of power indicates the ability to heat up to 10 square meters. meters, but some manufacturers may overestimate this parameter to attract additional buyers. Most often, the heated area is from 8-10 to 20-30 square meters. meters.

Power selection

In the characteristics for electric convectors, the power of the device is also indicated. This is a parameter that corresponds to the power consumption and indirectly indicates the heating capacity.

To select a model, you can use special calculation formulas. So, for an ordinary apartment or office with ceilings of 2,5 m, the following ratio can be taken into account: 1 sq. m – 100 W. For other situations, it is necessary to take into account the level of thermal insulation, the presence of the sunny side, the volume of the room, etc. The average power is from 0,8-1 to 2-2,5 kW.

Protection and safety

Modern electric converters have many special systems that ensure the safe operation of equipment.

The most common measures include:

1. Overheat protection.
2. Shutdown when dropped.
3. Child protection.
4. Motion Sensor.
5. Moisture protection.
6. Open window sensor.

Functions and Features

To draw attention to their product, manufacturers try to add many additional features. The more of them, the higher the cost of the model.

As a rule, modern devices provide the following options:

1. Thermostat.
2. More than two power modes.
3. Temperature adjustment.
4. IR heating.
5. Ionization.
6. Air humidification.
7. Standby heating.
8. Inverter.
9. Programmer.
10. Remote control.
11. Wi-Fi connection.
12. Smartphone control.
13. Display.
14. Wheels for moving.

Here everyone decides whether he is ready to pay for this or another function. But as practice shows, many overpay, because they do not use all the capabilities of the device.

As a result, which converter to choose?

When choosing a model, people are guided by the ratio of the manufacturer and price. If you have the required amount, it is better to take models from Nobo or Noirot manufacturers. This option is suitable not only for rich people, but also for those who appreciate quality.

The next stage of selection is technical parameters. Here the main criterion is power, which is calculated taking into account the area of ​​u1bu10bthe room. The standard calculation method is XNUMX kW per XNUMX cubic meters. m. It shows indicative data, so for accurate results it is better to use calculators on the Internet.

If the device is needed for a summer house, garage or rented accommodation, there is no point in paying attention to the design. The main thing is that the device does its job well.